2013 FORD TRANSIT CONNECT mirror

[x] Cancel search: mirror

Page 3 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Steering Wheel 65
Adjusting the steering wheel..............................65
Wipers and Washers 68
Windshield wipers.....................................68
Windshield washers........................

Page 75 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual POWER WINDOWS (IF EQUIPPED)
WARNING:Do not leave children unattended in your vehicle
and do not let children play with the power windows. They may
seriously injure themselves.
WARNING:When closing the

Page 76 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual EXTERIOR MIRRORS
Power Exterior Mirrors (If Equipped)
WARNING:Do not adjust the mirror while your vehicle is in
motion.
A. Left mirror
B. Off
C. Right mirror
To adjust your mirrors:
1. Select the mirr

Page 77 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual The image of the approaching vehicle
is small and near the inboard edge of
the main mirror when it is at a
distance. The image becomes larger
and begins to move outboard across
the main mirror as the

Page 78 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Auto-Dimming Mirror (If Equipped)
Note:Do not block the sensors on the front and back of the mirror.
Mirror performance may be affected. A rear center passenger or raised
rear center head restraint ma

Page 99 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual HEATED WINDOWS AND MIRRORS (IF EQUIPPED)
Heated Rear Window
Note:The ignition must be switched on to use this feature.
Press the button to clear the rear
window of thin ice and fog. Press
the button a

Page 133 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual REAR VIEW CAMERA SYSTEM (IF EQUIPPED)
WARNING:The camera system is a reverse aid supplement
device that still requires the driver to use it in conjunction with
the rear view mirror and the side mirror

Page 134 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Note:When towing, the camera only sees what is being towed behind
the vehicle. This might not provide adequate coverage as it usually
provides in normal operation and some objects might not be seen.
I
Page:   1-8 9-16 next >