2013.5 Citroen DS4 RHD height adjustment

Instruments and controls




1.
Controls for audio and telematic system.

2.
Controls for Bluetooth system or telephone.

3.
Steering lock and ignition.

4.
Wiper / screenwash / trip computer control
stalk.

5.
Instrument panel.

6.
Driver's airbag.
Horn.

7.
Cruise control / speed limiter controls.

8.
Controls for optional functions.

9.
Door mirror controls.
Electric window controls.

10.
Storage compartment.

11.
Manual headlamp height adjustment
Lower side switch panel.

12 .
Fuel filler flap opening switch.
Upper side switch panel.

13.
Side adjustable air vent.

14 .
Front side window demisting vent.

17Familiarisation
Sitting comfortably


Manual adjustment

88




Driver's seat


Forwards-backwards
Height



Electric adjustment


Seat back angle



89

Sitting comfortably


Head restraint height and angle


Front seats


Other functions available...

Lumbar massage.
Heated seats.

90



1.
Releasing the adjustment mechanism.

2.
Adjustment for height and reach.

3.
Locking the adjustment mechanism.


Steering wheel adjustment


93

As a safety precaution, these
operations must only be carried out
when stationary.

Lumbar


91

Sitting comfortably


Door mirrors


Adjustment



A.
Selection of the mirror to be adjusted.

B.
Adjustment of the position of the mirror in
the four directions.

C.
De-selection of the mirror.

94




Other functions available...

Folding / Unfolding.
Automatic tilting of the mirror in reverse
gear for parking.
Blind spot sensors.



Rear view mirror


Manual day/night model



1.
Selection of the "day" position of the mirror.

2.
Adjustment of the mirror.



Automatic day/night model


96




A.
Brightness detection in automatic day/night
mode.

B.
Adjustment of the mirror.


1.
Fastening the buckle.

2.
Height adjustment.


Front seat belts


181

Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.


Manual adjustments


Forwards-backwards




Raise the control and slide the seat
for wards or backwards.



Driver's or passenger's seat
height



Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.



Seat backrest angle




Turn the control knob to adjust the seat
backrest angle.


As a safety measure, seat adjustments
should only be done when stationary.

89Comfort











Front seats
Seat consisting of a seat cushion, a seat backrest and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.


Driver's seat electric adjustments


Forwards-backwards




Push the control for wards or rear wards to
slide the seat.



Cushion height and angle




Tilt the rear part of the control upwards or
downwards to obtain the required height.


Tilt the front part of the control upwards or
downwards to obtain the required angle.



Seat backrest angle




Tilt the control for wards or rear wards to
adjust the angle of the seat backrest.


The electrical functions of the driver's seat
are deactivated approximately one minute
after the ignition is switched off.
To reactivate them, switch on the ignition.

Heated seats control

With the engine running, the front seats can be
heated separately.



Use the adjustment dial, placed on the side
of each front seat, to switch on and select
the level of heating required:

0:


Off.

1

:
Low.

2

:
Medium.

3

:
High.











Additional adjustments


Head restraint height and angle




To raise a head restraint, pull it upwards.


To lower the head restraint, press the lug A

and the head restraint at the same time.


To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards.

The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.




Removing a head restraint




To remove the head restraint, press the
lug A
and pull the head restraint upwards.


To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back and press the lug A
at the same time.


Never drive with the head restraints
removed; they must be in place and
adjusted correctly.

93Comfort
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:



release the backrest using control 1
,


tilt the backrest 2
slightly forwards,


pull the head restraint upwards to the stop,


then, press the lug A
.


Rear head restraints

Never drive with the head restraints
removed; they must be in place and
correctly adjusted.









Steering wheel adjustment





When stationary
, pull the control lever to
release the adjustment mechanism.


Adjust the height and reach to suit your
driving position.


Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.