2013 AUDI S7 ECO mode

CD
@
®
©
®
®
(j)
Door handle
Audi side assist display
Power locking sw itches
Memory function buttons .. .. .
Aud i side assist button ...... .
A ir vents with thumbwheel
Control lever for:
- T urn signal and high beam
- Audi act ive lane assist . .. .. .
@ Mu ltifunction steering wheel
with:
- Horn
- Driver's airbag
- Driver information system but-
tons ... ..... ....... ... .. .
- Audio/video , telephone, navi­
gation and voice recognition
buttons
- Steering wheel heating . ... .
- Shift padd les (automatic
transmission) ..... ... ... . .
® Instrument cluster ......... .
@ Head-up Display ........... .
@ Windshield washer system
lever ..................... .
@ Buttons for:
- MMI display
- Reset bu tton for tr ip odome-
te r .. .. ... .. ..... ... .. .. .
@ Starting the engine if there is a
malfunction ............... .
~ Knee airbag ........... .. .. .
@ Steer ing whee l adjustment, de­
pending on equipment:
- mechan ical .......... .. .. .
- electrical .... .. ..... ... .. .
@ Leve r for:
- Cru ise control system ... .. .
- Adaptive cruise contro l .. .. .
@ Button for sw itch ing the Head­
up Disp lay on/off, adjusting the
h eight .. ............. .. .. .
@ Instrument illumination ... .. .
@ Eng ine hood release ........ . 98
37
56
98
45 95
153 23
73
113 11
29
47
2 7
78
166
74
74
83
86
29
46
230
In strument s and control s 9
@ Data Link Connector for On
Board Diagnostics (OBD II)
@ Light switch ... .. . .. .... ... .
@ Buttons for :
- All-weather lights
- Night vision assistant .... .. .
- Rear fog lights .. .. .. ..... .
@ Power exterior m irror adjust-
ment ...... .. .. ..... ..... . 29
43
43
105 43
49
@ Rea r lid switch . . . . . . . . . . . . . . 38
@ Power w indows . . . . . . . . . . . . . 40
@ MMI display
@ Emergency flashe rs . . . . . . . . . . 44
@ Glove compartment . . . . . . . . . 60
@) Front passenger's airbag . . . . . 153
@ Valet parking feature . . . . . . . . 41
@ Drives (MMI)
@ Buttons/Indicator lights fo r
- Start-Stop-System . . . . . . . . . 80
- Parking system . . . . . . . . . . . . 116
- PASSENG ER AIR BAG OF F . . . . 162
- Rear spoiler . . . . . . . . . . . . . . . 198
- Electron ic Stabilization Con-
t rol . . . . . . . . . . . . . . . . . . . . . 198
@ Climate controls, depending on
vehicle equipment:
- Three-zone cl imate control . . 69
- F our-zone automatic climate
cont rol . . . . . . . . . . . . . . . . . . 71
@ Storage compartment or ash-
t ray wit h cigarette lighter . . . . . S8, 58
@ I S T ART ENGINE STOPI button 75
@ MM I controls
@ 12-volt socket, (upho lder 58, 59
@ E lectromechanical parking
brake . . . . . . . . . . . . . . . . . . . . . 78
@ Selector lever (a utomatic trans-
mission) 109
(D Tips
-Some of the equipment or fea tures
show n in the genera l ill ustration may be
standard equipment on your vehicle or
may be opt ional eq uipment depending
on your model. Always ask your
ll>

16 Instrum ent s and w arn ing /indic ato r light s
&_ WARNING
-Always observe the warnings in
i=> page 224, Engine compartment, be­
fore opening the hood and checking the brake flu id.
- Driv ing with low brake fluid is a safety
hazard. Stop the car and get professional
assistance.
- USA models: If the 1111 warn ing light,
the
G1 warning light and the m:11 warn­
ing light come on together, the rea r
wheels co uld lock up first unde r hard
braking . Rear wheel lock-up can cause
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized Aud i dea ler or a quali­
fied workshop. Drive slowly and avoid
sudden, hard brake applications.
- Canada models: If the brake warn ing
light ., the
DJ warn ing light and the
ABS warning light
ii] come on together,
the rear wheels could lock up first unde r
hard bra king. Rear wheel lock-up can
cause loss of vehicle co ntrol and an acci­
dent. Have yo ur vehicle repaired immed i­
a tely by your authori zed A udi dealer or a
qualified workshop . Dr ive slowly and
avoid sudden, hard brake applicat ions.
- If the brake warning/indicator ligh t does
not go out afte r a few secon ds an d the
parking brake is released, or lights up
whi le you are driving, the fluid level in
the brake fluid reservoir is too low. If you believe that it is safe to do so, proceed
immediately at low speed to the nearest
authorized Audi dealer o r qualified repair
facility and have the brake system in­
s pected.
- Always kee p in m ind that afte r several
brake applicat ions, yo u will need g reater
pressure on the b rake peda l to s top your
vehicle. Do no t re ly on stra ined brakes to
respond with maxim um stopping power
in critical situations . You must allow for
increased brak ing distances. The extra
distance used up by fad ing brakes could
lead to an acc ident.
PARK/( ®) Electromechanical parking
brake
The warning/indicator light monitors the
electromechanical parking brake .
If the indicato r light - (USA models)/ .
(Canada mode ls) turns on, the pa rking brake
was set. If the pa rking brake is set when the
igni tion is off, the indicator light turns off a f­
te r abo ut 20 seconds .
The wa rning/i nd icator lig ht wi ll go out when
the pa rking bra ke is re leased.
- (USA models ) /. (Canada mod els)
Caution: Vehicle park ed too steep
If the indicator light b links and the message
appea rs, there is not enough braki ng power to
keep the vehicle from roll ing . The brakes have
overheated . The veh icle cou ld roll away eve n
on a sma ll incline .
Press brake pedal to release parking brake
To release the parking b rake, press the brake
peda l and press the button~ or start driving
with starting assist at the same time
i=> page 79.
Plea se relea se parking brake
T o re lease the p arki ng brake manually, p re ss
t h e brake peda l and press the button ~ at the
same time. The parki ng b rake only releases
automatica lly if the driver's safety belt is fas ­
tened .
Iii Parking brake!
If the Iii indicator lig ht tur ns on and th is
message appears, the re is a parki ng b rake
m alfunction . D rive to your au thori zed A udi
dealer or qualified workshop immediately to
have t he malfunction corrected .
-L Engine cooling system malfunction
A malfunction in the engine cooling system
must be repaired as soon as possible.
• Switch off engin e and check coolant level ..,.

Instruments and warning/indicator lights 19
If the indicator light turns on and the mes ­
sage appears , there is a ma lfunction in the en­
g ine start system.
Drive to your authorized Aud i dea ler immedi­
ately to have the mal function cor rected .
0 Air suspension
Appl ies to vehicles: with a ir suspe nsio n
• Air suspension: system fault. Can contin­
ue slowly with ma x. 35 mph .
There is a malfunction that can resu lt in re­
stricted driving stability .
Carefully drive at a maximum speed of 35
mph
(60 km/h) to your authorized Audi dealer
or qualified workshop to have the malfunction
corrected .
• Air suspension: service mode. Vehicle
can only be moved with restrictions
Carefully drive to your authorized Aud i dealer
or qualified workshop immediately to have
the service mode deactivated.
l!I Air suspension fault
There is a system ma lfunction that can result
in restr icted driving stability or reduced
ground clearance.
Drive to your authorized Audi dea ler immedi­
ately to have the malfunction corrected.
l!I Air suspension: vehicle too low. Ground
clearance reduced
The ground clearance is very low due to a sys ­
tem malf unct io n. Wait until the air suspen­
sion system has restored normal gro und clear­
ance . Otherwise, conditions such as an uneven
road surface can lead to vehicle damage.
~/ !f Safety systems
The fl (USA models) !fll (Canada models) in­
dicator light monitors the safety systems (e .g.
a ir bags, pretensioners) and illuminates for a
few seconds each time you switch the ignition
on . If the
fl (USA models)
Jfll (Canada models)
indicator light does not go out, or if it illumi­
nates while you are driving, or if it starts to
blink, then there is a malfunction somewhere
in the system. If the light does not illuminate
when you switch the ign ition on, th is also
mea ns there is a malfunct io n.
A WARNING
If you have a ma lfunction in the safety sys­
tems, contact your authorized Audi dealer immediately. Otherwise the safety sys­
tems may not work properly in an acc i­
dent.
f!;.J fj Electronic Stabilization Control
(ESC)
This warning/indicator light monitors the
Electronic Stabilization Control .
When you switch the ignition on, the indicato r
light
G1 turns on briefly to check the function.
If the
G1 indicator lamp blinks while dr iv ing,
the ESC or ASR (Anti-Slip Reg ulation) is active­
ly reg ulat ing.
If the
Ji1 indicator lamp illuminates, the sys­
tem has switched the ESC
off.
If the indicator light II turns on, the ESC was
switched to ESC sport mode with the button
[!]~page 196. If this is case , you can reacti­
vate the ESC by switching the ignition
off and
then on again. The warning/ indicator light
sho uld go out to show that the system is fully
functional again.
Stabilization control (ESC/ABS): Fault! See
owner's manual
If the indicato r light GI and the ABS indicator
li ght
B (USA models) ,1iJ (Canada mod­
els) tu rn on and the message appears, there is
a malfunction in the ABS system or electron ic
differential lock. This also inte rr upt s the ESC.
The brakes still function with their norma l
power, but ABS is not active .
Drive to your authorized Audi dealer immedi-
ate ly to have the malfunction corrected. .,..

20 Instruments and warning/indicator lights
If the battery te rm inals were disconnected
and re-connected, the vehicle was j ump sta rt­
ed or the batte ry is very weak, the ESC sensor
system goes through a learning process for
the first few yards. The warning/ind icator
light illuminates . The war ning/ indicato r light
goes out as soon as the learning proc ess is
comp lete .
For more informat io n about t he ESC
¢ page 196.
ABS/( @) Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differ ential lock (EDL).
The warning/indicator light E (USA mod­
e ls)
;£1 (Canada mode ls) will come on fo r a
few seconds when the ignition is switched on.
The light will go out after an a utomat ic chec k
se quence is completed .
There is a malfunction in the ABS when :
-The warning/ indicator lig ht d oes not ill umi ­
nate whe n you switch the ign ition on.
- The wa rning/i ndicator lig ht does not go out
after a few seconds .
- The warning/indicator lig ht illumi nates
wh ile driving.
T he ESC ind ic a tor light a lso ill umin ates if
the re is a mal func tion in the A BS. T he mes ­
sage
Stabilization control (ESC/ABS ): Fault!
See owner's manual
a lso appears in the in ­
strument cluster disp lay and a warning tone
s o unds .
The brake system will still respond even
without the assistance of the ABS system .
See your authorized Audi dealer as soon as possible to restore full braking performance.
For more informat io n regarding the ABS
¢ page 196.
Malfunction in the brake system
If the brake wa rn ing light ¢ page 15 and the
ABS warning ill uminate
together there may be
a ma lfunction in the ABS, and there may also
be a ma lf u nct ion in the brake system itself
c::> /1. . The ABS will not work and you will no- tice a change in braking respon
se and per­
formance .
In the even t of a malfunction in the brake
system
t he warning/ind ic at or ligh t 11111
(U SA mode ls)/ . (Canada models) in the in ­
str ument cl uster flas hes
c::> page 15 .
Malfunction in the electronic differential
lock (EDL)
The E DL works toge ther w it h the AB S. T he
ABS wa rnin g light wi ll come on if there is a
malfu nction in t he EDL system
c::> page 196.
See your author ized Audi dealer as soon as
poss ib le .
A WARNING
-- If the E (USA mode ls)/ rl] (Canada
mo dels) warning light does not go ou t,
or if i t com es on whi le driving, t he ABS
s y st em is not wor king pr ope rly. The vehi ­
cle can the n be st opped only wit h the
s ta nda rd b ra kes (withou t A BS) . Yo u w ill
not have the protect ion A BS provides .
Contact your Audi dea le r as soon as pos­
sible.
- USA models: If t he 11111 warning light,
the
J_j) wa rnin g light and t he E warn­
ing light come on together, the rear
wheels could lock up f irst under hard
b rak ing. Rear wheel lock-up can ca use
loss of vehicl e co ntrol and an accident.
Hav e your ve hicle repair ed imm ediat ely
by y our authori zed A udi deale r or a quali­
fi ed work sh op. Dr ive slo wly and avoid
sud de n, hard bra ke applicat ions.
-Canada models: If the br ake w arn ing
ligh t. , the
G1 wa rning light a nd th e
A BS warning ligh t
SJ come on together,
the rear wheels could lock up first under
ha rd br aking. Rea r whee l loc k-u p can
cause loss of vehicle con tro l an d an acci­
dent. Have your veh icle repa ired immedi ­
ately by your authorized Audi dealer or a
qualified works hop. Drive s lowly a nd
avoid sudde n, hard b ra ke app lications.
-

26 Instruments and warning/indicator lights
The current fuel consumption can be dis­
p layed using a bar ¢
fig. 10. The average con­
sumpt ion (mpg) stored in the short-term
memory is also displayed. Electrical energy
can be stored in the battery when the vehicle is coasting or driving downhill (recuperation) .
The bar w ill move toward Cl.
Efficiency program
The efficiency program can help you to use
less fuel. It evaluates driving information in
reference to fuel consumption and shows oth­
er equipment influencing consumption as well
as shift recommendations. ¢
page 26. Fuel
economy messages ¢
page 26 provide tips
for eff icient driving . The efficiency program
uses distance and consumption data from tr ip
computer
1.
To display the efficiency program, call up Ve­
hicl e functions and select the menu option
Efficiency program . If the data a re deleted in
the efficiency program, those values are also
reset in tr ip computer.
(D} Tips
- All stored values w ill be lost if the veh i­
cle battery is disconnected.
- Fuel consumpt ions (average and cur­
rent), range and speed are displayed in
metric units on Canadian models.
Other equipment
Fig. 8 Tri p comp uter: other equ ipment
Requirement : The eff iciency program must be
displayed
~ page 26 .
.,. Turn the thumbwheel until the other equip ­
ment appears in the display . Other equipment that is currently affecting
fuel consumption is listed in the efficiency
program. The display shows up to three other
items of equ ipment @. The equ ipment using
the most fuel is listed first . If more than three
items using fuel are switched on, the equip ­
ment that is currently using the most fuel is
displayed .
A scale @also shows the current total con­
sumption of all other equipment .
Fuel economy messages
Fig. 9 Display : example o f a fuel econo my m essa ge
Fuel economy messages are displayed when
fuel consumption is increased by certain con­
ditions. If you follow these fuel economy mes­
sages, you can reduce your veh icle's consump­
tion of fuel. The messages appear automat i­
cally and are only displayed in the efficiency
program. The fuel economy messages turn off
automat ically after a certain per iod of t ime .
.,. To turn an economy message off immed i-
ately after it appears, press any button on
the mult ifunction steering wheel.
@ Tips
- Once you have turned a fuel economy
message off, it will only appear again af­
ter you turn the ign ition on again .
- The fuel economy messages are not dis­
played in every instance, but rather in in­
tervals over a period of time.

Instrument s and warning /indicator lights 2 7
Cylinder on demand System
Applies to vehicles: with 4.0 TFS! engine
Fig . 10 Instr ume nt cluste r: fuel cons umptio n
To save f uel, the eng ine automat ica lly t urns
f our cylinders on or off, depending on the
amount of power needed . This action is not
felt by the passengers .
Displaying cylinder mode
Requirement: the on-board computer is dis­
p layed
c:;, page 25.
~ Turn the thumbwhee l until the curren t fue l
co nsumption display is shown in the instru­
ment cluster.
If the green bar is d isp layed,
you are driving in 4-cylinder mode .
Basic requirements for 4 -cylinder mode
4 -cy linder drive mode is used automatically if
certain basic requirements are fu lfi lled . These
include :
- A low power o utp ut requi reme nt.
- D riving i n third gea r o r higher.
- E ngine speed between 960 and 3,500 RPM .
- A warm engine.
Odometer
Fig. 11 I n s tr um en t cluster : O dome te r an d rese t but­
t o n
T he odometer shows you how m any m iles
( kil omete rs) you have drive n. You can switch
the d isplay from miles to ki lometers and v ice
versa via t he M MI.
Upper odometer
The trip odomete r shows the dis tance driven
s ince it was last reset. It can be used to meas ­
u re short dista nces . The last digit indicates
1/10 of a mile (100 meters).
You can re set t he trip odometer to zero by
pressing the Reset bu tton
Efil .
Lower odometer
The lower odomet er shows the tota l numb er
of m iles (kilometers) dr iven.
Malfunction message
If there is a malfunc tio n i n the instrument
cluster,
DEF will appear in the trip odometer
display area . Conta ct your author ized Audi
dealer to have th e problem correct ed .
Time and date display
Fig. 12 Inst rumen t clus te r: cl ock and date
You can set the t ime and the date disp lay in
the MMI. Refer to the MMI owne r's man ual
for ins truc tio ns.
When you open the dr iver's door, the date and
time appear in the instrument cluster display
fo r 30 seconds.

30 Instruments and warning/indicator lights
the engine starts and the idle has stabilized.
This indicates that the MIL is working proper­
ly.
If the light does not go out after the engine
i s started, or illuminates whi le you are driv­
ing, a ma lfunction may exist in the engine sys­
tem .
If the light illuminates, the catalytic con­
verter could be damaged.
Continue driving
with reduced power (avoid­
ing susta ined high speeds and/or rapid accel­
erat ions) and have the condition corrected.
Contact your authori zed Audi dealer .
If the light illuminates, the electronic speed
limiter may also be ma lfunctioning. For more
information
Q page 30, Electronic speed
limiter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
Qpage227.
On-Board Diagnostics
Fig . 16 Locat io n of Data Link Co nnector (D LC)
On-Board Diagnostics monitors the compo­
nents o f your emission control system. Each
monitored component in your engine system
has been assigned a code. In case of a mal­
function, the component will be identified
and the fault stored as a code in the control module memory.
The MIL light may a lso illuminate if there is a
leak in the on-board fue l vapor recovery sys­
tem. If the light illuminates after a refuelling,
stop the veh icle and make sure the fuel filler
cap is properly closed
Q page 22 7. In order to make an accurate diagnosis, the
stored data can on
ly be displayed using spe­
c ial diagnostic equipment (generic scan tool
for OBD).
In order to connect the special diagnostic
equipment, push the plug into the Data Link
Connector (D LC). The DLC is located to the
right of the hood release~
fig. 16.
Your authorized Audi dea ler or a qualified
service station can interpret the code and per­
form the necessary repair.
A WARNING
-Do not use the diagnostic connector for
personal use. Incorrect usage can cause
malfunctions, which can increase the risk
of a collision!
Electronic speed limiter
-
Your vehicle may be factory equipped w ith
t ir es that are rated for a maximum speed of
130 mph (210 km/h). This is less than the
maximum speed of your vehicle. To reduce the
risk of sudden tire fai lure and loss of control if
the vehicle is operated at excessive speeds,
your vehicle also has an e lectronic speed limit­
er . The electronic speed limiter prevents your
vehicle from going faster than the tire speed
rating . For more information
Q page 257.
If the engine control unit receives faulty vehi­
cle road speed signals, the Malfunction Indi­
cator Lamp (MIL)
¢fj will illuminate . If this
occurs, contact the nearest authorized Audi
dealer for assistance.
S models
Your vehicle's top speed is electronica lly limit­
ed to 155 mph (250 km/h).
If the engine control unit receives faulty vehi­
cle roadspeed signals, the Malfunction Indica­
tor Lamp (MIU¢.§ will illuminate . If this oc­
curs, contact the nearest authorized Audi
dealer for assistance.

@ Tips
The instrument illumination (for dials and
needles) lights on when the ign it ion is
sw itched on and the vehicle lig hts are
turned off. As the daylight fades, the ill u­
m ination of the dials likewise dims auto ­
mat ically and w ill go out comp lete ly when
the o utside lig ht is ve ry low . This fea ture is
meant to remi nd you t o swit ch on the
headl igh ts when o utside light condi tions
become poor.
Vision
Sun visors
( J
F ig . 39 Sun v isor
The sun visors for the driver and passenger
can b e released from their brackets and
turned tow ard the doors ¢
fig. 39@.
The mirror light switches on when the cover
over the vanity mirror @opens.
Sun shade
Applies to vehicles: with sun shade
The sun shade is located on the luggage com ­
partment shelf.
a a
F ig . 40 Sun s hade i n lowe red pos it io n
Clear vi sion 4 7
When the sun shade is in the lowered posi ­
tion, it is secured in t he retainer @.
1-To raise @the s un shade , remove it from
t he re tainer.
_& WARNING ..
Do not use t he sun shade to secure cargo .
The luggage compartment cove r is not a
surface for storing objects . Objects p laced
on the cover could endanger all ve hicle oc­
cupants dur ing sudden braking maneuvers
or i n a c rash .
Wiper and washer
system
Switching the windshield wipers on
Fi g. 4 1 Windshi eld wipe r leve r
Move the windshie ld w iper lever to the corre­
sponding position:
@ -Windshield wipe rs off
@ -Rain senso r mode . The windsh ield wipers
switch on once the veh icle speed exceeds ap ­
proximate ly 2 mph (4 km/h) and it is ra ining .
T he hig her the rain senso r sens it ivity is set
(sw itch @to th e r ight) , the earlier the wind­
shield wipers react to mois ture on the w ind­
shield. Yo u can deactivate rain sensor mode in
the MMI, which will then activate interm ittent
mode. Se lect: ICAR ifunct ion button>
(Car )*
systems
contro l button > Driver assist > Rain
sensor > Off .
In interm ittent mode, yo u can
adjust the interval time using the switch @.
@ -Slow w ip ing
@ -Fast wip ing