2013 AUDI TT instrument cluster

(!) Power window switches
@
®
©
Door handle
Power locking sw itch
Adjuster control for outside mir- rors ... . ............. .... .
® Air outlets ............... . .
@ Light switch . ... .... ... .. .. .
(J) Turn signa l and high beam . .. .
@ Mu ltifunction stee ring wheel
with:
- Horn
- Drive r's ai rbag .... ... .. .. .
- Shift buttons ..... ... .. .. .
® Instrument cluster
@ Sw itches for
- Windshield wiper/washer
- Menu disp lay ..... ... .. .. .
39
36
47
68
4 2
44
1 12
84
10
48
24
- T rip computer . . . . . . . . . . . . . 23
© Steering lock/ignition/starter
switch (in the steering wheel
column) . . . . . . . . . . . . . . . . . . . 71
@ Adjustab le s teer ing column . . . 71
@ Cruise control . . . . . . . . . . . . . . 76
€3J H ood re lease . . . . . . . . . . . . . . . 180
@ Data L ink Connector (DLC) for
On Board Diagnostics ( OBD II) 30
@ Instrument lighting . . . . . . . . . 46
@ Switches for
- Fuel filler flap release 178
- Rea r lid re lease . . . . . . . . . . . . 3 7
@ Depending on opt ions: Rad io or
nav igat ion system
@ Glove compar tment ( lockable) 6 4
@ Front passenger's a irbag . . . . . 112
@ Rear window defogger sw itch 70
@ C limate controls . . . . . . . . . . . . 6 6
@ Ashtray w ith cigarette lighter . . 62
@ Selecto r l ever o r gears hift lever
- Se lector lever (S tronic) . . . . . 80
- Gearsh ift leve r
@ Switches for
- Audi magnet ic r ide or Sport 80
mode . . . . . . . . . . . . . . . . . . . . 78, 78
Cockpi t 9
- Electron ic Stabilization Con -
trol . . . . . . . . . . . . . . . . . . . . . 150
- Emergency flasher . . . . . . . . . 45
- Ret ractable rear spo iler . . . . . 153
@ Parking brake lever . . . . . . . . . . 7 3
@ Cup holde r .. . . .. . . . . .. .. .. . 62
@ Tips
-Some of the equipment or features
show n in the genera l illustration may be
s tandard equ ipment on your vehicle or
may be opt ional equ ipment depending
on your model. A lways as k your author­
ized Aud i de aler if you have a q ues tion
abou t your vehicle .
- A separate bro ch ure is p rov ided fo r yo ur
fac tory-i nstalled audio sys tem and/or
the A udi Nav igat ion System .

10 Instruments and warning/indicator lights
Instruments and warning/indicator Lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Overv iew of the inst rument cluster
(D Tachometer with time and date
dis play .. .... ..... ........ .
@ Coolant temperature gauge .. .
® Fuel gauge ................ .
© Speedometer with odometer ..
® Set/Check button ..... ... .. .
@ Driver information display
(?) Reset button for
- Trip odometer .......... .. .
- Service indicator
@ Tips
10 ,11
11
12
12
11
22
12
28
- When switching the ignition on, the nee­
dles in the instrument cluster move up­
ward briefly.
- The illumination for the instrument clus ­
ter lights up whenever you switch on the
i gnition with the
vehicle headlights off .
As the daylight fades, the instrument
cluster illumination likewise dims auto­
matically a nd will go out completely
when the outside light is very low. This
feature is meant to remind you to switch
on the head lights when outside light
conditions become poor .
Tachometer (engine rev counter)
The tachometer indicates the engine RPM
(revolutions per minutes) .
en 0
~
~
"'
If engine RPM drops below 1,500, you should
downshift to the next lower gear. The red area
at the end of the scale indicates maximum
permissible engine RPM after the br eak-in pe­
riod. Before reaching this area, move these­
lector lever to position "D (Drive)" or ease
your foot off the acce lerator pedal.
(D Note
The tachometer needle should only briefly
be in the red zone: you could damage your
engine! The beg inning of the red zone var­
i es depending on the engine.
@ For the sake of the environment
Upshifting early saves fuel and reduces en­
gine noise.

12 Instruments and warning/indicator lights
Fuel gauge
The fuel gauge works only when the ignition is
on . When the needle reaches the red area, the
warning light in the instrument cluster will il­
luminate ¢
page 20 00']. Time to refuel!
(D Note
Never run the tank completely dry! An ir­
regular supply of fue l can cause eng ine
misfiring and fuel could enter into the ex ­
haust system. The catalytic converter
could then overheat and be damaged.
Speedometer with odometer
The speedometer shows you the vehicle
speed , and the odometer shows you how
many miles (kilometers) you have driven.
Fig. S Speedomete r close -up: odomete r display
The distance driven is shown in miles (USA
models) or in kilometers (Canada models).
lower odometer
The lower odometer shows the total number
of miles (kilometers) driven.
Upper odometer (trip odometer)
The upper odometer shows the tota l number
of mi les (kilometers) driven since you last re­
set the odometer back to zero . You can use
this odometer when you want to keep track of how many miles (kilometers) you have driven
for a single trip or errand. The last digit indi­
cates 1/10 of a mile (100 meters) . You can set
the trip odometer back to zero by pressing the
reset button
¢fig. 5.
With the ignition off, pushing of the Set/
Check button ¢
page 10, fig. 3@ can turn on
the display fie ld lighting for a few seconds.
Malfunction message
If there is a malfunction somewhere in the in­
strument cluster,
dEF w ill appear in the trip
odometer and will stay on . Contact your au­
thorized Audi dea ler to have the prob lem cor­
rected.
Immobilizer
When the ignition is sw itched on, the data on
the ignition key are scanned automat ica lly.
If an unauthor ized key was used,
SAFE is dis­
played continuously in the odometer display
field . The vehicle cannot be operated
¢ page 33.
Warning/indicator
Lights
Description
The indicator lights in the instrument cluster
blink or turn on. They indicate functions or
malfunctions ¢.& .
Messages may appear with some indicator
li ghts. The messages turn off after a sho rt
time. To display a message again, press the
Set/Check button¢
page 10, fig. 3@ . If
there is more than one malfunction, the indi­
cator lights will turn on one after the other for
approximately two seconds each.
Some indicators lights in the display can turn
on in severa l co lors.
A WARNING
- Failure to heed warning lights and other
important vehicle information may result
in ser ious personal injury or vehicle dam­
age.
- Whenever stalled or stopped for repair,
move the vehicle a safe distance
off the
road, stop the engi ne, and turn on the
emergency flasher¢
page 45.

18 Instruments and warning/indicator lights ABS/
{i§l) Anti-lock brake system
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL) .
The warning/indicator light & (USA mod­
els)
;tlJ (Canada models) will come on for a
few seconds when the ignition is switched on .
The l ight will go out after an automatic check
sequence is completed.
There is a malfunction in the ABS when:
-The warning/indicator light does not illumi­
nate when you switch the ign ition on .
- The warning/indicator light does not go out
after a few seconds .
- The warning/indicator light illuminates wh ile driving.
The ESC indicator light also illuminates if
there is a malfunction in the ABS . The mes­
sage
Stabilization program and ABS: fault!
See owner's manual
also appears in the in­
strument cluster display and a warning tone
sounds .
The brake system will still respond even
without the assistance of the ABS system.
See your authorized Audi dealer as soon as
possible to restore full braking performance.
For more informat ion regarding the ABS
¢ page 150.
Malfunction in the brake system
If the brake warning light¢ page 14 and the
ABS warning illuminate
together there may be
a malfunction in the ABS, and there may also
be a ma lfunction in the brake system itself
¢ ,&.. The ABS will not work and you will no­
tice a change in braking response and per­
formance.
In the event of a malfunction in the brake
system
t h e warn ing/ indicato r light 1111
(USA models) . (Canada models) in the in­
strument cluster flashes
9 page 14 .
Malfunction in the electronic differential
lock (EDL)
The EDL works together with the ABS. The
ABS warning light will come on if there is a malfunction in the
EDL system
¢page 150.
See your authorized Audi dealer as soon as
possible.
A WARNING
"---
- If the E (USA mode ls)l ii] (Canada
models) warning light does not go out,
or if it comes on whi le driving, the ABS
system is not work ing properly . The vehi­
cle can then be stopped only with the
standard brakes (without ABS). You w ill
not have the protection ABS provides.
Contact your Audi dea ler as soon as pos­
sible.
- USA models: If the 1111 warning ligh t,
the
J;.J warning light and the & warn­
ing light come on together, the rear
wheels could lock up first under hard
brak ing. Rear wheel lock-up can cause
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized Audi dealer or a quali­
fied workshop. Dr ive slow ly and avoid
sudden, hard brake applications.
- Canada models: If the brake warning
light ., the
DJ warning light and the
ABS warning light
[( Gi a come on together,
the rear wheels could lock up first under
hard braking. Rear wheel lock-up can
cause loss of vehicle contro l and an acci­
dent . Have your vehicle repaired immedi­
ately by your authorized Audi dealer or a
qualified workshop. Drive s lowly and
avoid sudden, hard brake applications.
{0) Worn brake pads
EtJ Check brake pads!
If the warning light i lluminates, immediate ly
contact your authori zed Audi dealer or quali­
fied workshop to have all brake pads inspect­
ed . On USA models the warn ing light
EtJ
comes on together with the warning light
1111. Both sets of brake pads on an ax le
must always be replaced at the same time.

Instrument s and warnin g/indic ator ligh ts 19
A WARNING ,~ ~
Driv ing with bad brakes can cause a coll i­
sion and serious personal injury .
- If the warning light
liJ and the warning
light
11111> w ith the message Brak e
pad s!
comes on in the instrument cluster
display, immediately contact your au­
tho rized Aud i dealer or qualified work­
shop to have a ll brake pads chec ked or
replaced if necessary.
EPC Electronic power control
This warning/indicator light monitors the
electronic power control.
The ~ warn ing/ indicator light (Electron ic
Power Control) illuminates when you switch
on the ignition as a function check .
(D Tips
If this warning/indicator light illuminates
while you are dr iving, then there is a mal­
function in the engine elect ron ics. Have
t he malfunction co rrected as soon as pos­
sible by you r autho rized Aud i dea ler o r
qualif ied workshop .
~ Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) is part
of the On-Board Diagnostic (OBD II) system.
The symbol
l\l lights up when the ignition is
turned on and will turn off after the engine
h as started and has settled at constant idle
speed . Th is ind icates that the MIL is working
properly .
The warning light illuminates when there is a
malfunct ion i n the engine electronic system.
Contact your author ized Audi dealer and have
the ma lfunction corrected.
An imp roperl y closed fuel filler cap ma y also
c au se th e MIL light to illum inat e
<:::>page 178.
For more informat ion c:::> page 30.
1) - : USA mod els only
!'1 Engine speed limitation
App lies to veh icles: w ith eng ine speed limitatio n
(II Do not exc eed max . engin e speed of
XXXX rpm
The Ill symbol illum inates when there is an
engine contro l ma lf u nction . The indicator
li ght ~ in the instrume nt cl uster a lso illumi­
na tes. The engi ne speed is l imited to the
speed displayed in the driver in format ion sys­
tem. Keep in mind that the engine speed wi ll
not exceed the val ue disp layed in the driver in­
format ion system, for example when down­
shifting.
P lease go to an au thorized A udi dealer or oth ­
er qualified wo rkshop to have the malfunctio n
repaired.
'.!2::. Checking the engine oil level
II Please add ma x. 1 qt of engine oil!
If the II symbo l comes on, add 1 quart ( 1 li­
ter) of oil at the next opportunity
<=>page 185.
~~. Engine oil sensor defective
If the II symbol illum inates, contact your
authorized Aud i dea ler and have the oil sensor
inspected .
0 Battery voltage low
(•) Low battery charge : battery will be
c harg ed whil e driving
If the indicator l ight turns on and the mes­
sage appears, there may be limited starting
ability.
If this message turns off afte r a little while,
the battery charged enough while d rivi ng .
If the message does not turn off, have yo ur
authorized Aud i dea ler or qualified workshop
correct the malfunction .

28 Driver information system
Service interval display
The service interval display reminds you when
your next service is due.
Fig. 19 Sect ion of instrument cluster: Serv ice inte rva l
d isplay
The schedule for the next oil change or inspec­
tion is calculated automatically and displayed
accordingly. The display works in two stages :
Service reminder
30 days before the next service is due, a serv­
ice reminder appears in the display when you
turn on the ignition.
After about
S seconds the display switches
back to normal. The distance and time re­
maining are updated each time the ignition is
turned on until the date due for service is reached .
Service due
When the due date for service is reached , the
message
Service due! appears in the instru­
ment cluster immediately after you turn on
the ignition. Additionally, a warning tone
sounds . After about
S seconds the display
switches back to normal.
Calling up the service schedules
If or when an oil change or inspection is due,
can be shown in the instrument cluster by se­
lecting the service interval display. Select
Check > Service > Oil change or Service by us­
ing the
! RESET I button and the rocker switch
c;, page25, fig.12.
Resetting the service interval display
Your authorized Audi dealer will reset the cor­
responding service schedule after performing the appropr
iate service on your vehicle. You
also have the possibility to reset the oil
change schedule after hav ing performed an
oil change according to Aud i specifications.
- Switch the ignition on.
- Pull the knob¢ fig. 19. The message.
Serv-
ice due!
appears.
- Pull the knob until the display
Oil change in
----- mi (km)·-- days
appears. If the I RESET I
button is not pulled within 5 seconds, the
disp lay reset mode closes.
(D Note
If yo u disconnect the battery terminals, no
ca lculations can be made for the service
interval display during this time and no
service reminder will appear. Remember
that observing the proper service intervals
is vitally important to extending the life of
your vehicle, particularly the engine, and maintaining its value . Even if the mileage
driven is low, the maximum period of one
year from one service to the next must not
be exceeded.
(D Tips
-Do not reset the display between oil
changes, otherwise the display will be in­
correct.
- The information in the Service Reminder
remains stored even when the vehicle
bat tery is disconnec ted.
Boost and engine oil
temperature indicator
Appl ies to vehicles: wit h boost pressure indicato r
0 ~ 00 0
j IX)
Fig. 20 D isplay : boost and engine oi l temperature indi·
a~r ~

30 Driver information system
Displaying intermediate time and pausing
timing
• To disp lay an intermediate time, press the
l ower section of the wiper switch @. The in­
termediate time appears in line
CD and is
marked with*.
• To pause timing, press the lower section of
the wiper switch @again.
• To continue timing, press the upper section
of the w iper switch @.
If t iming is paused, you can conti nue it later
even if you switch the ign it ion off.
Evaluating times and continuing or
resetting timing
Appl ies to vehicles: with lap timer
You can evaluate the fastest, slowest and
average lap times.
LAP 5
+ 45:12.9
59:08.B
flJ 51 :10.B
Fig. 23 Display: lap time evaluation
• To eva luate lap times, press and hold the
I RESET I ¢ page 29, fig. 21 @ button for ap­
proximately 2 seconds. The display shows
the fastest lap"+", the slowest lap"-" and
the average lap time "0".
• To continue t iming for addit ional laps, press
the wiper switch @.
• To reset th e timer to zero, press and hold
the
I RESET I button again for approximate ly
2 seconds.
• To switch the lap timer off completely,
press the
I RESET I button briefly.
@ Tips
-Saved lap times cannot be individually
deleted from the total results.
- The saved lap timer values will not be
l ost after turning the ignit ion off .
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) &ii in
the instrument cluster is part of the On-Board
Diagnostic (OBD II) system.
T he warning/indicator light ill uminates when
the ignition is switched on and goes out after
the engine starts and the id le has stabilized.
This indicates that the MIL is working proper­
ly.
If the light does not go out after the engine
is started, or illuminates while you are driv ­
ing, a malfunction may exist in the engine sys­
tem .
If the light illuminates, the catalytic con­
verter could be damaged .
Continue driving
with reduced power (avoid­
ing sustained high speeds and/or rapid accel­
erations) and have the condition corrected.
Contact your authorized Audi dealer.
If the light il luminates, the electronic speed
limiter may also be malfunctioning. For more
information¢
page 31, Electronic speed
limiter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
¢page 178.
On-Board Diagnostics
Fig. 24 Location of Data Link Con nector (O LC)
On-Boa rd Diagnostics monitors the compo ­
nents of your emission contro l system. Each
monitored component in your engine system
has been assigned a code. In case of a .,.

42 Clear vision
Clear vision Lights
Switching the headlights on and off
Fig . 39 Instr ument panel: l ight sw itch
Fig. 40 Instr ument pane l: ligh t switch w ith dayti me
running lights (DR L)
The light switch must not be overturned past
the stops in
either direct ion.
Switching on automatic headlight
control*
• Turn the light switch to AUTO* ¢ fig. 39.
Switching on the side marker lights
• Turn the light switch to :;oo:.
Switching on the headlights and high
beam
• Turn the light switch to tD .
• Push the high beam lever forward towards
the instrument panel¢
page 44.
Switching off the lights
• Turn the light switch to 0.
The head lights only work when the ignition is
switched on. While start ing the engine or
when switching off the ignition, the head- lights
will go off and only the side ma rker
lights will be on.
Daytime running lights (DRL) (USA
models)
T he daytime running lights can be turned on
or off using this function. If the function is ac­
tive, the daytime ru nning lights are turned on
automatica lly when the ign it ion is switched
on.
T he daytime running lights are activated
only
when the light switch is at the AUTO* or DRL *
position.
Daytime running lights (Canada models
only)
The daytime running lights are activated only
when the light switch ¢ fig. 39 is either at the
0 or the :;oo: pos ition.
T he daytime r unning lights funct ion cannot be
turned off.
Automatic headlight control*
In the switch position AUTO the automatic
headlight control
is turned on. The low
beams are turned on automatically through a
light sensor as soon as amb ient b rightness
(e .g. when driving into a tunnel) falls below a
value preset at the factory. When ambient
brightness increases aga in, the low beams are
turned off again automatically ¢.&..
In the
AUTO position the low beams are
switched off automatically when the ignition
is turned off .
Light Sensor Malfunction*
In the event of a light sensor malfunction, the
driver is notified in the instrument cluster dis­
play:
El Automatic headlights/automatic wipers
defective
For safe ty reasons the low beams are turned
on permanently with the switch in
AUTO* .
However , you can conti nue to turn the lights
on and off using the light switch. Have the
Ill>-