2013 AUDI TT fuel cap

Instrument s and warnin g/indic ator ligh ts 19
A WARNING ,~ ~
Driv ing with bad brakes can cause a coll i­
sion and serious personal injury .
- If the warning light
liJ and the warning
light
11111> w ith the message Brak e
pad s!
comes on in the instrument cluster
display, immediately contact your au­
tho rized Aud i dealer or qualified work­
shop to have a ll brake pads chec ked or
replaced if necessary.
EPC Electronic power control
This warning/indicator light monitors the
electronic power control.
The ~ warn ing/ indicator light (Electron ic
Power Control) illuminates when you switch
on the ignition as a function check .
(D Tips
If this warning/indicator light illuminates
while you are dr iving, then there is a mal­
function in the engine elect ron ics. Have
t he malfunction co rrected as soon as pos­
sible by you r autho rized Aud i dea ler o r
qualif ied workshop .
~ Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) is part
of the On-Board Diagnostic (OBD II) system.
The symbol
l\l lights up when the ignition is
turned on and will turn off after the engine
h as started and has settled at constant idle
speed . Th is ind icates that the MIL is working
properly .
The warning light illuminates when there is a
malfunct ion i n the engine electronic system.
Contact your author ized Audi dealer and have
the ma lfunction corrected.
An imp roperl y closed fuel filler cap ma y also
c au se th e MIL light to illum inat e
<:::>page 178.
For more informat ion c:::> page 30.
1) - : USA mod els only
!'1 Engine speed limitation
App lies to veh icles: w ith eng ine speed limitatio n
(II Do not exc eed max . engin e speed of
XXXX rpm
The Ill symbol illum inates when there is an
engine contro l ma lf u nction . The indicator
li ght ~ in the instrume nt cl uster a lso illumi­
na tes. The engi ne speed is l imited to the
speed displayed in the driver in format ion sys­
tem. Keep in mind that the engine speed wi ll
not exceed the val ue disp layed in the driver in­
format ion system, for example when down­
shifting.
P lease go to an au thorized A udi dealer or oth ­
er qualified wo rkshop to have the malfunctio n
repaired.
'.!2::. Checking the engine oil level
II Please add ma x. 1 qt of engine oil!
If the II symbo l comes on, add 1 quart ( 1 li­
ter) of oil at the next opportunity
<=>page 185.
~~. Engine oil sensor defective
If the II symbol illum inates, contact your
authorized Aud i dea ler and have the oil sensor
inspected .
0 Battery voltage low
(•) Low battery charge : battery will be
c harg ed whil e driving
If the indicator l ight turns on and the mes­
sage appears, there may be limited starting
ability.
If this message turns off afte r a little while,
the battery charged enough while d rivi ng .
If the message does not turn off, have yo ur
authorized Aud i dea ler or qualified workshop
correct the malfunction .

30 Driver information system
Displaying intermediate time and pausing
timing
• To disp lay an intermediate time, press the
l ower section of the wiper switch @. The in­
termediate time appears in line
CD and is
marked with*.
• To pause timing, press the lower section of
the wiper switch @again.
• To continue timing, press the upper section
of the w iper switch @.
If t iming is paused, you can conti nue it later
even if you switch the ign it ion off.
Evaluating times and continuing or
resetting timing
Appl ies to vehicles: with lap timer
You can evaluate the fastest, slowest and
average lap times.
LAP 5
+ 45:12.9
59:08.B
flJ 51 :10.B
Fig. 23 Display: lap time evaluation
• To eva luate lap times, press and hold the
I RESET I ¢ page 29, fig. 21 @ button for ap­
proximately 2 seconds. The display shows
the fastest lap"+", the slowest lap"-" and
the average lap time "0".
• To continue t iming for addit ional laps, press
the wiper switch @.
• To reset th e timer to zero, press and hold
the
I RESET I button again for approximate ly
2 seconds.
• To switch the lap timer off completely,
press the
I RESET I button briefly.
@ Tips
-Saved lap times cannot be individually
deleted from the total results.
- The saved lap timer values will not be
l ost after turning the ignit ion off .
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) &ii in
the instrument cluster is part of the On-Board
Diagnostic (OBD II) system.
T he warning/indicator light ill uminates when
the ignition is switched on and goes out after
the engine starts and the id le has stabilized.
This indicates that the MIL is working proper­
ly.
If the light does not go out after the engine
is started, or illuminates while you are driv ­
ing, a malfunction may exist in the engine sys­
tem .
If the light illuminates, the catalytic con­
verter could be damaged .
Continue driving
with reduced power (avoid­
ing sustained high speeds and/or rapid accel­
erations) and have the condition corrected.
Contact your authorized Audi dealer.
If the light il luminates, the electronic speed
limiter may also be malfunctioning. For more
information¢
page 31, Electronic speed
limiter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
¢page 178.
On-Board Diagnostics
Fig. 24 Location of Data Link Con nector (O LC)
On-Boa rd Diagnostics monitors the compo ­
nents of your emission contro l system. Each
monitored component in your engine system
has been assigned a code. In case of a .,.

malfunction, the component will be identified
and the fault stored as a code in the control module memory.
The MI L light may a lso illuminate if there is a
l eak in the on-board fue l vapor recovery sys­
tem . If the light illuminates after a refuelling,
stop the veh icle and make sure the fue l filler
cap is properly closed ¢
page 178.
In o rder to make an accurate diagnosis, the
stored data can only be displayed using spe­
cial diagnostic equipment (gener ic scan tool
for OBD).
I n o rder to connect the special diagnostic
equipment, push the plug into the Data Link
Connector (DLC) . The DLC is located to the
right of the hood release ¢
fig. 24.
Your authorized Audi dealer or a qualified
service station can interpret the code and per­
form the necessary repair .
A WARNING
Do not use the diagnostic connector for
personal use. Incorrect usage can cause
malfunctions, which can increase the risk
of a coll is ion!
Electronic speed limiter
-
Your veh icle may be factory equipped with
tires that are rated for a maximum speed of
130 mph (210 km/h) . T his is less than the
maximum speed o f yo ur vehicle. To reduce the
risk of s udden tire failure and loss o f control if
the vehicle is operated at excessive speeds,
your vehicle also has an electronic speed limit­
er. The electronic speed limiter prevents your
veh icle from going faster than the tire speed
rating. For more informat ion ¢
page 207 .
If the engine control unit rece ives fau lty vehi­
cle roadspeed signa ls, the Ma lfunction Indica­
tor Light (MIL)
(ii w ill illuminate. If this oc­
curs, contact the nearest author ized Audi
deale r for assistance .
Driver in formati on sys tem 3 1
S models
Your vehicle's top speed is elect ronically limit­
ed to 155 mph (250 km/h) .
If the engine control unit receives faulty veh i­
cle roadspeed signals, the Malfunction Ind ica­
tor Lamp (MIL)
¢"4 will illumina te . If this oc­
curs, contact the nearest authorized Audi
dealer for assistance.
RS model s
Your vehicle's top speed is electron ically limit ­
ed to 175 mph (280 km/h).
If the engine control unit receives faulty vehi ­
cle roadspeed signals, the Malfunction Ind ica­
tor Lamp (MIL)
¢"4 will illuminate . If this oc­
cu rs, contact the nearest authorized Audi
dealer for assistance.
A WARNING
-
A lways observe the posted speed lim its
and adjust your speed to suit prevailing road, traffic and weather conditions. Never
drive your vehicle faster than the maxi­
mum speed rating of the tires installed.

When should the roof rack be removed?
-Before going through an automatic car wash
(it is best to ask the car wash operator for
advice).
- When not in use, to reduce fuel consump­
tion, wind noise and to guard against theft.
_& WARNING
- Use of an unapproved roof rack or incor­
rect mounting of an approved roof rack
can cause the roof rack or the items at­
tached to it to fall off the roof onto the road .
- Objects falling from the roof of a vehicle
can cause a crash and personal injury .
- Only mount the system between the
markings shown in
¢ page 61, fig. 62.
- The roof rack system must be installed
exactly according to the instructions pro­
vided.
(D Note
- Your vehicle warranty does not cover any
damages to the vehicle caused by using
roof racks or mounting structures not
approved by Audi for your vehicle. The
same applies to damage resulting from
i ncorrect roof rack installation.
- Always check the roof rack mountings
and hardware before each trip and dur­
ing a trip to make sure everything is se­
curely tightened.
If necessary, retighten
the mount ings and check the entire sys­
tem from time to time.
- After mounting a roof rack system, or
whe n you transport objects on the roof
of your vehicle, the height of the vehicle
is naturally increased. Be careful when
driving under low br idges or in parking
garages for example. This could cause
damage to the load and even the vehicle
i tself .
Seats and storage 61
Mounting locations
The roof rack must be attached only at the
positioning bolts.
Fig. 62 Mounting locat ions for roof rac k
Installation
When installing the feet make sure that they
are pos itioned exact ly on the positioning bolts
provided @ between the side panel and the
upper roof frame ¢
fig. 62. The positioning
bolt is visib le as soon as the lip of the sealing
strip is pushed back from the roof frame with
the tool provided.
Loading the roof rack
Always distribute the loads evenly. Make sure anything on the roof rack is securely tied
down.
.,. Always distribute the loads on the roof rack
evenly.
.,. Always attach items to the roof rack secure-
ly before you drive off .
The maximum permissible roof weight is
165 lb (75 kg). The roof weight is made up of
the weight of the roof rack system and the
weight of the object being transported.
When using a roof rack system which has a
lower load carrying capacity, you must not use
up the total maximum permissible load carry­
ing capacity specified above. Instead, you
should load the roof rack system only to the maximum capacity spec ified by the manufac-
turer of the roof rack system . ..,.

-Blend must contain not more than 15%
MTBE.
Seasonally adjusted gasoline
Many gasoline grades are blended to perform
espec ially we ll for winter or summer driving.
During seasonal change-over, we suggest that
you fill up at busy gas stat ions where the sea­
sonal adjustment is more likely to be made in
time .
(D Note
-Methanol fuels which do not meet these
requirements may cause corrosion and
damage to plastic and rubber compo­
nents in the fuel system .
- Do not use fue ls that fail to meet the
specified criter ia in this chapter.
- If you are unable to determine whether
or not a particular fue l blend meets the
specifications, ask your service station or
its fuel supp lier.
- Do not use fuel for which the contents
cannot be identified.
- Fuel system damage and performance
problems resulting from the use of fuels
different from those specified are not
the responsibility of Audi and are not
covered under the New Vehicle or the Emission Control System Warranties.
- If you experience a loss of fuel economy
or driveability and performance prob­ l ems due to the use of one of these fuel
blends, we recommend that you switch
to unblended fuel.
Gasoline additives
A major concern among many auto manufac­
turers is carbon deposit build- up caused by
the type of gasoline you use.
Although gasoline grades differ from one manufacturer to another , they have certain
things in common. All gasoline grades contain
substances that can cause deposits to collect
on vital engine parts, such as fuel injectors
and intake valves. Although most gasoline brands include additives to keep engine and
Fuel supply and filling your fuel tank 177
fuel systems clean, they are not equally effec ­
tive .
A udi recommends using TOP TIER Detergent
Gasoline. For more info rmation on TOP TIER
Detergent Gasoline, please go to the official
website (www.toptiergas.com).
After an extended period of using inadeq uate
fuels, built-up carbon deposits can rob yo ur
engine of peak performance.
Q) Note
Damage or malf unct ion due to poor fue l
quality is not covered by the Aud i New Ve­
hicle Limited Warranty.
Fuel tank
Fuel filler neck
The fuel filler neck is located on the right rear
side panel behind the fuel fille r flap.
If the unlocking system should fail, you can
still open the flap manually -for detailed in ­
structions see
¢ page 179.
You can find the fuel tank capacity of your ve­ hicle in
Technical Data ¢ page 240.
The label on the inside of the fuel fi ller flap
tells you the correct fue l for your vehicle. For
more information about fuel specifications,
see
¢ page 176.
Your vehicle fue l tank has an on -board refue l­
li ng vapor recovery system. This feature helps
to prevent fuel vapors from escaping from the
tank and polluting the environment while you refuel your vehicle . In order to fill the tank
properly while protecting the environment,
please fo llow this refueling procedure careful­
ly.
_&. WARNING
Under normal operating conditions, never
carry additional fuel containers in your car.
Gas canisters and other containers used to
transport f uel can be dangero us. Such con­
tainers, full or empty, may leak and could
cause a fire in a collision. If you must
•
•

1 78 Fuel supply and filling your fuel t ank
transport fue l to use for your lawn mower,
snow blower, etc., be very careful and al­
ways observe local and state laws regard­
ing the use, transportat ion and storage of
such fuel containers . Make certain the con­
tainer meets industry standards (A NSI/
AS TM F852 -86) .
(D Note
Never drive your vehicle unti l the fuel tank
is completely d ry. The irreg ular s upply of
fuel can cause misfir ing. Gasoline cou ld
e nte r into the exhaust system and damage
t he cata lytic conve rter.
Refuelling
Fi g. 12 9 Drive r's doo r: Un lo cki ng fuel f ille r flap
Fi g. 130 Fu el cap hooke d on the opened fuel filler flap
When adding fue l, the ignition and any ce llu­
lar phones in the vehicle must be sw itched
off .
Tak ing the fuel cap off
• To open the fuel filler flap, pull the button
r:> fig. 129.
• Unscrew fuel filler cap counter-clockwise
and hang it o n the fuel filler flap ¢
fig. 130 .
Refuelling procedure
• Insert the f uel no zz le from the gasoline
pump into the fuel fi ller neck as far as it w ill
go .
• Select a med ium refuelling rate so that the
no zz le sw itches off automatically when the
tank i s full.
Putting the fuel cap back on
• After fi lling your tank, twist the fuel filler
cap clockw ise until you hear a definite click.
• Close the fue l filler flap.
T o avoid fuel s pill ing or evaporating from the
fuel tank always close fuel filler cap properly and completely . An improperly closed fuel fi ll­
er cap may also cause the MIL lamp¢
page 30
to come on.
A WARNING
Imp roper refue ling or handling of fuel can
cause fire, explosion and severe burns.
- Fue l is highly flammable and can cause
severe burns and other injur ies .
- Fai lure to shut the engine off while refu­
eling and/or to insert the pump nozzle
fu lly into the fuel filter neck could cause
fuel to spray out of filler neck or to ove r­
f low. Fuel spray and overflowing fuel can
cause a fire.
- Never use a ce llu lar telephone whil e re­
fue ling . Th e e lec tromagnet ic radiat io n
can cause spa rks th at can igni te fuel v a­
pors an d cause a fire.
- N ever get back in to your vehicle whi le re­
fue ling.
If in excep tio nal cir cumstances
you must get back in your vehi cle while
ref ueling, make ce rtain that you close
the door and touch metal to discharge
static electricity be fore touching the fill­
er nozzle again . Static e lectr icity can
cause sparks that can ignite fuel vapors
re leased d uring refueling .
- Never smoke or have an open f lame any­
where in or near your ve hicle when refu­
eling or fi lling a portable fue l conta iner .

-Apply the parking brake.
- Move selector lever of automatic trans-
mission to "P" (Park); put manual trans­
mission in Neutral.
- Always let the engine cool down . Hot
components will burn skin on contact.
- To reduce the risk of being burned, never
open the hood if you see or hear steam
or coolant escaping from the engine
compartment . Wait until no steam or
coolant can be seen or heard before care­
fully opening the hood.
- Keep children away from the engine com­
partment .
- Never spill fluids on hot engine compo­
nents. They can cause a fire.
- Never touch the radiator fan. The auxili­
ary electric fan is temperature controlled
and can switch on suddenly.
- Never open the coolant reservoir cap
when the engine is still warm. The cool­
ant system is pressurized and hot cool­ ant could spray out .
-Protect your face, hands and arm from
steam or hot engine coolant by placing a
thick rag over the cap when you open the
coolant reservoir .
- Do not remove the engine cover under
any circumstances. This increases the
risk of burns.
- If work on the fuel system or the electri­
cal system is necessary:
- Always disconnect the battery.
- Never smoke or work near heaters or
open flames. Fluids in the engine com­
partment could start a fire.
- Keep an approved fire extinguisher im­
mediately available.
- To avoid electrical shock and personal in­
jury while the engine is running or being
started, never touch:
- Ignition cables
- Other components of the high voltage
electronic ignition system.
-If you must perform a check or repair
with the engine running:
Checking and filling 181
- First, fully apply the parking brake,
move selector lever of automatic trans­
mission to "P" (Park); put manual
transmission in Neutral.
- Always use extreme caution to prevent
clothing, jewelry, or long hair from get­
ting caught in the radiator fan, V -belts
or other moving parts, or from contact­ ing hot parts. Tie back hair before
starting, and wear no clothing that will hang or droop into the engine.
- Minimize exposure to emission and
chemical hazards~,& .
.8, WARNING
California Proposition 65 Warning:
- Engine exhaust, some of its constituents,
and certain vehicle components contain
or emit chemicals known to the State of
California to cause cancer and birth de­
fects and reproductive harm. In addition,
certain fluids contained in vehicles and
certain products of component wear con­
tain or emit chemicals known to the
State of California to cause cancer and
birth defects or other reproductive harm.
- Battery posts, terminals and related ac­
cessories contain lead and lead com­
pounds, chemicals known to the State of
California to cause cancer and reproduc­
tive harms. Wash hands after handling.
(D Note
When adding fluids, always make sure that
they are poured into the proper container
or filler opening, otherwise serious dam­
age to vehicle systems w ill occur.
@ For the sake of the environment
To detect leaks in time, inspect the vehicle
floor pan from underneath regularly. If
you see spots from oil or other veh icle flu­
id s, have your vehicle inspected by an au­
thorized Audi dealer . •
•

-Never mount used tires on yo ur vehicle if
yo u are not sure of their "previous histo­
ry." Old used tires may have been dam­
aged even though the damage cannot be
seen that can lead to sudden tire failure
and loss of vehicle control.
- If you notice unusual vibration or if the
vehicle pulls to one side when d riving, al­
ways stop as soon as it is safe to do so
and check the wheels and tires for dam­
age .
(D Note
Please note that summe r and wi nte r tires
are designed for the cond itions that are
Glossary of tire and loading terminology
Accessory weight
means the comb ined weight (in excess of
those sta ndard items which may be rep laced)
of au toma tic transmission, power steer ing ,
power brakes, power windows, power seats,
radio, and heater, to the extent that these
items are availab le as factory-installed equip­
ment (whether installed or not) .
Aspect ratio
means the rat io o f the height to the w idth of
the tire in percent . Numbers of 55 or lower in ­
dicate a low sidewall for improved steering re­
sponse and better overa ll handling on dry
pavement .
Bead
means the part of the t ire t hat is made o f
steel wires, wrapped or reinforced by ply cords
and that is shaped to fit the r im.
Bead separation
means a b reakdown of the bond between
components in the bead .
Cord
means the strands forming the plies in the
tire.
Tire s an d wheel s 197
typica l in those seasons . Aud i recommends
using winter tires during the winter
months . Low temperatures signif icant ly
dec rease the e lasticity of summer t ires,
which affects tract ion and brak ing ability.
If summer t ires are used i n very co ld tem ­
peratures, cracks ca n form o n the tread
bars , res ulting in perma nen t tire damage
that can cause loud driving noise and un­
bala nced ti re s. Audi i s not respon sible for
th is type of damage .
Cold tire inflation pressure
means the tire p ress ure recommended by t he
vehicle manufacture r fo r a tire o f a des ignated
s ize t hat has not bee n driven for more than a
coup le o f miles (k ilometers) at low speeds in
the three hour period before the tire press ure
is m easured or adjusted.
Curb weight
me ans the we ight of a motor ve hicle with
st andard equipmen t incl ud ing the max imum
capacity of fuel, oi l, and coolant, air condi ­
tioning and additional weig ht of optiona l
equipment.
Extra load tire
means a t ire designed to operate a t higher
loads and at higher inflat ion p ress ures than
the corresponding standar d tire. Extra load
ti res may be ident ified as "XL", "xl", "EXTRA
LOAD", or "RF" on the sidewall.
Gross Axle Weight Rating ("GAWR")
me ans the lo ad-ca rry ing capa city of a si ngle
axle system, measured a t the tire -ground in­
te rfaces.
Gross Vehicle Weight Rating ("GVWR ")
mea ns the maximum total loaded we ight of
the ve hicl e. .,.. •
•