2013 DODGE CHARGER SRT service

[x] Cancel search: service

Page 322 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual 20. Seat Belt Reminder LightWhen the ignition switch is first turned to ON/
RUN, this light will turn on for four to eight
seconds as a bulb check. During the bulb check, if
the driver’s seat belt i

Page 323 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call an authorized dealer
for service if your vehicle overheats. If

Page 328 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual •Adaptive Cruise Control (ACC) SET
This light will turn on when the ACC is SET.
For further information, refer to “Adaptive
Cruise Control (ACC)” in “Understanding The
Features Of Your Vehicle

Page 329 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual EVIC Red Telltale Lights
This area will show reconfigurable red telltales. These
telltales include:
•Door Ajar
This light will turn on to indicate that one or
more doors may be ajar.
• Trunk Ajar

Page 330 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual •Electronic Throttle Control (ETC) Light
This light informs you of a problem with the
Electronic Throttle Control (ETC) system. The
light will come on when the ignition is first
cycled ON and remain

Page 352 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual mode. To make your selection, press the Surround Sound
soft-key and select ON or OFF. Then touch the arrow
back soft-key.
Phone / Bluetooth
•Paired Devices
This feature shows which phones are paired

Page 367 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual •Paired Devices
This feature shows which phones are paired to the
Phone/Bluetooth system. For further information, refer
to the Uconnect® Supplement.
SiriusXM Setup
After pressing the SIRIUS Setup

Page 374 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual CD/DVD DISC MAINTENANCE
To keep a CD/DVD in good condition, take the following
precautions:
1.
Handle the disc by its edge; avoid touching the surface.
2. If the disc is stained, clean the surface wit