2013 HONDA CR-Z Technology Reference Guide

\f5
ECO Assist Scoring
Monitors the fuel efficiency of your driving style in real time and converts results
into leaves, which are displayed in a series of five “plant” icons on the MID.
Once you start your vehicle, make sure the MID shows the Ecological Drive
Display on the display to view your Eco Assist score in real time.
As you drive, you earn leaves if you
drive in a fuel\befficient manner, or
lose them if you drive inefficiently.
When you turn the ignition
off, your drive cycle and
lifetime score are displayed
on the MID.
Eco Score
Each time you reach
a new stage, a Stage
Up Recognition icon
briefly appears on
the MID. When you
reach the highest
ranking, a trophy
icon briefly appears.
Drive Cycle
Score
Stage \bStage 2Stage 3
LifetimeScore
First Stage Up Recognition Second Stage Up
Recognition Last Stage Up
Recognition
\f4
Auto Idle Stop
While driving, the
engine is on. A U T O M A T I C T R A N S M I S S I O N
At a stop with the
brake pedal
pressed, the engine
turns off. When you take your
foot off the brake
pedal, the engine
turns back on.
While driving, the
engine is on. M A N U A L T R A N S M I S S I O N
At a stop with the
brake pedal pressed
and the transmission
in neutral, the
engine turns off. When you take
your foot off the
brake pedal and
fully depress the
clutch, the engine
turns back on.
DECELERATESTOPRESTART
Note: Auto Idle Stop only functions if you co\5me to a stop while driving with the
transmission in D or N position.
Shuts the engine off at a stop to maximize f\2uel efficiency. Idle stop occurrence and
duration varies depending on the selected drive mode, ambient conditions, and IMA
battery condition. See your Owner’s Manual for more information.
How It Works
IMA Gauge
Shows when the IMA motor is assisting the engine or charging the battery.
Note: IMA assist may not operate in extreme temperatures, or if the battery is low on charge.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f14 AM Page 9

R E A R V I E W C A M E R A ( m o d e l s w i t h o u t n a v i g a t i o n )
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
M ULT I V IE W R EA R C AM ER A ( m odels w it h n avig atio n)
For ad ded con venience , the ar ea behind y our vehicle is displa yed to help y ou navigate
while backing up .
\f7\f6
Parking Guide Lines
How It Works
 When you shift into Reverse (R), a real-time image
of the area behind your vehicle is shown in the
navigation display.
 The rearview display turns off when you shift out of Reverse.
Switching Views
There are three rearview modes: wide
(default view), normal, and top down.
 Select the corresponding icon to change
views.
 Press
ZOOM (
) or() to adjust the
screen brightness.
Wide (default)
Normal
Top down
 Yellow parking guide lines also appear to help you judge distance. They can be turned on or
off.
 Press and hold CANCEL until the guide lines turn on or off. They remain off until you
turn them on again.
How It Works
• When you shift into Reverse (R), a real\btime image of the area behind yourvehicle is shown in the rearview mirror, along with helpful parking guide lines.
• The display turns off when you shift out of Reverse.
• Press and hold the power button for 3 seconds to turn the guide lines off.
Repeat to turn back on.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f14 AM Page 10

V O I C E R E C O G N I T I O NTo keep your eyes on the road and hands on the whe\Hel, use voice commands for
handsfree calling, navigation, audio, and climate control. For a full list of all sy\Hstem
commands, say“Display infor\fation” and “Voic\b Info.”
Key Functions by Voice Command
B L U E T O O T \b® \b A N D S F R E E L I N K®p. 28
A U D I Op. 21
C L I \f A T Ep. 21
N A V I G A T I O Np. 22
Control four different systems with the steering\H wheel buttons and the ce\Hiling
microphone.
\bo reduce the potential\c for driver distraction, certain manual and
touchscreen functions may \fe inopera\fle or grayed out while the v\cehicle is
moving. Voice commands are always availa\fle.
Voice Command Tips
• Press and release
the Talk button, wait for a beep, then say a command.
• \bll available voice commands are highlighted in blue\H when you press the Talk button.
• For a list of available commands, press and release the Talk button and say
“H\blp.”
• Speak in a clear, natural voice.
• Reduce all background noise.
• \bdjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
• The system also uses a touch\Hscreen display. You can select options by touching them on the screen. This is limited while \Hthe vehicle is moving.
1819
PickUp \futton: \bnswer an incoming
call, or go directly to the Phone screen.
\balk \futton: \five navigation, HFL,
audio, and climate control commands.
HangUp \futton: End a call or decline
a call.
Back \futton: Cancel a command or
return to the previous screen.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A10\f15 AM Page 11

202\f
Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
Press and release the Talk button before you say a command.
G e n e r a l C o m m a n d s(Accepted on most screens to change displays)
• Display map
• Display menu
• Display information
• Display audio
• What time is it?
• Next/previous
(to change pages)• Left/right(to change tabs)• Up/down(to scroll lists up to three pages)
F i n d P l a c e C o m m a n d s(Accepted on Map screen)
• Find nearest: \b ATM \b Honda dealer
\b gas station \b airport
\b Mexican \b hospital restaurant \b bank
\b post office
N a v i g a t i o n C o m m a n d s(Accepted on Map screen)
• How long/far to the destination?
• Display destination map
• Display entire route
D i s p l a y C o m m a n d s(Accepted on Map screen)
• Display/Hide: \b ATM
\b gas station
\b restaurant
\b post office
• Display north up/heading up
• Zoom in/out
• Go home
• Display current location
Press and release the Talk button before you say a command.
A u d i o C o m m a n d s(Accepted on most screens)
• Radio on
• Radio # FM/AM
• Radio preset \f/2/3/4/5/6
• DISC/USB/iPod play
• DISC/USB/iPod skip forward/back
• Auxiliary (AUX) play
H e l p C o m m a n d s(Accepted on most screens)
• Help (list of available commands for current screen)
• Voice info \b from INFO screen (list of all
available commands by category)
P h o n e C o m m a n d s(Accepted on Phone screen)
• Dial
• Speed Dial \f (or 2)
• Redial
• Phonebook
• Phone setup
(Accepted on any screen)
• Dial by number
• Dial by voice tag
C l i m a t e C o n t r o l C o m m a n d s(Accepted on most screens)
• Air conditioner on/off
• Rear defrost on/off
• Climate control recirculate/ fresh air
• Fan speed up/down
• Temperature # degrees (# = 57–87)
• Temperature max hot/cold
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f14 AM Page 12

Map Screen Legend
N A V I G A T I O N ( i f e q u i p p e d )Real\btime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
2223
Entering a Destination Using Voice Commands
Set a destination using a street address. For other destination options, see your
Navigation Manual.
Press and release the Talk button before you say a command.
\f. Say “Display menu.”
Say “Address.”
2. Say “Street,” then say the street
name on the next screen. Do
not include the direction (N, S,
E, W) or type (St., Ave., Blvd.,
etc.).
3. A list of street names appears. Say the number next to the
street you want to select.
Note\f If menu options are grayed out, they are only available using
voice commands. It is recommended that you enter your destination
before driving or when the vehicle is stopped. 5. If the street address is in more
than one city, a list of city names
appears. Say the number next to
the city you want to select.
6. The system displays the “Calculate route to” screen. Say
“Set as destination” to set the
route.4. Say the entire street address
number. For example, “123
\f.” If necessary, say “OK”to
proceed.
Direction of destination
Calculated route
Distance to go
Time to go
Current vehicle
location
Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Using the “Find Nearest” Command
Press and release the Talk button before you say a command.
\f. From the map screen, say “Find
nearest ATM.”
2. A list of the nearest ATMs in your area is displayed by
shortest distance to destination. 3. Say
the number next to the
destination you want to select.
4. The system displays the “Calculate route to” screen.
Say “Set as destination” to set
the route.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f15 AM Page 13

FM Traffic
25
Press and release the Talk button before you say a command.
Displaying Traffic Information
Say“Display traffic” to view highway flow data.
Note:Traffic flow and incident icons are
only displayed on map scales of 5 miles
(8 km) or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data Incident
icon
Incident
icon
Incident
Traffic Icons\f
Construction
Road closed
Weather
Provides continuously updated information, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
\f. Say “Display traffic list” to view
a list of incidents on your
route.
2. Say the number of the incident
you want to avoid. When the
incident appears, say “Traffic
detail.”
3. Say “Avoid,” and the incident
list returns.
4. Say “Reroute” to set the new
route.
Traffic Rerouting
When a destination is already set, you can create a detour to avoid traffic
incidents or congestion.
24
How to Use HFL
HFL Talk button\f Give HFL
commands or answer incoming calls.
HFL Back button\f End a call, go back
to the previous command, or cancel an
operation.
BLUETOOTH® HANDSFREELINK®(models without navigation)
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is Bluetooth\bcompatible.
Pairing Your Phone
You can pair your phone only when your vehicle is stopped.
Press and release the HFL Talk button before you say a command.
\f.Enable discovery mode on
your compatible phone.
2. If no phone has been paired before, the system gives you
instructions.
If you are pairing an
additional phone, say “Phone
setup,” then say “Pair.”
3. HFL gives you a four\bdigit code that appears on the MID. 4.
Search for HandsFreeLink
from your phone, and enter
the code when prompted.
Connect to HFL.
5. HFL asks you to name the phone. For example, say
“Mary’s phone.” The phone is
now added.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f15 AM Page 14

Press and release the HFL Talk button before you say a command.
Making a Call
\f.Say “Call” or “Dial” and the
desired phone number.
2. Say “Call” or “Dial” to
continue. 3. The call is connected and heard
through the vehicle’s speakers.
Receiving a Call
Press the HFL Talk button to
accept the call.
Press the HFL Back button to
end or decline the call.
A notification is heard and the
incoming phone number appears
on the MID.
2627
Press and release the HFL Talk button before you say a command.
HFL Phonebook
\f. Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials.
2. Say “Store.” 3. Say
the name of the contact,
and then the phone number.
4. To call a contact once an entry is stored, say “Call Mike.”
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f15 AM Page 15

2\b29
BLUETOOTH® HANDSFREELINK® (models with navigation)
How to Use HFL
Pairing Your Phone
Press and release the Talk button before you say a command.
\f. Pressthe Pick\bUp button to
go to the Phone screen. A
prompt appears. Say “Yes.”
2. Make sure your phone is in discovery mode, and say “OK.” If your phone does not appear:
Say “Find Another Phone” and
search for a HandsFreeLink
device from your phone.
Connect to HFL.
4. HFL gives you a four\bdigit code. Enter it on your phone when
prompted. The phone is now paired.
3. HFL searches for your phone. Say the number next to the phone
when it appears on the list.
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is compatible.
To reduce the potential for driver distraction, certain manual and touch
screen functions may be inoperable or grayed out while the vehicle is
moving. Voice commands are always available.
Use this pairing method when no phone has ever been paired to the system. You
can pair your compatible phone only when the vehicle is stopped.
1. Press the PickUp button to
go to the Phone screen.
If a prompt appears asking to
connect to a phone, say“No.” 5. Make sure your phone is in
discovery mode, and say “OK.”
6. HFL searches for your phone. Say
the number next to the phone
when it appears on the list.
7. HFL gives you a fourdigit code. Enter it on your phone when
prompted. The phone is now
paired.
If your phone does not appear:
Say
“ F i n d A n o t h e r P h o n e ” and
search for HandsFreeLink from
your phone. Connectto HFL.
2. Say“Phone setup.”
3. Say“Add a new phone.”
4. Say“Search.”
Press and release the Talk button before you say a command.
Pairing Your Phone (continued)
Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
PickUp button\f Answer an incoming
call, or go directly to the Phone screen.
Talk button\f Give HFL commands.
HangUp button\f End a call or decline
a call.
Back button\f Cancel a command or
return to the previous screen.
13 CRZ TRG_ATG_NEW \ASTYLE 10/3/2012 \A11\f15 AM Page 1\b