2013 Citroen C4 PICASSO RHD height adjustment

.
11
Familiarisation
1. Headlamp height adjustment. 2.Deactivation of volumetric alarmmonitoring, or
Ticket holder. 3.Lighting and direction indicator stalk4. Steering mounted controls (6-speedelectronic gearbox system/automatic
gearbox).
5
. Speed limiter / cruise control / active cruisecontrol controls.
6.Other steering mounted controls (depending on equipment). 7. Audio system, telephone and navigation (depending on equipment) steeringmounted controls.8.Gear selector lever (electronic gearboxsystem/automatic gearbox).9.
STA R T/STOP button (engine star ting).10.Wiper / screenwash / trip computer stalk.11.
Electronic key reader.12.
Instrument panel. 13.Hazard warning lamps.14 .To u c h screen tablet controls. 15.Deactivation of the DSC system. 16.
Electric parking brake control. 17.Central locking control.


Instruments and controls

12
Familiarisation
Sitting comfortably
Driver's seat
Manual adjustments
1.
Adjustment of the backrest angle of the driver's seat.2.
Adjustment of the cushion height of the driver's seat.3.
Forwards-backwards adjustment.
84
Electric adjustments
1.
Adjustment of the cushion angle andheight, and forwards-backwards position.2.
Adjustment of the backrest angle.
86


Other functions...

Lumbar adjustment.
Massage function. Heated seats.

.
13
Familiarisation
Sitting comfortably


Head restraint adjustment
To raise it, pull it upwards.
To lower it, press on the lug Aand on the headrestraint at the same time.
To incline it, move the bottom forwards or backwards.
88
1.Release. 2.
Adjust for height and reach. 3.
Lock.
Steering wheel adjustment
103
Once these adjustments have been made, check that you can see the instrumentpanel clearly from your driving position.

As a safety precaution, theseoperations must only be carried out when stationary.


Correct driving position

Before taking to the road, adjust in the followingorder:


- the position of the driver's seat(longitudinal, height),

- the height of the driver's head restraint,

- the height and reach of the steering wheel.

.
15
Familiarisation
1. Fastening the buckle. 2.Height adjustment
Squeeze the control to slide it.


Front seat belts
230,231
Centre rear seat belt in the
2nd
row (fastening)
)
Pull the webbing and inser t the tongue Ainthe right hand buckle.)
Inser t tongue B
in the left hand buckle.


Outer rear seat belts
(stowing)
231, 232

Sitting comfortably
Guide the belt in and place the tongue on the
magnet of the outer anchorage.

84
Comfort








Front seats
Manual adjustments
Forwards-backwards
)Raise the control bar and slide the seatforwards or backwards.
When the seat is in the correct position, push
it for wards and backwards without raisin
g thecontrol bar to check that the it has latched.


Driver's seat backrest angle
)
Turn the knob to adjust the seat backrest.

As a safety measure, seat adjustments should only be done when stationary.


Driver's seat height
)Pull the control upwards to raise or push
it downwards to lower, as many times asnecessary, to obtain the position required.
Seat consistin
g of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfor t.

86
Comfort











Front seats
Electric adjustments
Forwards-backwards (driver's
seat)
)Push the control forwards or rearwards toslide the seat.

Seat backrest angle
)
Tilt the control forwards or rearwards to
adjust the angle of the seat backrest.



Seat cushion height and angle
)Operate the rear part of the control
upwards or downwards to obtain thedesired height.)Operate the front par t of the control
upwards or downwards to obtain the
desired angle.

To avoid discharging the battery, carry outthese adjustments with the engine running.

88
Comfort
Additional adjustments
Head restraint height and angle (depending on version)
The head restraint is fitted with a frame with notches which prevents it from lowering; this isa safety device in case of impact.The adjustment is correct when the upper edge of the head restraint is level with the
top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly.
)To raise a head restraint, pull it upwards.)To lower the head restraint, press the lug Aand the head restraint at the same time.)To a djust the angle of the head restraint, tilt its lower part for wards or rear wards.


Removing a head restraint
)
To remove the head restraint, press the lug Aand pull the head restraint upwards. )
To put the head restraint back in place,engage the head restraint stems in the openings keeping them in line with the seat
back and press the lug A at the same time.


Comfort head restraints

Depending on version, you can fold the sides to
obtain a more comfor table position.

91
3
Comfort
Front armrest

Height adjustment
)Fully lower the armrest. )Raise it to the required position (low,
intermediate or high). )Once in the high position, lift to release it and return it to the low position.


Comfor t system for the driver and front passenger.