2013 Citroen DS3 RHD Owner's Manual

287
06

Enter the same code on the telephone then accept
the connection.
Then accept automatic connection on the telephone to allow the
telephone to reconnect automaticall
y every time the vehicle is started.

The abilit
y of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default.
USING THE TELEPHONE


The " Hands-free mode
" should be used in preference if "Streaming"
is not desired.
The services available depend on the network, the SIM card and the compatibilit
y of the Bluetooth telephone used. Check the telephone manual
and with your network provider for details of the services available to you.
Select a code for the connection thenconfi rm "OK".


Depending on the type of telephone, the system will ask you to
accept or not the transfer of your contacts.

On return to the vehicle,the last telephone connected automaticallyreconnects, within around 30 seconds after switching on the ignition (Bluetooth activated and visible).
To modi
fy the automatic connection mode, remove the pairing and
pair the telephone again with the desired mode.

06USING THE TELEPHONE

Directory / Synchronisation with the telephone

Press PHONE
then select "
Contacts
management " and confi rm.

Select "New contact
" to enter a new contact.

Select "Sort by Name/First name" tochoose the order in which they appear.

Select "Delete all contacts" to delete
the contacts saved in the system.
Selection "Synchronization options":


- No s
ynchronization: only the contacts saved in the system (always present).

- Displa
y telephone contacts: only the contacts saved in the telephone.

- Displa
y SIM card contacts: only thecontacts saved on the SIM card.

- Display all phone contacts:
contacts on the SIM card and in thetelephone.

Select "Import all the entries" to import
all the contacts in the telephone and
save them in the system.

Once imported, a contact remains visible
whatever telephone is connected.

Select "Contact mem. status" to see thenumber of contacts saved in the systemor imported, and the free memory.

289
06

Editing, importing or deleting a contact
Press PHONEthen select "Directory of contacts" and confi rm.
Select the desired contact and confi rm.
Select " Open " to view a contact on the
telephone or modify a contact saved in
the system.
Select " Import" to copy a contact from
the telephone to the system.
Select OK
or press the back button to exit this menu.
Select " Delete" to delete a contact
recorded in the system.
It is not possible to modi
fy or delete contacts in the telephone or theSIM card via the Bluetooth connection.
USING THE TELEPHONE


In the " Directory of contacts
" menu, the import and deletion of contacts is done one by one.

06USING THE TELEPHONE
Press PHONEtwice.
Select " Dial" then confi rm.
Select " Directory of contacts" thenconfi rm.
Dial the telephone number usin
g the
virtual keypad selecting each number in turn.
Confi rm " OK " to make the call.
Pr
ess TELor twice on PHONE.
Callin
g a new number Calling a contact
Select the desired contact and confi rm.
I
f access was via the PHONEbutton,select "Call" and confi rm.
Select the number and confi rm to start
the call.
Making a call Use of the telephone is not recommended while driving. We recommended that you park safely or make use of the steering
mounted controls.

291
06USING THE TELEPHONE


Calling a recently entered number
Pr
ess TEL, select "Call list" andconfi rm,
Select the desired number and confi rm.
To erase the calls log, press PHONE
twice, select " Phonefunctions
" and confi rm then select "Delete calls log
" and confi rm.

Ending a call
Press PHONEthen select "OK" to end
the call.
Or make a long press on TELat the
steering mounted controls.
Or make two short presses on TELat
the steering mounted controls.
Or press the MODE
button, as many
times as necessary, until the telephone
screen is displa
yed.
press PHONE
to display the calls log.
or
Pr
ess "OK" to display the contextual
menu then select " Hang up" andconfi rm.
It is always possible to start a call directly from the telephone; park
the vehicle as a safety measure.

06USING THE TELEPHONE

Receiving a call

An incoming call is announced by a ring and a superimposed displayon the screen.
"Yes " to accept the call is selected bydefault.
Pr
ess " OK" to accept the call.
Select " No" and confi rm to reject the call.

A short press on TELaccepts an incoming call.

A long press on TEL rejects an incomingcall.

293
06USING THE TELEPHONE

Options during a call *
During a call, press the MODE
button
several times to select display of the
telephone screen, then press " OK" to
open the contextual menu.
Select " Private mode " and confi rm totake the call on the handset.
Or select " Hands-free mode
" andconfi rm to take the call via the vehicle'sspeakers.
Select " Put call on hold" and confi rm to put the current call on hold.
Or select " Resume the call" andconfi rm to resume the call on hold.
Select "DTMF ring tones
" to use the
numerical keypad, so as to navigate
through the menu of an interactive vocalserver.

Select "Hang up" to end the call.
*

Depending on the compatibility of the phone and your service plan.
it is possible to hold a 3-wa
y conferencecall by making 2 calls in succession*. Select "Conferencemode call" in the contextual menu accessible using thisbutton.

Or make a short press on this button.

06
Press PHONEtwice.
Select " List of the paired peripherals"and confi rm.
It is possible to:
-
"
Connect" or " Disconnect " theselected telephone,
- delete the pairin
g of the selected
telephone.
It is also possible to select all pairin
gs.

USING THE TELEPHONE

Managing paired telephones

Changing the ringtone
Press PHONEtwice.
Select " Phone functions
" and confi rm.
Select " Ring options" and confi rm.
You can ad
just the volume and the type
of ringtone.
Select " Bluetooth functions".
Select " OK
" and confi rm to save thechanges.