Page 204 of 292

Engine compartment
At the end of every winter, wash the engine compartment thoroughly,
taking care not to aim the jet of water directly at the electronic control
units or at the windscreen wiper motors. Have this operation
performed at a specialised workshop.
IMPORTANT The washing should take place with the engine cold and
the ignition key in the STOP position. After washing, make sure that the
various protective devices (e.g. rubber caps and guards) have not
been removed or damaged.
INTERIORSPeriodically check for water puddles under the mats that could cause
the panels to rust.
Never use flammable products, such as petrol ether or
rectified petrol to clean the inside of the car. The
electrostatic charges which are generated by rubbing
during the cleaning operation may cause a fire.Do not keep aerosol cans in the car: they might
explode. Aerosol cans must not be exposed to a
temperature exceeding 50°C. When the car is exposed
to sunlight, the internal temperature can greatly exceed this
value.
SEATS AND FABRIC PARTSRemove dust with a soft brush or a vacuum cleaner. It is advisable to
use a moist brush on velvet upholstery. Rub the seats with a sponge
soaked in a solution of neutral detergent and water.
200GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Page 205 of 292

LEATHER SEATS(for versions/markets, where provided)
Remove the dry dirt with a buckskin or slightly damp cloth, without
exercising too much pressure. Remove liquid or oil stains using a dry
absorbent cloth, without rubbing. Then clean with a soft cloth or
buckskin cloth dampened with water and neutral soap. If the stain
persists, use specific products and observe the instructions carefully.
IMPORTANT Never use alcohol. Make sure that the cleaning products
used contain no alcohol or alcohol derivatives, even in small quantities.
PLASTIC AND COATED PARTSClean interior plastic parts with a damp cloth (if possible made from
microfibre), and a solution of water and neutral, non-abrasive
detergent. To clean oily or persistent stains, use specific products free
from solvents and designed to maintain the original appearance
and colour of the components.
Remove any dust using a microfibre cloth, if necessary moistened with
water. The use of paper tissues is not recommended as these may
leave residues.
IMPORTANT Never use alcohol, petrols and derivatives to clean the
instrument panel lens.LEATHER PARTS(for versions/markets, where provided)
Use only water and neutral soap to clean these parts. Never use
alcohol or alcohol-based products. Before using a specific product for
cleaning interiors, make sure that it does not contain alcohol and/or
alcohol based substances.
201GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCYSERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
Page 206 of 292
TECHNICAL SPECIFICATIONS
IDENTIFICATION DATAThe identification details of the car are:
❒V.I.N. plate;
❒Chassis marking;
❒Body paintwork identification plate;
❒Engine marking.
V.I.N. PLATEThis plate is fitted to the engine compartment front crossmember and
contains the following data fig. 177:BType-approval number.CVehicle type identification codeDChassis serial number.EMaximum authorised weight of vehicle fully ladenFMaximum authorised weight of vehicle fully laden plus trailer.GMaximum permitted weight on first (front) axleHMaximum permitted weight on second (rear) axleIEngine type.LBodywork version code.M
Spares number.
NCorrect value of smoke coefficient (for diesel engines)fig. 177
A0K0024
202GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Page 207 of 292
CHASSIS MARKINGThis is printed on the passenger compartment floor, near the front right
seat.
Slide the flap A fig. 178 forward to access.
The marking includes:
❒vehicle type (ZAR 940000);
❒chassis serial number.BODYWORK PAINT IDENTIFICATION
PLATEIt is applied under the bonnet and shows the following data fig. 179:
APaint manufacturer.
BColour name.
CFiat colour code.
DRespray and touch up code.
ENGINE MARKINGThis is stamped on the cylinder block and gives the model and the
chassis serial number.
fig. 178
A0K0175
fig. 179
A0K0025
203GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
Page 208 of 292
ENGINE CODES - BODYWORK VERSIONSVersions Engine code Body versions
1.4 Turbo Petrol 120 HP198A4000940FXA1A 00
940FXA1A 00B
(*)
1.4 Turbo Petrol 105 HP
(**)
940B1000940FXN1A 12
940FXN1A 12 12B
(*)
1.4 Turbo Petrol 115 HP
(**)
940A6000940FXF1A 05
940FXF1A 05B
(*)
1.4 Turbo MultiAir940A2000940FXB1A 01E
940FXB1A 01F
(***)
940FXB1A 01G
(****)
940FXB1A 01H
(***) (****)
1.4 Turbo MultiAir
(**)
955A8000940FXG1A 06C
940FXG1A 06D
(*)
1750 Turbo Petrol940A1000 940FXC1A 02
1.6 JTD
M
940A3000940FXD1A 03C
940FXD1A 03D
(*)
(*) Versions with oversized brake calipers
(**) For versions/markets, where provided
(***) Versions with oversized brake calipers (16" tyres excluded)
(****) Versions for markets with reduced towing capacity (500 kg)
204GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Page 209 of 292
Versions Engine code Body versions
2.0 JTD
M170 HP940A4000940FXE1A 04
940FXE1A 04B
(*)
2.0 JTD
M136 HP
(**)
940A8000940FXM1A 09
940FXM1A 09B
(*)
2.0 JTD
M140 HP
(**)
940A5000940FXL1A 08
940FXL1A 08B
(*)
2.0 JTD
M163 HP
(**)
940A7000940FXH1A 07
940FXH1A 07B
(*)
(*) Versions with oversized brake calipers
(**) For versions/markets, where provided
205GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
Page 210 of 292
ENGINEGENERAL INFORMATION
1.4 Turbo Petrol 105 HP
(*)
1.4 Turbo petrol 115/120 HP
Engine code 940B1000940A6000
(*)
198A4000
Cycle Otto Otto
Number and arrangement of cylinders 4 in line 4 in line
Piston diameter and travel (mm) 72.0 x 84.0 72.0 x 84.0
Total displacement (cm³) 1368 1368
Compression ratio 9,8 9,8
Maximum power (EC) (kW) 77
85
(*)
/88
Maximum power (EC) (HP) 105
115
(*)
/ 120
corresponding engine speed (rpm) 5000 5000
Maximum torque (EC) (Nm) 206 206
Maximum torque (EC) (kgm) 21 21
corresponding engine speed (rpm) 2000 1750
Spark plugs NGK IKR9F8 NGK IKR9F8
FuelUnleaded petrol 95 RON
(EN 228 Specification)Unleaded petrol 95 RON
(EN 228 Specification)
(*) For versions/markets, where provided
206GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Page 211 of 292
GENERAL INFORMATION 1.4 Turbo MultiAir 1750 Turbo Petrol
Engine code940A2000
940A1000
955A8000
(*)
Cycle Otto Otto
Number and arrangement of cylinders 4 in line 4 in line
Piston diameter and travel (mm) 72.0 x 84.0 83.0 x 80.5
Total displacement (cm³) 1368 1742
Compression ratio 9,8 9,8
Maximum power (EC) (kW) 125
120
(*)
172,5
Maximum power (EC) (HP) 170
163
(*)
235
corresponding engine speed (rpm) 5500
5500
(*)
5500
NATURAL DYNAMIC NATURAL DYNAMIC
Maximum torque (EC) (Nm) 230 250 300 340
Maximum torque (EC) (kgm) 23,4 25,4 30,5 34,6
corresponding engine speed (rpm) 2250 2500 4500 1900
Spark plugs NGK IKR9F8 NGK ILKAR7D6G
FuelUnleaded petrol 95 RON or 98 RON
(EN 228 specification)Unleaded petrol 95 RON or 98 RON
(EN 228 specification)
(*) For versions/markets, where provided
207GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX