2013 INFINITI FX change time

Black plate (4,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Foreword Prologue
INFINITI NAVIGATION SYSTEM
HELPDESK CONTACT INFORMATION
For assistance or inquiries about the
INFINITI Navigation System, or to order
updated map data, contact the INFINITI
NAVIGATION SYSTEM HELPDESK at:. ADDRESS: P.O. Box 1588 Orem, UT
84059-992
. E-MAIL: [email protected]
. WEB SITE: www.InfinitiNavigation.com
or www.infiniti.ca.
. PHONES: 1-800-777-0325
. HOURS: 6:00 AM to 5:00 PM (Pacific
Time)
INFINITI CONSUMER AFFAIRS DE-
PARTMENT
For assistance or inquiries about the
INFINITI warranty, service or general ques-
tions, contact the INFINITI Consumer Affairs
Department at:
For U.S. customers
1-800-662-6200
For Canadian customers
1-800-361-4792
FOREWORD
Thank you for purchasing an INFINITI
vehicle.
This user’s manual is for the navigation
system only. This manual contains operat-
ing instructions for the INFINITI Navigation
System offered in your INFINITI vehicle.
Please read this manual carefully to ensure
safe operation of the navigation system.
. Because of possible specification
changes and optional equipment, sec-
tions of this manual may not apply to
your vehicle.
. All information, specifications and il-
lustrations in this manual are those in
effect at the time of printing. INFINITI
reserves the right to change specifica-
tions or design at any time without
notice.
. Do not remove this manual from the
vehicle when selling this vehicle. The
next user of this navigation system may
need the manual.
Condition: Language=NAM_English/

Black plate (11,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
*7,:
Push to adjust the map scale.
*8

Black plate (12,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
2. Getting started
2-4
*3INFINITI controller:
Slide or rotate to highlight an item on
the screen, and pushto select
the highlighted item.
On the map screen, turn to adjust the
map scale.
To scroll the map, slide the controller
in the direction you want to scroll.
“INFINITI controller” (page 2-6)
*4:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*5:
Push to access the system settings.
“8. Other settings”
*6:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*7

Black plate (13,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
CONTROL PANEL (Type C)
IGT0228
*1:
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting destination”
*2INFINITI controller:
Slide or rotate to highlight an item on
the screen, and pushto select
the highlighted item.
On the map screen, turn to adjust the
map scale. To scroll the map, slide the INFINITI
controller in the direction you want to
scroll.
“INFINITI controller”
(page 2-6)
*3:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*4:
Push to access the system settings.
“8. Other settings”
*5:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*6

Black plate (17,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
NAVIGATION SYSTEM STATUS SCREEN
By pushingat any time, a split
screen with audio information that is
always at the top can be displayed.
Each time is pushed, the bottom
part of the screen changes between air
conditioner, fuel economy and navigation
directions.
INFO:
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
JNB0195MWhen a route to the destination is set and the
audio system is on, a screen similar to the one above appears.
*1Turning direction at the next intersec-
tion
*2Name of the next street
*3Distance to the next intersection
*4Distance remaining to the destination
*5Remaining time to the destination
JNB0196MWhen a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.
2. Getting started
2-9
Condition: Language=NAM_English/

Black plate (37,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. After the tone sounds and the icon onthe screen changes from [
] to [],
speak a command.
4. Continue to follow the voice menu
prompts and speak after the tone
sounds until the operation is com-
pleted.
Operating tips
.Speak a command after the tone.
. Commands that are available are al-
ways shown on the display and spoken
through voice menu prompts. Com-
mands other than those that are dis-
played are not accepted. Please follow
the prompts given by the system.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push once to return to the
previous screen.
. Push and hold >to cancel the
command. The message, “Voice recog-
nition is canceled” will be announced.
. Push >to stop the voice
prompt and give the command at once.
Remember to wait for the tone before speaking.
. To adjust the volume of the system
feedback, push the volume control
buttons <+>or<−> on the steering
wheel or use the audio system volume
control knob while the system is mak-
ing an announcement.
VOICE COMMAND EXAMPLES
To use the voice recognition system,
speaking one command is sometimes
sufficient, but at other times it is necessary
to speak two or more commands. As
examples, some additional basic opera-
tions that can be performed by voice
commands are described here.
Example 1: Placing call to phone number
800-662-6200
1. Push >located on the steering
wheel.
IGT0135
2. The system announces, “Would you like
to access Phone, Navigation, Informa-
tion, Audio or Help?”.
3. Speak “Phone”.
JVH0493X4. Speak“Dial Number”.
IGT01375. Speak“800”.
2. Getting started
2-29
Condition: Language=NAM_English/

Black plate (46,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Map settings
3-2
MAP TYPES
Two types of map views are available: 2D
map and BirdviewTM(3D) map.
2D MAP
The 2D map displays the map in a 2-
dimensional environment similar to a road
map.
Screen information
JNC0199X
*1Vehicle icon:
Indicates the current vehicle location
and the direction of travel.
*2Guide point:
Indicates a guide point on the route.
*3Remaining time and distance to
the destination:
Indicates the approximate remaining
time and distance to the destination or
waypoint. This indicator will appear
when a destination or waypoint is set
and route guidance is started.
When the vehicle is not driven on the
suggested route, the screen displays
the direction to the destination and the
distance to the destination from the
current vehicle position.
“Switching estimated arrival time
display” (page 5-29)
*4Suggested route:
Appears in bold yellow during route
guidance.
*5/Direction indicator:
Indicates the directional setting of the
map. Touch the icon to change the
setting.
: North always pointing up.
Condition: Language=NAM_English/

Black plate (53,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Push or. A scale
appears on the right side of the screen.
To view the map in detail, push .
To view a wider area, push .
The scale will automatically disappear
when neither nor OUT> has been pushed for several sec-
onds.
If the scaling operation is not performed
for a specified period of time, the scale
display disappears.
INFO:
Free zoom:
The scale can be changed in smaller steps when
or is pushed and held
than when the button is pushed briefly. When
the button is pushed briefly, the scale can be
changed in large steps.
“Other navigation settings” (page 8-7)
OPERATING WITH CENTER DIAL
IMA0173
1. Turn the center dial when the map
screen is displayed. The map scale is
displayed at the right side of the
screen.
2. Use the center dial to adjust the map scale.
*1Clockwise: Zoom in
*2Counterclockwise: Zoom out
INFO:
Free zoom:
Depending on the setting, using the center dial
to change the map scale may adjust the scale
normally, or it may engage the free zoom (finer
scale adjustment in smaller steps).
“Other navigation settings” (page 8-7)
3. Map settings
3-9
Condition: Language=NAM_English/