2013 FORD TRANSIT CONNECT open hood

[x] Cancel search: open hood

Page 6 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Maintenance 172
General information...................................172
Opening and closing the hood............................173
Under hood overview..................................175
Engine oi

Page 174 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Working with the Engine On
WARNING:To reduce the risk of vehicle damage or personal
burn injuries, do not start your engine with the air cleaner
removed and do not remove it while the engine is runnin

Page 177 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual ENGINE OIL DIPSTICK
ENGINE OIL CHECK
Refer to theScheduled
Maintenanceinformation for the
appropriate intervals for checking
the engine oil.
1. Make sure the vehicle is on level
ground.
2. Turn the en

Page 190 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual ADJUSTING THE HEADLAMPS
The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident, the alignment of your headlamps
should be checked by your autho

Page 192 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Headlamp Bulbs
WARNING:Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb by only its plastic base
and do not touch the glass. The oil from your hand

Page 193 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Front Parking Lamp Bulbs
1. Make sure the headlamp control
is in the off position.
2. Open the hood.
3. Remove the bulb service cover by
turning it counterclockwise.
4. Remove the bulb and t

Page 194 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Front Turn Signal Bulbs
1. Make sure the headlamp control
is in the off position.
2. Open the hood.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull t

Page 318 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Engine compartment -
opening ......................................175
Engine oil
checking and adding ......176–177
dipstick ....................................176
filter, specifications ..........