2013 DODGE CHARGER SRT seat memory

[x] Cancel search: seat memory

Page 105 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual DRIVER MEMORY SEAT — IF EQUIPPED . . . .210
▫ Programming The Memory Feature .........211
▫ Linking And Unlinking The Remote Keyless
Entry Transmitter To Memory .............212
▫ Memory Posi

Page 114 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual Using the mirror control switch, press on any of the four
arrows for the direction that you want the mirror to
move.
Power mirror preselected positions can be controlled by
the optional Memory Seat Fe

Page 212 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual WARNING!
•Be certain that the seatback is securely locked into
position. If the seatback is not securely locked into
position, the seat will not provide the proper sta-
bility for child seats and/or

Page 213 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual The memory seat switch is located on the driver ’s door
trim panel. The switch consists of three buttons: The (S)
button, which is used to activate the memory save
function and the (1) and (2) butto

Page 215 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual NOTE:Your RKE transmitters can be unlinked to your
memory settings by pressing the SET (S) button followed
by the UNLOCK button on the RKE transmitter in Step 4
above.
Memory Position Recall
NOTE:The

Page 216 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual •When you remove the Key Fob from the ignition
(or change the ignition to OFF, for vehicles equipped
with Keyless Enter-N-Go), the driver’s seat will move
about 2.4 in (60 mm) rearward if the driv

Page 234 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual POWER TILT/TELESCOPING STEERING
COLUMN — IF EQUIPPED
This feature allows you to tilt the steering column
upward or downward. It also allows you to lengthen or
shorten the steering column. The power

Page 238 of 599

DODGE CHARGER SRT 2013 7.G Owners Manual •The pedals can be adjusted with the ignition OFF.
• The pedals cannotbe adjusted when the vehicle is in
REVERSE or when the Electronic Speed Control Sys-
tem is on. The following messages will be
Page:   1-8 9-16 next >