2013 CHRYSLER TOWN AND COUNTRY Owners Manual

Page 257 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual OVERHEAD CONSOLES
Front Overhead Console
Two versions of the overhead console are available.
The base front overhead console model featured fixed
incandescent courtesy/reading lights, flip-down sun-
g

Page 258 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual Courtesy/Interior Lighting
At the forward end of the console are two courtesy lights
(standard dome light has two buttons). The lights turn on
when a front door, a sliding door or the liftgate is open

Page 259 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual The door will slowly rotate to the full open position.
From this position, the door can be fully closed or, by
rotating upward about 3/4 of the way and releasing,
positioned for conversation mirror us

Page 260 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual Rear Courtesy/Reading Lights — If Equipped
The overhead console has two sets of courtesy lights.
The lights turn on when a front door, a sliding door or the
liftgate is opened. If your vehicle is eq

Page 261 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual Rear Overhead Consoles — If Equipped
The rear overhead storage system is available in two
versions: with or without sunroof.
An additional LED at the front of the rear console shines
down on the fro

Page 262 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual Rear Console Halo Lighting
The rear overhead console has recessed halo lighting
around the perimeter of the console base. This feature
provides additional lighting options while traveling and
is contr

Page 263 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual NOTE:HomeLink® is disabled when the Vehicle Secu-
rity Alarm is active.
Before You Begin Programming HomeLink®
Be sure that your vehicle is parked outside of the garage
before you begin programming.

Page 264 of 699

CHRYSLER TOWN AND COUNTRY 2013 5.G Owners Manual NOTE:
•Erasing all channels should only be performed when
programming HomeLink® for the first time. Do not
erase channels when programming additional buttons.
• If you have any problems, or requi