Page 47 of 288
2
Multifunction screens
45
Languages
Once the "Languages" menu has been selected,you can change the language used by the display (Français, Italiano, Nederlands, Portugues,
Portugues-Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been selected, you can change the units of the followingparameters:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
For safety reasons, configuration by thedriver of the multifunction screen must only be done when stationary.
Once the fuel consumption units have been set to mpg, the information in the instrument panel screen on speed and distance will also be in mph and miles.
Page 51 of 288
2
Multifunction screens
49
"Telephone" Menu
With Audio system on, once this menu is selected you can configure your Bluetooth
hands-free system (pairing), view the various
telephone directories (list of calls, ser vices...)and manage your calls (call, hang up, secondcall, secret mode...).
For more information on the "Telephone"
function, refer to the Audio system par t of the"Audio and telematics" section.
Choice of language
Once this menu has been selected, you canchange the language used by the display
(Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portu
gues, Portugues-Brasil,
Türkçe * ).
For safety reasons, configuration by the
driver of the multifunction screen mustonly be done when stationary.
Display confi guration
Once this menu has been selected, you can gain access to the following settings:
- brightness-video setting,
-
date and time setting,
- selection of units.
Once the fuel consumption units havebeen changed to mpg, the informationin the screen relating to speed and distance also changes to mph and miles respectively.
*
Accordin
g to country of destination. Settin
g the date and time )Select the " Set date and time" function
using the " " or " " button. )Press "OK"
to confirm the selection. )Adjust the settings one by one using the " " or "
" button then confirm with "OK". )Then select the "OK"
box in the screenand confirm.
Page 53 of 288
2
Multifunction screens
51
*
According to country.
System language
This menu allows you to select the language
used by the display: Deutsch, English,Espanol, Français, Italiano, Nederlands, Polski,
Portugues, Türkçe * .
Date and time
This menu allows you to set the date and time,
the format of the date and the format of the
time: )Press "SETUP"
. )Select the "Date and time" function andpress the knob to confirm. )Select the "Adjust date and time" function and press the knob to confirm. )Adjust the settings in turn using the
directional arrows, confirming with the knob. )Select the "Date format" function and press
the knob to confirm. )Confirm the desired format using the knob. )Select the "Time format" function andpress the knob to confirm. )Confirm the desired format using the knob.
Display
This menu allows you to set the brightness of
the screen, the screen colour scheme and the colour of the map (day/night or auto mode).
Vehicle
This menu allows you to activate or deactivate cer tain driving and comfort equipment:
- wiper linked with reverse gear (refer to the "Visibility" section),
- guide-me-home lighting and duration(refer to the "Visibility" section),
- parking sensors (refer to the "Driving"section).
Units
This menu allows you to select the units:
temperature (°C or °F) and fuel consumption(km/l, l/100 or mpg).
System
This menu allows you to restore the factory configuration, display the software version and
activate scrolling text.
For safety reasons, configuration of the multifunction screen by the driver mustonly be done when stationary.
Page 61 of 288
3
Comfort
59
Rear screen demist - defrost
Switching on
The rear screen demisting/defrosting can onlyoperate when the engine is running. )Press this button to demist/defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with
the button comes on.
Switching off
The demisting/defrosting switches off automatically to prevent an excessive
consumption of current. )
It is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button
again. The indicator lamp associated with
the button switches off. The control button is located on the heatin
g or air conditioning system control panel.
) Switch off the demisting/defrostingof the rear screen and door mirrorsas soon as appropriate as lower current consumption results inreduced fuel consumption.
With Stop & Star t, when demisting has been activated, the STOP mode is notavailable.
If the engine is switched off before thedemisting/defrosting is switched off automatically, demisting/defrosting will resume next time the engine is switched on.
Page 81 of 288
4
Access
79
Fuel tank
Low fuel level
When the fuel tank minimum level is
reached this warnin
g lamp comes on on the instrument panel. When it first comes on there remains approximately
5 litres of fuel in the tank.
Filling
A label affixed to the inside of the flap remindsyou of the type of fuel to be used depending onyour engine.
Additions of fuel must be of at least 7 litres, in
order to be registered by the fuel gauge.To
fill the tank safely: )the engine must be switched off, ) open the fuel filler flap,
)
inser t the key in the cap, then turn it to
the left,
) remove the cap and hook it onto the cliplocated on the inside of the flap, )
fill the tank, but do not continue after the3rd cut- off of the pump
; this could cause
malfunctions.
When
you have filled the tank: ) put the cap back in place, )
turn the key to the right, then remove it
from the cap,
) close the flap.
You must refuel as soon as possible to avoid
runnin
g out of fuel.
If you run out of fuel (Diesel), refer also to the
"Checks" section.
Fuel tank capacity: approximately
50 litres (petrol) or 46 litres (Diesel) or 37 litres (LPG); (Depending on version:
approximately 30 litres (petrol or Diesel)).
With Stop & Star t, never refuel with the system in STOP mode; you must switchoff the ignition with the key.
The key cannot be removed from thelock until the cap is refitted. Opening the filler cap may create anoise caused by an inrush of air. This vacuum is entirely normal, resulting from the sealing of the fuel system.
Page 82 of 288
Access
80
Quality of the fuel used for
petrol engines
The petrol engines are per fectly compatible
with E10 or E24 type petrol biofuels (containing10 % or 24 % ethanol), conforming to Europeanstandards EN 228 and EN 15376.
E85 type fuels (containing up to 85 % ethanol) are reserved exclusively for vehicles marketed for the use of this type of fuel (BioFlex
vehicles). The quality of the ethanol mustcomply with European standard EN 15293.
For Brazil only, special vehicles are marketed
to run on fuels containing up to 100 % ethanol (E10 0 type).
Quality of the fuel used for
Diesel engines
The Diesel engines are per fectly compatible
with biofuels which conform to current andfuture European standards (Diesel fuel whichcomplies with standard EN 590 mixed with abiofuel which complies with standard EN 14214)available at the pumps (containing up to 7 %Fatty Acid Methyl Ester).
The B30 biofuel can be used in cer tain Diesel engines; however, this use is subject to strict
application of the special ser vicing conditions.Contact a CITROËN dealer or a qualified
workshop.
The use of any other type of (bio)fuel (vegetable or animal oils, pure or diluted,
domestic fuel...) is strictly prohibited (risk of
damage to the engine and fuel system).
Page 83 of 288
4
Access
81
Mechanical device which prevents filling the
tank of a Diesel vehicle with petrol. It avoids
the risk of en
gine damage that can result from
filling with the wrong fuel.
Located in the filler neck, the misfuel prevention
device appears when the
filler cap is removed.
Misfuel prevention (Diesel) *
Operation
When a petrol filler nozzle is introduced into the
fuel filler neck of your Diesel vehicle, it comesinto contact with the flap. The system remains closed and prevents filling. Do not persist but introduce a Diesel typefiller nozzle.
*
According to country of sale.
It remains possible to use a fuel can tofill the tank. In order to ensure a good flow of fuel,do not place the nozzle of the fuel can in direct contact with the flap of the misfuel prevention device and pour slowly.
Tr a v e l l i ng abroad
As Diesel fuel pump nozzles may be different in other countries, the presence of the misfuel prevention device may make refuelling impossible.Before travelling abroad, we recommend that you check with the CITROËN dealer network, whether your
vehicle is suitable for the fuel pumps in the country in which you want to travel.
Page 121 of 288
9
Driving
119
Gear effi ciency indicator
The system adapts its gear change recommendation according to thedriving conditions (slope, load, ...) and the demands of the driver (power,acceleration, braking, ...). The system never suggests:
- engaging first gear,
- engaging reverse gear,
- engaging a lower gear. S
ystem which reduces fuel consumption by advising the driver to change up.
With an electronic gearbox, the system is only active in Manual mode.
Operation
Depending on the driving situation and your
vehicle's equipment, the system may advise you to skip one (or more) gear(s). You can follow this instruction without engaging the
intermediate gears.
The
gear engagement recommendations mustnot be considered compulsory. In fact, the configuration of the road, the amount of traffic
and safety remain determining factors whenchoosing the best gear. Therefore, the driver
remains responsible for deciding whether or not
to follow the advice given by the system.
This function cannot be deactivated. Example:
- You are in third
gear.
The information appears in the instrument
panel in the form of an arrow.
On vehicles with manual gearbox, the arrow can be accompanied by the recommendedgear.
- Yo u
press the accelerator pedal.
- The s
ystem may suggest that you engage ahigher gear.
