3
Comfort
63
Rear seats
Bench seat with fixed one-piece cushion and split backrest (right hand 2/3, left hand 1/3) to adjust the load space in the boot.
Rear head restraints Folding the backrest
They can also be removed. To remove a head restraint: )release the backrest using control 1, )tilt the backrest 2
slightly forwards, )pull the head restraint upwards to the stop, )then, press the lug A
.
)
Move the corresponding front seat for ward if necessary. )
Check that the seat belt is positioned correctly on the side of the seat backrest. )
Place the head restraints in the low position.
With passengers in the rear seats,
never drive with the head restraints removed; they must be in place and correctly adjusted. These have one position for use
(up) and a stowed position (down).
)
Pull control 1
forwards to release the seat backrest 2. )
Fold the seat backrest 2on to the cushion.
Repositioning the seat backrest
When repositioning the seat backrest,take care not to trap the seat belts.
)
Straighten the seat backrest 2
and secure it. )
Check that the red indicator, located next to
the control 1, is no longer visible.
