2012 YAMAHA RHINO 700 brakes

EVU00050
1 -CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION ........................................ 3-1
INSTRUMENT AND CONTROL
FUNCTIONS ............................................ 4-1
Main switch........................................... 4-1
Indicator lights and warning lights ........ 4-3
Multi-function meter unit ..................... 4-13
Light switch......................................... 4-25
Accelerator pedal ............................... 4-29
Brake pedal ........................................ 4-31
Parking brake lever ............................ 4-31
Drive select lever ................................ 4-33
Fuel tank cap ...................................... 4-33
Doors .................................................. 4-35
Seats .................................................. 4-37
Seat belts ........................................... 4-39
Glove compartment ............................ 4-39
Cup holders ........................................ 4-41
Cargo bed........................................... 4-43
1234
Adjusting the front and rear shock
absorber assemblies (YXR7FB/
YXR700FAB) ................................... 4-49
Adjusting the front shock absorber
assemblies (YXR7FSPB)................. 4-53
Adjusting the rear shock absorber
assemblies (YXR7FSPB)................. 4-67
Trailer hitch bracket and receiver....... 4-79
Auxiliary DC jack ................................ 4-79
FOR YOUR SAFETY –
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-7
Fuel .................................................... 5-11
Engine oil ........................................... 5-19
Coolant............................................... 5-21
Final gear oil ...................................... 5-23
Differential gear oil ............................. 5-23
Accelerator pedal ............................... 5-25
Seat belts ........................................... 5-25
Steering.............................................. 5-27
Fittings and fasteners......................... 5-27
Instruments, lights and switches ........ 5-29
Control cables .................................... 5-29
5
1RB60-EE.book Page 1 Thursday, April 7, 2011 10:43 AM

PERIODIC MAINTENANCE AND
ADJUSTMENT ......................................... 8-1
Owner’s manual and tool kit ................. 8-5
Periodic maintenance chart for the
emission control system ..................... 8-7
General maintenance and lubrication
chart ................................................... 8-8
Hood ................................................... 8-17
Console .............................................. 8-21
Engine oil and oil filter cartridge ......... 8-25
Final gear oil ....................................... 8-39
Differential gear oil ............................. 8-47
Coolant ............................................... 8-55
Axle boots........................................... 8-59
Spark plug inspection ......................... 8-61
Cleaning the air filter element............. 8-67
Drive select lever box check hose ...... 8-79
V-belt cooling duct check hose........... 8-79
V-belt case drain plug......................... 8-81
Cleaning the spark arrester ................ 8-83
Valve clearance .................................. 8-85
Brakes ................................................ 8-87
Checking the front and rear brake
pads ................................................. 8-89
Checking the parking brake pads ....... 8-91
Checking the brake fluid level ............ 8-93
Brake fluid replacement...................... 8-99
8
Checking the brake pedal .................. 8-99
Parking brake lever free play
adjustment ..................................... 8-101
Brake light switch adjustment .......... 8-105
Cable inspection and lubrication ...... 8-107
Brake pedal and accelerator pedal
lubrication ...................................... 8-109
Rear knuckle upper and lower pivot
lubrication (left and right) ............... 8-111
Steering shaft lubrication ................. 8-115
Wheel removal ................................. 8-115
Tire replacement .............................. 8-117
Wheel installation ............................. 8-119
Battery.............................................. 8-121
Jump-starting ................................... 8-131
Fuse replacement ............................ 8-137
Replacing a headlight bulb............... 8-143
Headlight beam adjustment ............. 8-149
Tail/brake light bulb replacement ..... 8-151
Troubleshooting ............................... 8-157
Troubleshooting charts .................... 8-159
CLEANING AND STORAGE ................... 9-1
A. Cleaning .......................................... 9-1
B. Storage ............................................ 9-7
SPECIFICATIONS................................. 10-1
910
1RB60-EE.book Page 3 Thursday, April 7, 2011 10:43 AM

5-1
EVU01200
1 -FOR YOUR SAFETY – PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always fol-
low the inspection and maintenance procedures and schedules described in the Owner’s Manual.
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equip-
ment damage. Do not operate the vehicle if you find any problem. If a problem cannot be corrected
by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer.Before using this vehicle, check the following points:
ITEM ROUTINE PAGE
BrakesCheck operation, free play, fluid level, and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-7–5-9, 8-87–8-89,
8-93–8-97, 8-103
Parking brakeCheck for proper operation, condition, and free play. 8-91, 8-99–8-101
FuelCheck fuel level.
Fill with fuel if necessary.5-11–5-17
Engine oilCheck oil level.
Fill with oil to proper level if necessary.5-19, 8-25–8-37
CoolantCheck coolant level.
Fill with coolant if necessary.5-21, 8-55–8-57
Final gear oil/
Differential gear oilCheck for leakage. 5-23, 8-39–8-53
Accelerator pedalCheck for proper accelerator pedal operation. 5-25
Seat beltsCheck for proper operation and belt wear. 5-25
1RB60-EE.book Page 1 Thursday, April 7, 2011 10:43 AM

5-7
EVU00390
Front and rear brakes
Brake pedal
Check that there is no free play in the brake pedal.
If there is free play, have a Yamaha dealer check
the brake system. (See page 8-97.)
Check the operation of the brake pedal. It should
move smoothly and there should be a firm feeling
when the brakes are applied. If not, have the vehi-
cle inspected by a Yamaha dealer.
Brake fluid level
Check the brake fluid level. Add fluid if necessary.
(See pages 8-93–8-97.)
Specified brake fluid: DOT 4
1RB60-EE.book Page 7 Thursday, April 7, 2011 10:43 AM

5-9
Brake fluid leakage
Check to see if any brake fluid is leaking out of the
pipe joints or the brake fluid reservoir. Apply the
brakes firmly for one minute. If there is any leak-
age, have the vehicle inspected by a Yamaha
dealer.
Brake operation
Check the operation of the brakes at the start of
every ride. Test the brakes at slow speed after
starting out to make sure they are working proper-
ly. If the brakes do not provide proper braking per-
formance, inspect the brake system. (See pages
8-87–8-89, 8-93–8-97.)
1RB60-EE.book Page 9 Thursday, April 7, 2011 10:43 AM

7-35
Wear eye protection when operating or riding the
vehicle to reduce the risk of a serious accident or
injury. Eye protection, such as a face shield or
goggles, may reduce the risk of foreign material
getting in your eyes and help prevent loss of vi-
sion.
Practice for new Rhino users
You should become familiar with the performance
characteristics of the vehicle in a large, flat area
that is free of obstacles and other vehicles. Prac-
tice controlling the accelerator pedal, brakes,
steering, and drive select lever. Drive at slow
speeds with gradual acceleration and turning.
Practice smooth throttle application. Practice slow-
ing down before turning. Practice maintaining a
steady throttle through the turn. Avoid higher
speeds until you are thoroughly familiar with the
operation of your vehicle. Remember, driving ag-
gressively or making abrupt maneuvers even on
flat, open areas can cause side rollovers.
1RB60-EE.book Page 35 Thursday, April 7, 2011 10:43 AM

7-45
Braking
When slowing down or stopping, take your foot off
the accelerator pedal and press the brake pedal
smoothly. Improper use of the brakes can cause
the tires to lose traction, reducing control of the ve-
hicle and increasing the possibility of an accident.
Braking ability is affected by type of terrain. In most
cases, gradual application of the brakes is more
effective than abrupt braking, particularly on loose
surfaces, such as gravel. Always allow for greater
braking distance on rough, loose, or slippery sur-
faces.
Engine braking
Engine compression braking is designed to assist
you when operating your Rhino off-road. With this
feature, the engine helps slow the vehicle down af-
ter you take your foot off the accelerator. Engine
braking is more noticeable in four-wheel drive. Ap-
plication of vehicle brakes provides additional
stopping power.
1RB60-EE.book Page 45 Thursday, April 7, 2011 10:43 AM

7-59
Slow down when you reach the crest of the hill if
you cannot see clearly what is on the other side –
there could be another person, an obstacle, or a
sharp drop-off.
If you start to lose traction or momentum when
climbing, and decide you will be unable to contin-
ue, use the brakes to stop. Do not attempt to turn
the vehicle around. With your foot on the brake
pedal, look behind you and plan your descent.
Shift the drive select lever into reverse so you can
use engine braking to slow your descent. Release
the brake and begin to coast down the hill. Use en-
gine braking as much as possible, gently applying
the brakes when necessary.
1RB60-EE.book Page 59 Thursday, April 7, 2011 10:43 AM