2013 DODGE CHALLENGER SRT Owners Manual

Page 361 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual WARNING!
High speed driving with your vehicle under maxi-
mum load is dangerous. The added strain on your
tires could cause them to fail. You could have a
serious collision. Do not drive a vehicle loa

Page 362 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual All Season Tires – If Equipped
All Season tires provide traction for all seasons (spring,
summer, fall and winter). Traction levels may vary be-
tween different all season tires. All season tires ca

Page 363 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual While studded tires improve performance on ice, skid
and traction capability on wet or dry surfaces may be
poorer than that of non-studded tires. Some states pro-
hibit studded tires; therefore, local

Page 364 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual These indicators are molded into the bottom of the tread
grooves. They will appear as bands when the tread depth
becomes 1/16 in (2 mm). When the tread is worn to thetread wear indicators, the tire sh

Page 365 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual WARNING!
Tires and the spare tire should be replaced after six
years, regardless of the remaining tread. Failure to
follow this warning can result in sudden tire failure.
You could lose control and ha

Page 366 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual WARNING!
•Do not use a tire, wheel size or rating other than
that specified for your vehicle. Some combinations
of unapproved tires and wheels may change sus-
pension dimensions and performance char

Page 367 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual •Install on Rear Tires Only.
• Due to limited clearance, the Security Chain Company
(SCC) Super Z6 low profile traction device or equiva-
lent is recommended on P215/65R17, P225/60R18 or
P235/55R1

Page 368 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual CAUTION!(Continued)
•Observe the traction device manufacturer ’s instruc-
tions on the method of installation, operating
speed, and conditions for use. Always use the
suggested operating speed of