2013 CHRYSLER 200 CONVERTIBLE tire pressure

[x] Cancel search: tire pressure

Page 97 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual Periodic Safety Checks You Should Make Outside
The Vehicle
Tires
Examine tires for excessive tread wear and uneven wear
patterns. Check for stones, nails, glass, or other objects
lodged in the tread o

Page 103 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual CONVERTIBLE TOP OPERATION
CAUTION!
Failure to follow these cautions may cause interior
water damage, stains or mildew on the top material:
•Avoid high-pressure car washes, as they can dam-
age the t

Page 228 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual TOP donE....Convertible Top Up/Down Operation
Is Complete
TOP nOT SECUrE. . . Convertible Top Is Not Secured
LoW tirE...................LowTirePressure
HOTOIL.........Engine Oil Temperature Exceeds
Sa

Page 233 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual NOTE:
The “ESC Off Indicator Light” and the “ESC Activation/
Malfunction Indicator Light” come on momentarily each
time the ignition switch is turned to ON/RUN.
Each time the ignition is turne

Page 234 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual reduces fuel efficiency and tire tread life, and may affect
the vehicle’s handling and stopping ability.
Please note that the TPMS is not a substitute for proper
tire maintenance, and it is the driv

Page 239 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual The EVIC consists of the following:
•Compass Heading Display (N, S, E, W, NE, NW, SE,
SW)
•Mileage (Avg/MPG)•Miles To Empty
•Low Tire Information (Tire Pressure Monitor System
(TPMS) Displays)

Page 242 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual •Remote start aborted — Hood ajar
•Remote start aborted — Trunk ajar
•Remote start aborted — Fuel low
•Remote start disabled — System fault
•Convertible Top Not Secured (with a singl

Page 243 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual 1. Turn the ignition switch to the ON position (Do not
start the engine.)
2. Fully depress the accelerator pedal slowly three times
within 10 seconds.
3. Turn the ignition switch to the LOCK position.
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >