2013 Citroen C3 PICASSO fold seats

Familiarisation
6

2-position adjustable boot

This adjustable boot floor with two positions
allows you to:


- maximise the volume of the boot,

- par tition the boot
(storing of the rear parcel shelf...),

- obtain a flat floor from the boot opening to
the front seats, when the rear bench seat is
in the folded and fully back position.
1.
Unlocking the vehicle.2.
Opening the boot.
75
10
1A.Interior release lever.
B.Exterior safety catch. C.Bonnet stay.
144

Bonnet

Opening

3
Comfort
61
Table position of the frontpassenger seat
Placing this seat in the table position, with the rear benchseat also in the table position, allows you to transpor t long objects. ) Push the control upwards and guide the seat back forwards to fold it onto the seat cushion.)
To put it back in place, lift up the seat back
and
guide it rear wards until it locks in. With the en
gine running, the front seats can be heated separately.)Use the adjustment dial, placed on the side
of each front seat, to switch on and select
the level of heating required:
0: Off. 1: Low. 2: Medium.3

: High.

Heated seats control

Do not forget to fold the "aircraft" type table fixed on the back of the seat first.
For safety reasons, a passenger sat inthe rear of the vehicle must not placehis feet on the front seat in the tableposition.

Fittings
98
Lift the catch to release the table and unfold it.
Aircraft style tables
Reading lamps are built into the back of the
front seats, behind the tables. With the ignition
on, they illuminate the top of the table without inconveniencing other passengers.
They are only accessible if the table isunfolded. )
Press the button to switch the lamp on or off.


Individual reading lamps
Side blinds

Blinds are available for the side windows.
Pull the side blind longways by the tab to use it.
Always guide the blind slowly using the tab.
Do not place hard or heavy objects on the table. They could becomedangerous projectiles in the event of sharp braking or impact. As a safety precaution, if too much pressure is exer ted the table will fold downwards.

6
Fittings
101
2-position adjustable boot
The two-position adjustable boot floor allowsyou to:


- maximise the volume of the boot,

- par tition the boot
(stowing the rear shelf...),

- obtain a flat floor from the boot opening to
the front seats, when the rear bench seat is
in the folded and fully back position.
Placing the adjustable boot fl oor in the low position
)
Lift the adjustable boot floor by pulling on
the strap. ) Move the adjustable boot floor rear wards
and then down, following the guides on the sides.

Placing the adjustable boot fl oor in the high position
)
Lift the adjustable boot floor by pulling the strap. )
Move the adjustable boot floor rearwards
then up to its high position.
In the high position, the adjustable boot floor
allows stowing of the rear parcel shelf andfragile objects.
The ad
justable boot floor is fitted with four stowing rings to secure your loads using the net
available as an accessory.
Ensure that your boot is empty before handling the adjustable boot floor.