Page 9 of 13

1415
Entering a Destination Using Voice CommandsUsing the Find Nearest Command
Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Set a destination using a street address. For other destination options, see your
Navigation Manual.
Map Screen Legend
N A V I G A T I O N( i f e q u i p p e d )Real time navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Press and release the Navi Talk button before you say a command.
1. From the map screen, say “Find
nearest ATM.”
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to destination.
\f. Say the number next to the
destination you want to select.
4. The system displays the “Calculate route to” screen.
Say “OK” to set the route.
\birection of destination
Calculated route \bistance to go
Time to go
Current vehicle
location
Press and release the Navi Talk button before you say a command.
1. Say “Display menu.”
Say “Address.”
2. Say “Street,” then say the street
name on the following screen.
Do not include the direction (N,
S, E, W) or type (St., Ave., Blvd.,
etc.).
\f. A list of street names appears. Say the number next to the
street you want to select. 4. Say
the entire street address
number. For example, “1 2 \b 4.”
If necessary, say “Done”to
proceed.
5. If the street address is in more than one city, a list of city names
appears. Say the number next to
the city you want to select.
6. The system displays the “Calculate route to” screen. Say
“OK” to set the route.
13 Ridgeline TRG_ATG\A_NEW STYLE 9/4/20\A12 10\f30 AM Page \A9
Page 10 of 13

161\b
B L U E T O O T H® H A N D S F R E E L I N K®( i f e q u i p p e d )Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is compatible with the system.
Pairing Your Phone
Press and release the HFL Talk button before you say a command.
Press and release the HFL Talk button before you say a command.
Making a Call
1. Say“\fall” or “Dial” and the
desired phone number.
2. Say “\fall”or “Dial” to continue.
Receiving a Call
\f. The call is connected and heard
through the vehicle’s speakers.
HFL Talk button: Give HFL
commands or answer incoming calls.
HFL Back button: End a call, go back
to the previous command, or cancel an
operation.
1. Enable discovery mode on
your phone.
2. If no phone has been paired before, the system gives you
instructions.
If you are pairing an
additional phone, say “Phone
setup,” then say “Pair.”
\f. HFL gives you a four digit code that appears on the
MID. 5. HFL asks you to name the
phone. For example, say
“Mary’s phone.” The phone is
now added.
4. Search for HandsFreeLink
from your phone, and enter
the code when prompted.
Connect to HFL.
Pressthe HFL Talk button to
accept the call.
Press the HFL Back button to
end or decline the call.
A notification is heard and the
following screen appears on
the MID.
13 Ridgeline TRG_ATG\A_NEW STYLE 9/4/20\A12 10\f30 AM Page \A10
Page 11 of 13

1819
Press and release the HFL Talk button before you say a command.
HFL Phonebook
1. Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials.
2. Say “Store.” \f. Say
the name of the contact,
and then the phone number.
4. To call a contact once an entry is stored, say “\fall Mike.”
Press and release the Navi Talk button before you say a command.
Cellular Phonebook *
1. Say “Display Information.”
Say “\fellular Phone.”
Import your entire cell phone’s address book to the navigation system.
*not available on all phones
2. Say
“Import \fellular
Phonebook.” \f. HFL begins to import your
contacts to the system.4. To call a contact, say “Search
Imported Phonebook” and select
the name and number.
R E A R V I E W C A M E R A
How It Works
• When you shift into Reverse, a real time image of the area behind your vehicle is shown, along with helpful parking guide lines on model\4s without navigation.
• The display turns off when you shift out of Reverse.
Press and hold the power button
for \f seconds to turn the guide lines
off. Repeat to turn back on.
For added convenience, the area behind your vehicle is displayed to help you navigate
while in Reverse (R).
Mode\bs wi\fhou\f naviga\fion Mode\bs wi\fh naviga\fion
Press ZOOM (s\bt) to adjust the
screen brightness.
13 Ridgeline TRG_ATG\A_NEW STYLE 9/4/20\A12 10\f31 AM Page \A11
Page 12 of 13