Driving your vehicle
56 5
Use high quality ethylene glycol
coolant
Your vehicle is delivered with high
quality ethylene glycol coolant in the
cooling system. It is the only type of
coolant that should be used because
it helps prevent corrosion in the cool-
ing system, lubricates the water
pump and prevents freezing. Be sure
to replace or replenish your coolant
in accordance with the maintenance
schedule in section 7. Before winter,
have your coolant tested to assure
that its freezing point is sufficient for
the temperatures anticipated during
the winter.
Check battery and cables
Winter puts additional burdens on
the battery system. Visually inspect
the battery and cables as described
in section 7. The level of charge in
your battery can be checked by an
authorized HYUNDAI dealer or a
service station.
Change to "winter weight" oil
if necessary
In some climates it is recommended
that a lower viscosity "winter weight"
oil be used during cold weather. See
section 8 for recommendations. If
you aren't sure what weight oil you
should use, consult an authorized
HYUNDAI dealer.
Check spark plugs and igni-
tion system
Inspect your spark plugs as
described in section 7 and replace
them if necessary. Also check all
ignition wiring and components to be
sure they are not cracked, worn or
damaged in any way.
WARNING - Tire chains
The use of chains may adverse-
ly affect vehicle handling.
Do not exceed 20 mph (30
km/h) or the chain manufac-
turer’s recommended speed
limit, whichever is lower.
Drive carefully and avoid
bumps, holes, sharp turns, and
other road hazards, which may
cause the vehicle to bounce.
Avoid sharp turns or locked-
wheel braking.
CAUTION
Chains that are the wrong size
or improperly installed can
damage your vehicle's brake
lines, suspension, body and
wheels.
Stop driving and retighten the
chains any time you hear them
hitting the vehicle.
85
Specifications, Consumer information, Reporting safety defects
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolumeClassification
Engine oil *1 *2 (drain and refill)
Recommends
4.23 US qt. (4.0 l)API Service SM*3,
ILSAC GF-4 or above
Manual transaxle fluid1.90~2.01 US qt.
(1.8~1.9 l)
HK MTF (SK), HD MTF (H.K.SHELL)
HYUNDAI Genuine transaxle fluid
(API GL-4, SAE 75W/85)
Use the Manual transaxle fluid approved by
HYUNDAI motor company.
Consult an authorized HYUNDAI dealer for details.
Automatic transaxle fluid7.71 US qt. (7.3 l)
MICHANG ATF SP-IV, SK ATF SP-IV
NOCA ATF SP-IV, HYUNDAI genuine ATF SP-IV or other
brands meeting the above specification approved by
Hyundai Motor Co.,
*1Refer to the recommended SAE viscosity numbers on the next page.
*
2Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ-
omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure
in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*
3If the API service SM engine oil is not available in your country, you are able to use API service SL.
87
Specifications, Consumer information, Reporting safety defects
Recommended SAE viscosity
numberEngine oil viscosity (thickness) has
an effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosi-
ty engine oils can provide better fuel
economy and cold weather perform-
ance, however, higher viscosity
engine oils are required for satisfac-
tory lubrication in hot weather. Using
oils of any viscosity other than those
recommended could result in engine
damage.When choosing an oil, consider the
range of temperature your vehicle
will be operated in before the next oil
change. Proceed to select the rec-
ommended oil viscosity from the
chart.
CAUTION
Always be sure to clean the area
around any filler plug, drain
plug, or dipstick before check-
ing or draining any lubricant.
This is especially important in
dusty or sandy areas and when
the vehicle is used on unpaved
roads. Cleaning the plug and
dipstick areas will prevent dirt
and grit from entering the
engine and other mechanisms
that could be damaged.
*1. For better fuel economy, it is recommended to use
the engine oil of a viscosity grade SAE 5W-20 (API
SM / ILSAC GF-4). However, if the engine oil is not
available in your country, select the proper engine oil
using the engine oil viscosity chart.
Temperature Range for SAE Viscosity Numbers
Temperature -30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
Engine Oil
(1.8 MPI) *1
10W-30
5W-20, 5W-30
°C
(°F)
I7
Index
Day/night rearview mirror ..........................................4-48
Electric chromic mirror with homelink system ........4-49
Inside rearview mirror ................................................4-48
Outside rearview mirror ............................................4-53
Mounting bracket for roof carrier ..............................4-128
Occupant classification system ....................................3-45
Odometer ......................................................................4-60
Oil (Engine) ..................................................................7-27
Outside rearview mirror ................................................4-53
Outside temperature ......................................................4-60
Overheats ........................................................................6-8
Owner maintenance ........................................................7-6
Panorama sunroof..........................................................4-38
Parking brake ................................................................7-33
Parking brake - Hand type ............................................5-26
Power brakes ................................................................5-24
Power outlet ................................................................4-123
Power window lock button............................................4-31
Pre-tensioner seat belt ..................................................3-22
Push starting ....................................................................6-7Rear seat ........................................................................3-11
Rearview camera ..........................................................4-82
Recommended cold tire inflation pressures ..................7-44
Recommended lubricants and capacities ........................8-5
Recommended SAE viscosity number ........................8-7
Refrigerant label ..............................................................8-9
Remote keyless entry ....................................................4-14
Replacement light bulb ................................................7-71
Reporting safety defects ................................................8-12
Road warning ..................................................................6-2
Rocking the vehicle ......................................................5-49
Roof antenna ..............................................................4-130
Scheduled maintenance service ......................................7-8
Maintenance under severe usage conditions ..............7-21
Normal maintenance schedule ....................................7-9
Seat belt precautions ....................................................3-25
Seat belt warning ..........................................................3-18
Seat belts ......................................................................3-17
Hight adjustment ........................................................3-20
Pre-tensioner seat belt ................................................3-22
Seat belt - Driver's 3-point system ............................3-19
Seat belt precautions ..................................................3-25
Seat belt warning ........................................................3-18
O
P
R
S