260 Emergency situations
fall from a lift if there is a change in ve
hicle weight distribution and balance.
This might happen, for example, when
heavy components such as the engine
block or transmission are removed .
- When removing heavy components like
these, anchor vehicle to hoist or add cor
responding weights to maintain the cen
ter of gravity. Otherwise, the vehicle
might tilt or slip off the hoist, causing
serious personal injury.
(D Note
- Be aware of the following points before
lifting the vehicle:
-The vehicle should never be lifted or
jacked up from underneath the engine
oil pan, the transmission housing, the
front or rear axle or the body side
members. This could lead to serious
damage.
- To avoid damage to the underbody or
chassis frame, a rubber pad must be
inserted between the floor jack and
the lift points.
- Before driving over a workshop hoist,
check that the vehicle weight does not
exceed the permissible lifting capacity
of the hoist.
- Before driving over a workshop hoist,
ensure that there is sufficient clear
ance between the hoist and low parts
of the vehicle.
Data
450 hp, 4.2Liter 8-cyl. engine
Engine data
Maximum output SAE net
Maximum torque SAE net
No. of cylinders
Displacement
Stroke
Bore
Compression ratio hp@rpm
lb-ft@rpm
C[D (cm
3
)
in (mm)
in (mm) 450 @8250
316 @4000-6000
8
254 (4163)
3.65 (92.8)
3 .36 (84.5)
12.5: 1
Data
Fuel Premium unleaded Recommended for maximum
engine performance. Further details
¢page 202,
Gasoline
Dimensions (approx.)
Length (with licence plate bracket)
Width (with outside mirrors folded) Height (unloaded)
Turning circle diameter (curb to curb)
Capacities (appro x.)
Fuel tank
- Total capacity
-Reserve (of total capacity) in (mm)
in (mm)
in (mm)
ft (m)
Windshield and headlight* washer fluid container
Engine oil
with filter change 183.0
(4649)
73.2 (1860)
54.3 (1380)
37.4 (11.4)
gal (liters) 16.1 (61.0)
gal (liters) 1.8-2.4
(7-9)
quarts (liters) 4.8 (4.5)
quarts (liters) 10.2 (9.7)
263
•
•
