in STRUMEn T P An El
1
2
6
8
4
7
45
3
5
* (if equipped)
1. CRUISE Cont
Rol
To set your cruise control speed:
1. Press the on control up and release. 2. Accelerate to the desired speed.3. Press the S et control up and release, then take your
foot off the accelerator.
After your speed has been set you can press S et
+/- to adjust cruise speed. To disable, press the oFF control down.
Ad AptIvE CRUISE C ontRol*
Allows you to set a ‘gap distance’ between yourself and
the vehicle in front of you during highway driving. When
your cruise control is active, press gaP up or down to
select the gap distance. Refer to the Cruise Control
chapter of your Owner’s Manual for more information.
note: Driving aids do not replace the need to watch where the
vehicle is moving and brake where necessary. Refer to your Owner’s
Manual for safety information, more detail and limitations.
2. I nfo RmA tIon dIS plAyS*
Displays information about various systems on your
vehicle. Use the left-hand side, 5-way controls located on
the steering wheel to choose and confirm settings and
messages. Refer to the Information Displays chapter in
your Owner’s Manual for more information.
3. S ERvICE E ngIn E S oon lI ght
illuminates briefly when the ignition is turned on. if it
remains on or is blinking after the engine is started, the
on-board diagnostics system (O bD-ii) has detected a
malfunction. Drive in a moderate fashion and contact your
authorized dealer as soon as possible.
4. tIlt/t ElESC opE S tEERIng C olUmn
Unlock the steering wheel by pulling the lever down. Adjust
the steering wheel to the desired position. Push the lever
back up to lock the steering wheel in place.
5. Infot AInm Ent dIS plAy*
Displays information about Entertainment, Phone,
navigation and Climate. Use the right-hand side 5-way
controls located on your steering wheel to scroll
through, highlight and make minor adjustments within
a selected menu. Refer to the MyFord Touch™ chapter
in your Owner’s Manual for more information.
6. St EERIng whEEl
AU dIo Cont RolS
Press V oL +/- to increase/decrease volume levels.
Press SeeK / to access the next/previous radio station
preset, CD track or preset satellite radio channel*.
Press to access voice recognition. Press to access SYn C® phone features.
7. pUSh bUtton S tARt *
Allows you to start your vehicle by pressing the engine
Start/StoP button, while fully pressing down on the
brake pedal. Press the button again to turn the engine off.
note: Your intelligent access key* must be inside the vehicle for keyless starting to work.
8. hA zARd ContR ol
