2013 INFINITI EX ad blue

*See your Owner’s Manual for information.
01
INSTRUMENT BRIGHTNESS
cONTROL SwITcH*
02
TRIP cOMPUTER S wITcHES
03
LO w TIRE PRESSURE wARNING LIGHT
04
HEADLIGHT AND TURN SIGNAL cONTROL
05 wINDSHIELD wIPER / w
ASHER SwITcH
06
STEERING wHEEL SwITcHE S FOR
AUDIO* / BLUETOOTH® / NAVIGATION
07
INTELLIGENT cRUISE c ONTROL BUTTONS
08
PUSH BUTTON IGNITION
09 w
ARNING SYSTEMS S wITcH*
10
INTELLIGENT BRAKE ASSIST (IBA)
OFF S wITcH*
11
DYNAMIc DRIVER ASSISTANc E SwIT cH*
12
INTELLIGENT KEY PORT
13
TILT / TELESc OPIc STEERING
wHEEL S wITcH*
14
HOOD RELEASE*
15
VEHIcLE DYNAMIc cONTROL (VDc)
OFF S wITcH*
16 c
ONTROL PANEL DISPLAY ScREEN*
17
AUDIO SYSTEM
18
AUTOMATIc cLIMATE cONTROLS
19
FRONT PASSENGER AIR BAG STATUS LIGHT*
01
Behind
steering wheel Behind
steering wheel
On
steering column
0405
08
0910
16
17
18
19
11
1213
14
02
03
0706
15Behind
steering wheel

table of contents
Additional information about your vehicle is also available in your Owner’s Manual, Navigation System Owner’s Manual and at www.InfinitiUSA.com.
• A cellular telephone should not be used for any purpose while driving so full attention
may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat properly secured in child
restraints or seat belts according to their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and supplemental
restraint system (section 1)”, “Monitor, climate, audio, phone and voice recognition
systems (section 4)” and the “Starting and driving (section 5)” of your Owner’s Manual.
new system features Blind Spot warning (BS w) System (if so equipped) ....................2
essential information Loose Fuel c ap ................................................. 3
Tire Pressure Monitoring System (TPMS) ............................ 3
first drive features INFINITI Intelligent Key™ System .................................. 4
Liftgate Release ................................................ 5
Seat Adjustments ............................................... 5
Automatic Drive Positioner (if so equipped) ..........................6
Outside Mirror c ontrol Switch ..................................... 6
Starting/Stopping the Engine ..................................... 7
Headlight control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . 7
w indshield wiper/w asher Switch .................................. 8
c limate c ontrols (if so equipped) .................................. 9
FM/AM/SiriusXM
™ Satellite Radio with cD/DVD Player
(with Navigation System - if so equipped) .......................... 11
USB/iPod
® Interface (models with Navigation System - if so equipped) .... 12
c onventional (Fixed Speed) c ruise control ......................... 12
Intelligent c ruise control (Icc) System (if so equipped) ...............13
Fuel-Filler Door ................................................ 14
system guide Trip c omputer ..................................................... 15
Bluetooth® Hands-free Phone System (if so equipped) ..................15
System Operating Tips ........................................ 16
Bluetooth
® System with Navigation (if so equipped) ................16
Bluetooth® System without Navigation (if so equipped) .............18
Navigation System (if so equipped) ............................... 20
DVD Player (if so equipped) ...................................... 21
HomeLink
® Universal Transceiver (if so equipped) ................... 22

7
Starting/Stopping the Engine
NOTE: It is important to make sure the INFINITI Intelligent
Key™ is with you (that is, in your pocket or purse).

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• If the ignition switch is pushed a second time, the
vehicle will enter the ON mode.

Move the shift lever to P (PArk).

Push the ignition switch to start the engine.
TURNING THE ENGINE OFF

Move the shift lever to the P (PArk) position and apply the parking brake.

Press the ignition switch S tArt/S tOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT c ONTROL

Turn the headlight control switch to the position

01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the


position
02 to turn on the headlights.
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the AU tO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight

control switch to the OFF,

01 or
position
02 .

HIGH BEAM SELE cT

Push the headlight control switch forward
04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
03
01
02
04
05

Trip Computer
when the
button
01 is pressed, the following
modes will appear on the dot matrix liquid crystal
display

02 :
• MPG – Displays the current and average fuel
consumption since the last reset.
• MPG/MPh – Displays the average fuel consumption
and speed since the last reset.
• tIME/MILES – Displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
• rANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• OUtSIDE tEMP – Displays the exterior air
temperature including a low temperature warning feature.
• SEttING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
— Press the

button
03 to cycle through the various setting modes.

— Press the

button
01 to choose the selected menu.

• WArNING – If there are any.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
system guide
15
01
03
02
Bluetooth® Hands-free Phone System (if so equipped)

with an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.

Bluetooth Streaming Audio (models with Navigation
System only) allows you to use a compatible Bluetooth
phone to play audio files on your device. Your
compatible cellular phone can be connected to the
vehicle’s audio system allowing audio files to play
through the vehicle’s speakers.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
Bluetooth® Controls
*Some jurisdictions prohibit the use of cellular telephones while driving.

16
system guide
SYSTEM OPERATING TIPS

close all windows. Surrounding noises may interfere
with system operation and performance.

Press the or
button on the steering wheel to

activate voice recognition.

wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.

Speak in a clear and natural voice without pausing between words.

Look straight ahead and avoid speaking too loudly or too softly.

To go back to the previous command, say “Go back”.

To cancel a voice recognition session, say “Exit” or press and hold the or
button.

To interrupt the system voice and give a command quickly, press the
or
button.

when speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.

To increase or decrease the volume of the voice prompts, push the volume control switches

or
+ on the steering wheel or turn the VOL/ON•OFF control knob on the audio system while

the system is responding.

Voice commands can be used to operate various Bluetooth System features using the INFINITI
Voice Recognition system. For more details, see “INFINITI Voice Recognition System” in your
Owner’s Manual.

If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

The “Help” command can be used to hear a list of available commands at any time.

Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth® System with Navigation* (if so equipped)
cONNE cTING PROc EDURE
NOTE: The vehicle must be stationary when connecting
the phone.

Microphone
*Some jurisdictions prohibit the use of cellular telephones while driving.

17

1. Press the

button
and select the “c
onnect Phone” key.
2. Initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
3. when the connecting is complete, the screen will return to the Phone menu display.
PHONEBOOK SETUP

Depending on your cell phone, the system may automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download to “Handset Phonebook”, 40 entries may be created in
the “Vehicle Phonebook”. This phonebook allows a custom recording for each entry to be
spoken while using the voice recognition system. To create the “Vehicle Phonebook”:
1. Push the

button on the steering wheel
2. Select “Vehicle Phonebook”.
3. Select “Add New” at the top of the screen.
4. choose the method for entering the phonebook entry.
For this example, select “Enter Number by Keypad”.
5. Enter the digits and select “OK”.
6. Select “Voicetag” to record a custom name to speak
when using the Voice Recognition system.
7. Select “Store” and speak the custom name after
the tone.
8. when the voicetag is successfully stored, select
“OK” to save the phonebook entry.
9. After the phonebook entry is saved, it will show a
screen that is ready to call the number. Select “BA cK” to return to the Vehicle Phonebook.

18
system guide
cALLING A PHONEBOOK ENTRY:
1. Press the

button.
2. After waiting for the tone, say “Phone”.
3. After the tone, say “Handset Phonebook” or “Vehicle Phonebook” to select the desired
phonebook.
4. After the tone, say the name of the person as shown on the vehicle’s display of the phonebook.
Depending on the phone, the last name of the contact may need to be spoken before the
first name.
MAKING A cALL:
1. Press the

button.
2. After waiting for the tone, say “Phone”.
3. After the next tone, say “Dial Number”.
4. After the next tone, say “123-456-7891”. You may also say the digits in groups of 3, 3 and
4, respectively. To use this group dialing method, say only the first 3 digits of the phone number
instead of all 10 digits. After the system recognizes the number, it will request the next 3 digits
and finally the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.
RE cEIVING/ENDING A cALL

To accept the call, press the button on the steering
wheel or touch the “Answer” key. To reject the call,
touch the “Reject c all” key.

To hang-up, press the button or touch the
“Hang-Up” key.
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROc EDURE
1. Press the

button on the steering wheel.

The system announces the available commands.
2. Say “c onnect Phone”. The system acknowledges the
command and announces the next set of available
commands.
*Some jurisdictions prohibit the use of cellular telephones while driving.

19

3. Say “Add Phone”. The system acknowledges the command and asks you to initiate connecting
from the phone handset.
4. Initiate pairing from the phone.
• The connecting procedure varies according to each cellular phone model. For detailed
connecting instructions and a list of compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
•
When prompted for a PIN code, enter “1234” from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
5. The system asks for a name for the phone. Say “Yes”. The system acknowledges the command
and registers the cellular phone.
PHONEBOOK

Depending on the phone, the system may automatically download the entire phonebook. For
more information, please visit www.InfinitiUSA.com/bluetooth or the phone’s user guide.

If the phonebook does not download automatically, 40 entries can be individually downloaded.
To manually download entries:
1. Press the

button on the steering wheel
2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”.
4. Using the phone, select an entry to send to the vehicle. Please consult the website above or
your phone’s user guide for specific steps of the phone.
5. The system will speak the transferred entry. c onfirm the entry by saying “Yes” after the tone.
cALLING A PHONEBOOK ENTRY:
1. Press the

button.
2. After waiting for the tone, say “c all”.
3. After the next tone, speak a name of a phonebook entry. For example “Michael Smith”.
4. c onfirm the correct name is recognized by saying “Dial” after the tone.
NOTE: In some cases, names stored using all UPPERcASE letters may not be recognized by the voice
recognition system.
MAKING A cALL:
1. Press the

button.
2. After waiting for the tone, say “c all”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123- 456- 7890”.

You may also say the digits in groups of 3, 3 and 4, respectively. To use this group dialing
method, say only the first 3 digits of the phone number instead of all 10 digits. After the
system recognizes the digits, it will request the next 3 digits and finally the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.