2013 AUDI A8 spare wheel

274 What do I do now ?
-Always store the vehicle tool kit, the jack
and the replaced t ire in the luggage com­
partment ¢
page 140.
@ Tips
Before changing the wheel, yo u m ust acti­
vate t he jac king mode, so t hat the auto­
mat ic cont rols fo r the Adaptive Air S us­
pens io n do not make it mo re diff ic u lt to
lift the vehicle with the jack
c.';> page 2 76 .
Changing a wheel
When you change a wheel, follow these­
quence described below step-by-step and in
exactly that order .
1. Activate the vehicle jack mode
¢page 276.
2. Remove the decorative wheel cover* . For
more deta ils see also
¢ page 274, Deco­
rative wh eel covers
o r ¢ page 275 ,
Wheels with wheel bolt caps.
3 . Loosen the wheel bolts¢ page 275.
4. Locate the proper mo unt ing po in t for the
j ack and align t he jack be low tha t poi nt
¢ page 276 .
5. Raise the car with the jack¢ page 276.
6. Remove the wheel with the flat tire and
then install
the spare ¢ page 2 77.
7. Tighten all wheel bo lts light ly .
8 .
Low er th e ve hicle w ith the jack .
9 . Use t he wh eel bolt wren ch a nd
firmly
tig hte n all whee l bolts c.';> page 2 75.
1 0 . Repl ace t he decor ative wheel cover* .
11. Deactivate t he ve hicle jack mode in the
M MI:
!CARI fu nction button > Car systems
control b utton > Servicing & checks > Air
susp.: jack mode
> Off .
The vehicle jack mode sw itches off automati­
cally at speeds above 10 km/h .
A WARNING
Always read and follow all WAR NINGS and
information
¢ .&. in Raising the vehicle on
page 2
76 a n d ¢ page 2 78.
After changing a wheel
A wheel change is not complete without the
doing the following .
.,. Always store the vehicle tool kit, the jack*
and the rep laced tire in the luggage com­
pa rtment
¢ page 140.
... Check the tir e pr essure on the spa re whee l
immed iate ly afte r mounting i t.
.,. As soon as possib le, have the
tightening
torques
on all whee l bolts che cked with a
torque wre nch. The correc t tig hten ing tor ­
que is 90 ft l b (120 Nm).
... Have the flat tire
replaced as soon as possi ­
ble.
@ Tips
- If you not ice that the w heel bo lts a re
co rroded and difficult to turn while
chang ing a tire, t hey shou ld be rep laced
before you check the tig htening to rque.
- Dr ive at reduced speed until you have the
t ightening torques checked.
- After changing a whee l, the t ire p ress ure
in all four tires must be chec ked/co rrect ­
ed and the tire p ress ure monito ring in di­
cator must b e sto red in th e MMI
¢ page 269 .
' Decorative wheel covers
Applies to vehicles: w ith decorative whee l covers
The decorative wheel covers must be removed
first to access the wheel bolts.
Fig. 217 C ha ngin g a w hee l: Remov ing th e w heel cove r
Removing
.,. In sert the hook (p rov ided with t he vehicle
t oo l ki t) in the hole in the whee l hub cover . .,..

CD Note
Do not lift the vehicle by the sill. Position
the vehicle jack only at the designated lift ­
ing points on the sill. Otherwise , your vehi­
cle will be damaged.
(D Tips
The vehicle jack mode switches off auto ­
matically at speeds above 10 km/h .
Taking the wheel off/installing the spare
Follow these instructions step-by-step for
changing the wheel.
Fig. 222 C h ang ing a w hee l: u sing t he sc rew drive r han ­
d le (w it h th e blade remov ed) to tu rn th e bolt s
Fig. 223 C h ang ing a w hee l: alig nme nt pin inside the
top hole
After you have loosened all wheel bolts and
raised the vehicle off the ground, remove and
replace the wheel as follows:
Removing the wheel
.. Use the hexagonal socket in the screwd riv­
er handle
to completely remove the top­
most wheel bol t and set it aside on a
clean
surface ¢ fig. 222 .
What do I do now? 27 7
.. Sc rew the threaded end o f the alignment
pin
from the tool kit hand-tight into the
empty bolt hole
¢ fig. 223 .
.. Then remove the other wheel bolts as de­
scribed above.
.. Take off the wheel leaving the alignment
pin in the bolt hole
¢(D .
Putting on the spare wheel
.. Lift the spare wheel and carefully slide it
over the alignment p in to guide it in place
¢ (]).
.. Use the hexagonal socket in the screwdriver
handle to screw in and tighten all wheel
bolts
slightly.
.,. Remove the a lignment pin and insert and
tighten the rema ining wheel bolt slightly
like the rest .
.. Turn the jack hand le counter-clockwise to
lower the vehicle until the jack is fully re­
leased .
.. Use the wheel bolt wrench to tighten all
wheel bolts f irmly
¢ page 2 75. Tighten
them
crosswise, from one bolt to the (ap ­
proximately) opposite one, to keep the
wheel cente red.
CD Note
When removing or installing the wheel,
the rim could hit the brake rotor and dam­
age the rotor. Work carefully and have a
second person help you.
@ Tips
Never use the hexagonal socket in the han­
dle of the screwdriver to loosen or tighten
the wheel bolts.
- Pull the reversible blade from the screw­
driver before you use the hexagonal
socket in the hand le to turn the wheel
bolts.
- When mount ing tires with
unidirectional
tread design
make sure the tread pat­
tern is pointed the right way
¢page 278.
- The wheel bolts shou ld be clean and easy
to turn. Check for dirt and corrosion on
the mating surfaces of both the wheel

278 What do I do now?
and the hub. R emove a ll dirt from these
su rfaces before remo unt ing the wheel.
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in
the right direction .
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a spa re tire with a t read patte rn
i n te nded fo r use in a specific direction, please
note the fo llowing:
- T he direction o f rotation is marked by a n ar­
row on the side of the tire.
- If the spare t ire has to be in stalled i n the in ­
corre ct d irection, use the sp are tire on ly
temporarily since the t ire will not be a ble to
achieve its optimum perfo rmance character­
ist ics with rega rd t o aquaplaning, noise and
wea r.
- We recommend t hat you pay pa rticular at­
tent ion to this fact during wet weat her and
t h at y ou adjust your speed to matc h road
condit ions .
- Replace the flat tire w ith a new one and
have it installed o n your ve hicle as soon as
poss ible to restore th e handli ng a dvantages
of a un id irect iona l tir e.
Notes on wheel changing
Pl ease re ad the informa tion i:> page 260, New
t ires and repl acing tires and wheels
if you are
goin g to use a spare tire which is differen t
from the tires on your ve hicle.
Afte r you cha nge a tire :
-Check the t ire pressure on the spare imme ­
diately after installation .
- Have the wheel bolt tightening torque
checked with a torque wrench as soon as
possible by your authorized Audi dealer or
a qualified service station .
- With steel and alloy wheel rims, the wheel
bolts are correctly tightened at a torque of
90 ft lb (120 Nm) . -
If you notice that the wheel bolts are cor­
roded and difficult to turn while changing
a tire , they should be replaced before you
check the tightening torque.
- Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible. Remount the wheel cover .
Until then , drive with extra care and at re­
duced speeds.
A WARNING
- I f you are going to eq uip your vehicle
wit h tires or rims which differ from those
which were factory installed, then be sur e to r ead the information
i:> page 260,
New tir es and replacing tir es and
wheels.
- Always ma ke sure th e damag ed wh eel o r
e v en a flat tir e and th e jack a nd tool ki t
a re pr operly se cu red in the lugga ge co m­
p art me nt a nd a re not l oo se in the pas­
sen ger com partment .
- I n an a ccide nt or sudde n maneuver they
could fly forward, injuring anyone in the
veh icle.
- Always store dama ged whee l, j ac k and
t oo ls se curely in the l ugg age c omp art­
men t. Otherwise, in an acci dent o r sud ­
de n maneuve r they could fly forwa rd,
causing inj ury to passen gers in the vehi­
cle.

2 90 General information
General information Explanation of
technical data
Some of the technical data listed in this man ­
ual requires further explanation .
The technical data for your vehicle is listed in
the charts starting on
r:::> page 292. This sec ·
tion provides general information, notes and restrictions which apply to this data .
Vehicle identification
The key data is given on the vehicle identifica·
tion number (VIN) plate and the vehicle data
sticker.
Fig. 238 Veh icle Ide ntific atio n Number (VlN) p late: lo­
cation on driver 's sid e das h panel
Fig. 239 The vehicle identi fication label -inside the
luggage co mpa rtmen t
The Vehicle Identification Number (VIN)
is located on the driver's side so that it is visi­
b le from the outside through the windshield
r:::> fig . 238. You can also display the Vehicle
Identification Number of your vehicle in the
MMI. Select: Function button
ICAR ! > Car sys­
tems
> VIN number . The
vehicle identification label
is located in the luggage compartment in the
spare wheel wel l.
The label¢
fig. 239 shows the following vehi­
cle data :
(D Production control No .
@ Vehicle identification No.
® Type code number
@ Type designation/engine output in Kilo·
watts
® Engine and transmission code letter
@ Paint No./Interior
(f) Optional equipment No.'s
Vehicle data 2 to 7 are also found in your War·
ranty
& Maintenance booklet.
The safety compliance sticker
is you r assurance that your new vehicle com­
plies with all applicable Federal Motor Vehicle
Safety Standards which were in effect at the
time the vehicle was manufactured . You can
find this sticker on the left door jamb.
It
shows the month and year of production and
the ve hicle ident ification number of your vehi ·
cle (perforation) as well as the Gross Vehicle
Weight Rating (GVWR) and the Gross Axle
Weight Rating (GAWR) .
The high voltage warning label
is located on the lock carr ier .
The spark ignition system complies with
the Canadian standard ICES-002.
Weights
Gross Vehicle Weight Rating
The Gross Vehicle Weight Rating (GVWR), and
the Gross Axle Weight Rating (GAWR) for
front and rear are Listed on a sticker on the
left door jamb.
The Gross Vehicle Weight Rating includes the
weight of the basic vehicle plus full fuel tank,
oi l and coolant, plus maximum load, wh ich in·
eludes passenger weight (lSO lbs/68 kg per
Ill>

310 Index
Special considerations for pregnant
women .... ... .... ......... ..... . 149
Unfasten ing . ............. ... .... . 149
Warning/indicator light ...... .. .... . 144
Warning light .. ............ .. .... .. 16
WhyYOU MUSTwearthem ..... .. ... 144
Worn properly .... ... .... .. .. .. .. . 146
Safety belt tensioner drive select ....... ....... .. .. .. .. . 109
Safety belt warn ing ligh t .. .. .. .. .. .. . 144
Safety compliance st icker ....... .. .. . 290
Safety equipment .................. . 134
Safety features for occupant restraint and
protection . .. .. . ... ....... .. .. .. .. . 134
Safety guidelines Seat adjustment ...... .... .. .. .. .. .. 57
Safety instructions Engine compartment ...... .. .. .. .. . 232
for side cu rtain airbags . . . . . . . . . . . . . 17 4
for using child safety seats ....... .. . 179
for using safety belts ....... ..... .. . 147
Mon itoring the Advanced Airbag Sys-
tem ... .. ... ............ .. .. .. .. . 165
Safety systems
Warning/ indicator lights ... .. .. .... .. 18
Seat adjustment Controls (front seats) . . . . . . . . . . . . . . . . 58
Controls (rear seats) . . . . . . . . . . . . . . . . 60
Driver's seat .. ........... .. .. .... .. 57
Front passenger 's seat . . . . . . . . . . . . . . . 58
Front seats . .............. ... .. ... . 57
He ad restraints . . . . . . . . . . . . . . . 64, 138
Reclining rear seat ........ .. .. .... .. 6 1
Safety guidelines ....... .. .. .. .. .. .. 57
Sea t belts
WhyYOU MUSTwearthem ..... .. ... 144
Seat heating/ventilation ........ .... . . 80
Seating position
Driver ... .. ... .......... .. .. .. .. . 135
Fr ont passenger .............. .... . 136
How to adjust the front seats ..... ... 136
Incorrect seat position ........... .. . 138
Occupants .... ........... .. .. .... . 135
Rear passengers .......... .. .. .. .. . 13 7
Seat memory . . . . . . . . . . . . . . . . . . . . . . . 65 Seats
Comfort seat side view . . . . . . . . . . . . . . 66
Seat symmetry . . . . . . . . . . . . . . . . . . . . . 66
Seats (numbe r) .. .. ............. .. .. 144
Selective unlock feature . ...... ... .. .. . 33
Se lector lever . . . . . . . . . . . . . . . . . . . . . . 115
Serv ice and disposal
Safety belt pretensioner . . . . . . . . . . . . 151
Service interval display . . . . . . . . . . . . . . . . 2 7
Service position
refer to Windshield wipers .......... . 53
Servotronic (power steer ing system) .. .. 202
Shift paddles .. .. .. ............. .. .. 118
Ship (transporting your vehicle) ...... .. 288
S ide airbags
Description .. .. .. .......... ...... . 170
How they work .... ............ .. .. 171
Side assist .. .... ................... 105
Activating and deactivating ....... ... 107
Adjusting the brightness ........ .. .. 107
Cleaning sensors 218
Sensor range .... ............. .... 106
Side curtain airbags ............. .... 173
Description .. .. .. ..... ........... . 173
How they work ... ..... ........... . 174
Safety instructions ................ . 17 4
Side marker lights .............. .... . 45
Ski sack
refer to Pass-through with ski sack . ... . 70
Sliding/tilting sunroof Emergency closing .... ...... ... .. .. . 43
Emergency operation . . . . . . . . . . . . . . . . 44
Opening and closing ........... .. .. . 42
Panoramic sunroof ................ .. 43
Snow chains .. .. .. ....... ...... .. .. 265
Sockets . . . . . . . . . . . . . . . . . . . . . . . . 67, 73
Solar operation (automatic climate con-
trol) ... .. .. .... .. ............. .... . 81
Sources of information about child re-
stra ints and their use .... ......... ... 195
Space-saving spare tire ........... .... 272
Spare tire
refer to Compact spare tire .......... 272
Spare wheel .. .. .. ..... ........... . 273
Spe edometer . . . . . . . . . . . . . . . . . . . . . . . 26
Speed rating letter code .......... .... 262