2013 Citroen C4 PICASSO RHD seats

97
3
Comfort











Third row seats


Concertina boards
Folding the concertina boards)
Remove the luggage net (see the "Bootfittings" section).)
Return the second-row continuity panels to
their initial position and lock them.
) Fold the concer tina boards and position
them vertically. ) Pull on the strap F
located behind the seatbackrest. The backrest pivots rear wards,pulling the seat base with it. The seat locks
in the open position.



Each of the two floor panels can suppor t a load of 100 kg.
Pull on the control, the 3 sections o
f the board will fold like a concertina.
When the third-row seats are upright, these concertina boards can be left either:
- flat behind the seats,
- in the ver tical position,
t
hereby leaving a storage area available.
Repositioning the
seats
Two rigid concertina boards, which cannot
be separated from the vehicle, cover the
2 third-row seats, when these are in the folded position.

98
Comfort
)Return the second-row continuity panels to
their initial position and lock them.
)Lower the head restraints.)Correctly position the concer tina board
ver tically behind the seat.)Check that the seat belts for the 3rd row
seats are correctly fixed to the loops andare not folded. )Pull the strap G , located at the bottom of
the seat backrest. The seat unlocks.

Before moving the third-row seats, return the rigid floor plates of the second-row seats to the upright positionand lock them.
Do not try to fold a third-row seat thathas not first had the backrest fullylocked in place.
Do not leave objects either on or underneath the seat bases of the third-row seats when you are folding them. Do not leave your hand on the control Gas you fold the seats, as you risk trapping your fingers.
Do not allow children to operate the seats without supervision.
)
Next push the backrest gently forwards.
The backrest pivots, folding onto the seat base. The seat base then folds into the stowage area provided for that purpose.) Reposition the concer tina boards over the folded seats.
Folding the seats

99
3
Comfort








Seat modularity and confi gurations


Examples of configurations
5 seats
4 seats
3 seats
Maximum loadspace

100
Comfort
Examples of seat configurations
7 seats
6 seats
Maximum loadspace
5 seats
4 seats
For easy modification of your interior vehicle space, all the rear seatscan be individually folded: onto thesecond-row floor, and under the third-row floor. You can then have a loadfloor that is continuous up to the frontseat backrests.
The seats must only be folded and unfolded with the vehicle stationary.

113
3
Comfort

"Rear" function
)Press this button to activate / deactivate the "Rear" function
The indicator lamp in the button
i
s on when the function is activated.
Settings for
passengers in the
3 rdrow of seats

From the secondary page of the " Airconditioning " menu: This
function gives rear passengers access to
t
he adjustment controls and allows.


- the distribution of air conditioned air to the
vents for the 2 nd row of seats,

- the distribution of ambient air to the vents
for the 3rdrow of seats.
)
Turn the upper wheel to open or close therear vent. )
Turn the lower knob to reduce (to the left)
or increase (to the right) the air flow.
Settings for passengers in
the 2ndrow of seats
) Press the vent cover.)
Adjust the flow of air to the two vents usingthe four-position wheel (off, low, medium, high).
)
Direct the vent by turning the cover.

125
3
Comfort





Rear fi ttings
Aircraft-style rear tables
These tables, fitted to the backs of the front
seats, incorporate a cup-holder recess A
and aretaining strap B.
)
Pull the table downwards to open. )
To stow the table, raise it until the latch locks.
For safety reasons, these tables collapse
downwards if excessive pressure is exer ted on
t
hem. Readin
g lamps Cmay be fitted in the front seat
backrests, behind the tables. They illuminate
the sur face of the tables without disturbing theother passengers.
They can be used only while the table is down. ) Press the "on/off" button to turn the lampon or off.



Individual reading lamps
Rear table stowed Rear table opened

126
Comfort
Side blinds Storage wells
There are two storage wells under the rear
passengers' feet.
To open them, lift the cover at the cutout.
Fitted to the windows for the 2ndrow seats, they protect
the passenger compar tment from the sun's rays.
)Pull the tab A and anchor the blind on the hook B.
12 V acc essory socket
)To connect a 12 V accessory (maximum power: 120 Watts), lift the cover andconnect a suitable adaptor.

130
Comfort
To remove the shelf: )unhook the two cords, )raise the shelf slightly, then remove it.
Rear parcel shelf
There are several options for storing the shelf:
- either upright behind the front seats,
- or flat at the base of the boot. The hooks can be used to secure shoppin
gbags.
Hooks
)Remove the boot carpet for access to thestorage boxes.
Storage boxes

Depending on the configuration, they are laid
out for storing:


- wheel chocks,

- a t
yre repair kit,

- two warning triangles,
-
...