2013 HONDA CR-V Owners Manual

Page 329 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 328
Handling the Unexpected
Shift Lever Does Not Move
Follow the procedure below if you cannot move the shift lever out of the (P 
position.
1.Set the parking brake.
2.Remove the key from the ignition

Page 330 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 329Continued
Handling the Unexpected
Overheating
How to Handle Overheating
Overheating symptoms are as follows:
•The temperature gauge needle is at the   mark or the engine suddenly loses 
power.

Page 331 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual uuOverheatinguHow to Handle Overheating
330
Handling the Unexpected
■Next thing to do
1.Check that the cooling fan is operating and 
stop the engine once the temperature 
gauge needle goes down.
uIf

Page 332 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 331
Handling the Unexpected
Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator Comes On
■Reasons for the indicator to come on
Comes on when the engine oil pressure is low.
■What to do

Page 333 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 332
uuIndicator, Coming On/BlinkinguIf the Malfunction Indicator Lamp Comes On or Blinks
Handling the Unexpected
If the Malfunction Indicator Lamp Comes On or Blinks
■Reasons for the indicator lamp

Page 334 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 333
uuIndicator, Coming On/BlinkinguIf the Brake System Indicator Comes On (Red)
Handling the Unexpected
If the Brake System Indicator Comes On (Red)
■Reasons for the indicator to come on
•The bra

Page 335 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 334
uuIndicator, Coming On/BlinkinguIf the Low Tire Pressure Indicator Comes On
Handling the Unexpected
If the Low Tire Pressure Indicator Comes On
■Reasons for the indicator to come on
A tire press

Page 336 of 361

HONDA CR-V 2013 RM1, RM3, RM4 / 4.G Owners Manual 335Continued
Handling the Unexpected
Fuses
Fuse Locations
If any electrical devices are not working, 
turn the ignition switch to LOCK (0 and 
check to see if any applicable fuse is blown.
Fuse locati