2013 AUDI A7 instrument cluster

CD
@
®
©
®
®
(j)
Door handle
Audi side assist display
Power locking sw itches
Memory function buttons .. .. .
Aud i side assist button ...... .
A ir vents with thumbwheel
Control lever for:
- T urn signal and high beam
- Audi act ive lane assist . .. .. .
@ Mu ltifunction steering wheel
with:
- Horn
- Driver's airbag
- Driver information system but-
tons ... ..... ....... ... .. .
- Audio/video , telephone, navi­
gation and voice recognition
buttons
- Steering wheel heating . ... .
- Shift padd les (automatic
transmission) ..... ... ... . .
® Instrument cluster ......... .
@ Head-up Display ........... .
@ Windshield washer system
lever ..................... .
@ Buttons for:
- MMI display
- Reset bu tton for tr ip odome-
te r .. .. ... .. ..... ... .. .. .
@ Starting the engine if there is a
malfunction ............... .
~ Knee airbag ........... .. .. .
@ Steer ing whee l adjustment, de­
pending on equipment:
- mechan ical .......... .. .. .
- electrical .... .. ..... ... .. .
@ Leve r for:
- Cru ise control system ... .. .
- Adaptive cruise contro l .. .. .
@ Button for sw itch ing the Head­
up Disp lay on/off, adjusting the
h eight .. ............. .. .. .
@ Instrument illumination ... .. .
@ Eng ine hood release ........ . 98
37
56
98
45 95
153 23
73
113 11
29
47
2 7
78
166
74
74
83
86
29
46
230
In strument s and control s 9
@ Data Link Connector for On
Board Diagnostics (OBD II)
@ Light switch ... .. . .. .... ... .
@ Buttons for :
- All-weather lights
- Night vision assistant .... .. .
- Rear fog lights .. .. .. ..... .
@ Power exterior m irror adjust-
ment ...... .. .. ..... ..... . 29
43
43
105 43
49
@ Rea r lid switch . . . . . . . . . . . . . . 38
@ Power w indows . . . . . . . . . . . . . 40
@ MMI display
@ Emergency flashe rs . . . . . . . . . . 44
@ Glove compartment . . . . . . . . . 60
@) Front passenger's airbag . . . . . 153
@ Valet parking feature . . . . . . . . 41
@ Drives (MMI)
@ Buttons/Indicator lights fo r
- Start-Stop-System . . . . . . . . . 80
- Parking system . . . . . . . . . . . . 116
- PASSENG ER AIR BAG OF F . . . . 162
- Rear spoiler . . . . . . . . . . . . . . . 198
- Electron ic Stabilization Con-
t rol . . . . . . . . . . . . . . . . . . . . . 198
@ Climate controls, depending on
vehicle equipment:
- Three-zone cl imate control . . 69
- F our-zone automatic climate
cont rol . . . . . . . . . . . . . . . . . . 71
@ Storage compartment or ash-
t ray wit h cigarette lighter . . . . . S8, 58
@ I S T ART ENGINE STOPI button 75
@ MM I controls
@ 12-volt socket, (upho lder 58, 59
@ E lectromechanical parking
brake . . . . . . . . . . . . . . . . . . . . . 78
@ Selector lever (a utomatic trans-
mission) 109
(D Tips
-Some of the equipment or fea tures
show n in the genera l ill ustration may be
standard equipment on your vehicle or
may be opt ional eq uipment depending
on your model. Always ask your
ll>

Instrument s and warning /indicator lights 11
Instruments and warning/indicator lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Overv iew of the instrument cluster
CD Coolant temperature gauge .. .
@ Tachometer (eng ine rev counter)
@ Turn signals ............... .
11
12
45
@ Display with
®
®
-Driver information system .. .
- Wa rning/ind icator lights
Tachometer Fuel gauge
@ Tips
23
12
12
The instrument illumination (for dials and
needles) turns on when the ignition is on
and the vehicle lights are turned off. As
the daylight fades, the illumination of the
dials likewise dims automatically and wil l
go out completely when the outside light
is very low. This feature is meant to rem ind
you to switch on the headlights when out­
side light conditions become poor.
Engine coolant temperature gauge
The engine coolant gauge CD¢ fig. 3 only
works when the ignition is on . To prevent
damage to your eng ine, please note the fol­
l owing important points:
Engine cold
If only the LEDs at the bottom of the gauge
turn on, the eng ine has not reached operating
temperature yet . Avoid high engine speeds,
heavy engine loads and heavy throttle applica­
tions.
Normal temperature
The engine has reached its operating temper­
ature once the LEDs up to the center of the
gauge turn on under normal driving cond i­
t ions. The LEDs higher up may turn on when
the engine is under heavy load or the exterior
temperature is high. This is no need to worry
as long as the. warning light in the instru­
ment cluster does not illuminate. If the LEDs
in the upper area of the disp lay and the indica­
tor light . in the instrument cluster display
turn on, the coolant temperature is too high
¢page 16.
A WARNING
-Always observe the warn ing in
¢ page 224, Engine compartment, be­
fore opening the hood and checking the
engine coolant level.

12 Instrum ent s and w arn ing /indic ato r light s
-Never open the engine hood if you see or
hear steam, or if you see engine coolant
dripping from the engine compartment.
You could burn yourself . Let the engine
cool off first until you can no longer see
o r hear steam or coo lant escaping.
@ Note
- Mounting additional lights or accessories
i n front of the a ir inlets reduces the cool­
i ng effect of the rad iator . At h igh outside
temperatures or high eng ine load, the
engine could overheat.
- The front spo iler has been designed to
proper ly distribute the cooling air when
t h e ve hicle is moving.
If the spoiler is
dam aged, th is co uld red uce the cooling
effect and the engine co uld then over­
heat . Ask your authorized Audi dea ler for
assistance .
Tachometer (engine rev counter)
The tachometer indicates the engine RPM
(revolutions per minutes).
If engine RP M drops be low 1,500, yo u should
downshift to the next lower gear. The red a rea
at the end of the sca le indicates maximum
perm iss ib le engine RPM after the break-in pe­
riod. Before reaching this area, move these­
lector lever to position D/S (Drive) or ease
your foot off the accelerator pedal.
(D Note
The tachometer needle should on ly br iefly
be in the red zone: you could damage your
engine! The beginn ing of the red zone var­
ies depending on the engine .
@ For the sake of the environment
Upshifting early saves fuel and reduces en­
gine noise.
Fuel gauge
The fuel gauge only works when the ignition is
on .
If the fuel level d rops below 2 . 6 ga llons (10 liters), the bottom LED turns red and the
indicator light
Em turns on
¢ page 22. The
bottom LED blinks red when the fuel level is
very low.
T he possible range based on the current fuel
level is shown in tab@<=>
fig. 4.
(D Note
Never run the tank completely dry. An ir ­
r egular supply of f uel can cause engine
misfiring and fuel could enter the ex haust
system . The catalytic converter could then
overheat and be damaged.
Warning/indicator lights
Description
The ind icator lights in the instrument cluster
blink or turn on. They indicate funct ions or
malfunc tions <=>,& .
Messages may appear with some indicato r
lights. A warning signal will sound at the
same t ime. The indicator lights and messages
in the center of the displays may be rep laced
by other d isplays . To show them again, select
the tab for ind icator lights and messages us­
i ng the multifunction steering wheel
Q page 23. If t here are several malfunc­
t ions, you can display them one at a time us­
ing the thumbwheel.
Some indicato rs lights in the d isplay can tu rn
o n in severa l co lors.
A WARNING
- F ailure to heed w arning l igh ts and other
important vehicle in forma tion may res ult
in ser io us personal inj ury or vehicle dam­
age .
- Whenever stalled or stopped for repair, move the vehicle a safe d istance off the
road, stop the engine, and turn on the
emergency flasher<=>
page 44.
-The engine compartment of any motor
veh icle is a potentially hazardous area.
Before you chec k anything in the engine

20 Instruments and warning/indicator lights
If the battery te rm inals were disconnected
and re-connected, the vehicle was j ump sta rt­
ed or the batte ry is very weak, the ESC sensor
system goes through a learning process for
the first few yards. The warning/ind icator
light illuminates . The war ning/ indicato r light
goes out as soon as the learning proc ess is
comp lete .
For more informat io n about t he ESC
¢ page 196.
ABS/( @) Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differ ential lock (EDL).
The warning/indicator light E (USA mod­
e ls)
;£1 (Canada mode ls) will come on fo r a
few seconds when the ignition is switched on.
The light will go out after an a utomat ic chec k
se quence is completed .
There is a malfunction in the ABS when :
-The warning/ indicator lig ht d oes not ill umi ­
nate whe n you switch the ign ition on.
- The wa rning/i ndicator lig ht does not go out
after a few seconds .
- The warning/indicator lig ht illumi nates
wh ile driving.
T he ESC ind ic a tor light a lso ill umin ates if
the re is a mal func tion in the A BS. T he mes ­
sage
Stabilization control (ESC/ABS ): Fault!
See owner's manual
a lso appears in the in ­
strument cluster disp lay and a warning tone
s o unds .
The brake system will still respond even
without the assistance of the ABS system .
See your authorized Audi dealer as soon as possible to restore full braking performance.
For more informat io n regarding the ABS
¢ page 196.
Malfunction in the brake system
If the brake wa rn ing light ¢ page 15 and the
ABS warning ill uminate
together there may be
a ma lfunction in the ABS, and there may also
be a ma lf u nct ion in the brake system itself
c::> /1. . The ABS will not work and you will no- tice a change in braking respon
se and per­
formance .
In the even t of a malfunction in the brake
system
t he warning/ind ic at or ligh t 11111
(U SA mode ls)/ . (Canada models) in the in ­
str ument cl uster flas hes
c::> page 15 .
Malfunction in the electronic differential
lock (EDL)
The E DL works toge ther w it h the AB S. T he
ABS wa rnin g light wi ll come on if there is a
malfu nction in t he EDL system
c::> page 196.
See your author ized Audi dealer as soon as
poss ib le .
A WARNING
-- If the E (USA mode ls)/ rl] (Canada
mo dels) warning light does not go ou t,
or if i t com es on whi le driving, t he ABS
s y st em is not wor king pr ope rly. The vehi ­
cle can the n be st opped only wit h the
s ta nda rd b ra kes (withou t A BS) . Yo u w ill
not have the protect ion A BS provides .
Contact your Audi dea le r as soon as pos­
sible.
- USA models: If t he 11111 warning light,
the
J_j) wa rnin g light and t he E warn­
ing light come on together, the rear
wheels could lock up f irst under hard
b rak ing. Rear wheel lock-up can ca use
loss of vehicl e co ntrol and an accident.
Hav e your ve hicle repair ed imm ediat ely
by y our authori zed A udi deale r or a quali­
fi ed work sh op. Dr ive slo wly and avoid
sud de n, hard bra ke applicat ions.
-Canada models: If the br ake w arn ing
ligh t. , the
G1 wa rning light a nd th e
A BS warning ligh t
SJ come on together,
the rear wheels could lock up first under
ha rd br aking. Rea r whee l loc k-u p can
cause loss of vehicle con tro l an d an acci­
dent. Have your veh icle repa ired immedi ­
ately by your authorized Audi dealer or a
qualified works hop. Drive s lowly a nd
avoid sudde n, hard b ra ke app lications.
-

Instrument s and warnin g/indic ator ligh ts 21
(0 ) Worn brake pads
rl] Brak e pad s!
If the warn ing light illum inates, immediately
contact your authorized Audi dealer or quali­
fied workshop to have all brake pads inspect­
ed. On USA models the wa rning light
rl]
comes on togethe r with the warn ing light
.. . Both sets of b rake pads on an axle
must always be replaced at the same time .
~ WARNING
Driving with bad brakes can cause a coll i­
sion and serious personal injury.
- If the warning light rl] and the wa rning
light ..
1> with the message Bra ke
pads !
comes on in the instrument cluster
display, immediately contact your au­
thorized Aud i dea ler or qualified work­
shop to have all brake pads checked or
replaced if necessary .
EPC Electronic power control
This warning/indicator light monitors the
electronic power control .
The Im warning/ indicator light (Electron ic
Power Control) illuminates when you switch
the ignition on as a function check .
(!) Tips
If this wa rning/indicator light ill uminates
while you are dr iving, then there is a mal­
function in the engine electron ics . Have
the malfunction co rrected as soon as pos­
sible by you r autho rized Aud i dea le r or
qua lified repair fa cility.
o Malfunction Indicator Lamp (MIL)
The Malfunc tion Ind icator Lamp (M IL) is par t
of the On -Boa rd Diagnostic (OB D II) system.
The symbol ¢• tights up when the ignition is
switched on and w ill tur n off after the engine
has started and has sett led at a constant id le
1 ) - : USA mod els on ly
-
speed. This indicates that the M IL is work ing
properly .
T he wa rni ng lig ht ill uminates w hen the re is a
malfu nction in t he engine electron ic system .
Contact your a uth orized Audi dea ler and have
the malfunction corrected .
An imprope rly closed fuel fille r cap may a lso
ca use the M IL light to illuminate~
page 2 2 7 .
Fo r more information ~ page 29.
!?) Engine speed limitation
App lies to vehicles: wit h eng ine speed limitat ion
(I! Engine sp ee d maximum XXXX RPM
The eng ine speed is automatically limited to
the speed d isplayed in the driver information
system. Th is protects the engine from over­
heating.
The eng ine speed limitation deactivates once
the engine is no longer in the critical tempera­
tu re range and you have re leased the accelera­
tor pedal once.
If the engine speed limitation was activated
by an engine control malfunction, the indica­
tor light
Im a lso tu rns on. Make sure that the
speed does not go above the speed disp layed.
Drive to your authori zed A udi dealer immedi ­
ate ly to have the ma lfunction corrected.
~. Engine oil level
II Add oil, max. x qt (l). You may continue
dri ving
When the symbol II and driver message ap­
pear, add the amount of oil appearing in the
display at the next opportunity ~
page 235.
~tt• Engine oil sensor
Ill Oil level! Sensor defective
If the symbol illumina tes, contact yo ur au ­
thorized Audi dea ler and have the oil sensor
inspected. Until yo u have this done, check the .,..

Instrument s and warning /indicator lights 2 7
Cylinder on demand System
Applies to vehicles: with 4.0 TFS! engine
Fig . 10 Instr ume nt cluste r: fuel cons umptio n
To save f uel, the eng ine automat ica lly t urns
f our cylinders on or off, depending on the
amount of power needed . This action is not
felt by the passengers .
Displaying cylinder mode
Requirement: the on-board computer is dis­
p layed
c:;, page 25.
~ Turn the thumbwhee l until the curren t fue l
co nsumption display is shown in the instru­
ment cluster.
If the green bar is d isp layed,
you are driving in 4-cylinder mode .
Basic requirements for 4 -cylinder mode
4 -cy linder drive mode is used automatically if
certain basic requirements are fu lfi lled . These
include :
- A low power o utp ut requi reme nt.
- D riving i n third gea r o r higher.
- E ngine speed between 960 and 3,500 RPM .
- A warm engine.
Odometer
Fig. 11 I n s tr um en t cluster : O dome te r an d rese t but­
t o n
T he odometer shows you how m any m iles
( kil omete rs) you have drive n. You can switch
the d isplay from miles to ki lometers and v ice
versa via t he M MI.
Upper odometer
The trip odomete r shows the dis tance driven
s ince it was last reset. It can be used to meas ­
u re short dista nces . The last digit indicates
1/10 of a mile (100 meters).
You can re set t he trip odometer to zero by
pressing the Reset bu tton
Efil .
Lower odometer
The lower odomet er shows the tota l numb er
of m iles (kilometers) dr iven.
Malfunction message
If there is a malfunc tio n i n the instrument
cluster,
DEF will appear in the trip odometer
display area . Conta ct your author ized Audi
dealer to have th e problem correct ed .
Time and date display
Fig. 12 Inst rumen t clus te r: cl ock and date
You can set the t ime and the date disp lay in
the MMI. Refer to the MMI owne r's man ual
for ins truc tio ns.
When you open the dr iver's door, the date and
time appear in the instrument cluster display
fo r 30 seconds.

28 Instr uments and warning/indicator lights
Service interval display
The service interval display reminds you when
your next service is due .
Fig. 13 Instrument cluster: Service interva l d isplay
The schedule for the next oil change o r inspec­
tion is calculated automatically and displayed
according ly . The display works in two stages:
Service reminder
30 days before the next service is due, a serv­
ice reminder appears in the display when you
switch the ignition o n
c::> fig. 13.
After about 5 seconds the display sw itches
back to normal. The distance and time re­
maining are updated each time the ignition is
switched on until the date due for service is
reached.
Service due
When the due date for service is reached, the
message
Service due! appears in the instru­
ment cluster immediately after you switch the
ignition on. Additionally, a warn ing tone
sounds. After about 5 seconds the display
switches back to normal.
Calling up the service schedules
If or when an oil change or inspect ion is due,
can be shown in the MMI display by select ing
the service interva l disp lay in the car menu .
Select the
!CAR ! function button> (Car)* sys­
tems
control button > Servicing & checks >
Service interval displays. In new vehicles, the
schedule can only be called up after approxi­ mately S00 km.
Resetting the service interval display
Your authorized Audi dea ler will reset the cor­
responding service schedule after performing
the appropriate service on your vehicle. You
also have the possibility to reset the oil
change schedule after having performed an
oil change according to Audi specifications.
Select the
ICAR I function button> (Car)* sys­
tems
control button > Servicing & checks >
Service Intervals> Reset oil change interval.
(D Note
If you disconnect the battery term inals, no
calculations can be made for the service
i nterval display during th is time and no
serv ice reminder will appear. Remember
that observing the proper service in tervals
i s vitally important to extending the life of
your vehicle, particularly the engine, and maintain ing its value. Even if the mileage
driven is low, the maximum period of one
year from one service to the next must not
be exceeded.
(D Tips
-Do not reset the display between oil
changes, otherwise the display w ill be in ­
correct.
- The information in the Service Reminder
remains stored even when the vehicle
battery is disconnected.

Ins trum ent s an d warnin g/indic ator light s 29
Head-up Display
Applies to vehicles: with Head-up Display
Fig. 14 Examp le: indicators in the Head-up Display
Fig . 15 Instrument pane l: knob for the Head-up D is­
play
The Head-up Display projects certa in warnings
or selected information from the assistance
systems* or nav igat ion* on the w indshield.
The display appears with in the driver's field of
vision.
Switching on /off
"' Press the knob~ to switch the Head-up
Display on/off
c::> fig. 15.
Adju sting th e hei ght
The height of the display can be adjusted to
the indiv idual driver.
"' Make sure you are seated correctly
c::>page 131.
"' Turn the knob~ to adjust the display .
Setting s in th e MMI
"' Se lect: ICARI funct ion button > (C ar)* sys ­
tems
control button > Driv e r Assist > He ad ­
u p Di spla y
> Head -up D ispl ay co nte nt or
Di spl ay bri ghtne ss.
Display cont ent
In the MM I, you can spec ify wh ich inform ation
shou ld be disp layed:
- Cruise control system*
- Navigation information*
- Audi adaptive cruise control*
- Aud i active lane assist*
- Night vision assistant* (pedestrian warning)
The speed disp lay and some of the red indica ­
tor lights cannot be hidden in the MMI.
Displa y brightn ess
You can adjust the display br ightness i n the
MMI. The disp lay br ightness decreases auto­
matically as the amount of light decreases.
T he basic level of br igh tness is adjusted w ith
the instrument illumination
c::> page 46.
(D Note
To prevent scratches on the glass cover ing
the Head-up Display, do not p lace any ob­
jects in the p rojection opening .
(D Tips
-Sunglasses with po larization filters and
unfavorab le lighting conditions can af­
fect the display.
- Veh icles with seat memory*: your Head­
up Display set tings are stored automati­
cally and assigned to the remote contro l
key that you are using.
- A special windshie ld is needed for the
Head -up D isp lay function.
- For information on cleaning, refer to
c::> page 220.
On-Board Diagnostic
system (OBD)
Malfunction Indicator lamp (MIL)
The Ma lfunction Indicator Lamp (MIL) ¢'4 in
the instrument cluster is part of the On-Board Diagnost ic (OBD II) system.
The warning/indicator light illuminates when
the ignition is switched on and goes out after ..,.