8-119 1. Arrow mark
1. Flèche
1. Flecha
1
1. Tapered nut
1.Écrou conique
1. Tuerca cónica
1
EVU00940
Wheel installation
1. Install the wheel and the nuts.
The arrow mark on the tire must point
toward the rotating direction of the wheel.
Tapered nuts are used for both the front
and rear wheels. Install the nuts with their
tapered side towards the wheel.
2. Lower the vehicle so that the wheel is on the
ground.
3. Tighten the wheel nuts in crisscross pattern
to the specified torque.
WARNING
Do not reverse the rims on the Rhino to widen
the track width. Installing wheels improperly
increases the risk of wheel failure and acci-
dents.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf)
1RB60-EE.book Page 119 Thursday, April 7, 2011 10:43 AM
10-1
1 -SPECIFICATIONS
Dimensions:Overall length:
2885 mm (113.6 in)
Overall width:
1385 mm (54.5 in)
Overall height:
YXR700FAB 1853 mm (73.0 in)
YXR7FSPB 1901 mm (74.8 in)
YXR7FB 1853 mm (73.0 in)
Seat height:
818 mm (32.2 in)
Wheelbase:
1910 mm (75.2 in)
Ground clearance:
280 mm (11.0 in)
Minimum turning radius:
3900 mm (154 in)Weight:With oil and fuel:
YXR700FAB 540.0 kg (1190 lb)
YXR7FSPB 548.0 kg (1208 lb)
YXR7FB 540.0 kg (1190 lb)
Noise and vibration level:
Noise level (77/311/EEC):
YXR7FSPB 80.2 dB(A)
YXR7FB 80.2 dB(A)
Vibration on seat (EN1032, ISO5008):
YXR7FSPB Will not exceed 0.5 m/s²
YXR7FB Will not exceed 0.5 m/s²Vibration on steering wheel (EN1032, ISO5008):
YXR7FSPB Will not exceed 2.5 m/s²
YXR7FB Will not exceed 2.5 m/s²
Engine:Engine type:
Liquid cooled 4-stroke, SOHC
Cylinder arrangement:
Forward-inclined single cylinder
Displacement:
686 cm³
Bore × stroke:
102.0 × 84.0 mm (4.02 × 3.31 in)
Compression ratio:
9.20 : 1
Starting system:
Electric starter
Lubrication system:
Wet sumpEngine oil:Recommended brand:
YAMALUBE
1RB60-EE.book Page 1 Thursday, April 7, 2011 10:43 AM
