2012 YAMAHA GRIZZLY 125 maintenance

[x] Cancel search: maintenance

Page 72 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-3
8
EBU21743Periodic maintenance chart for the emission control system TIPFor ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.For ATVs equipped with an

Page 73 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-4
8
6*Exhaust systemCheck for leakage and replace gasket(s) if neces-
sary.
Check for looseness and tighten all screw clamps 
and joints if necessary.√√√
7 Spark arresterClean.√√√ NO.

Page 74 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-5
8
EBU21865General maintenance and lubrication chart TIPFor ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.For ATVs equipped with an odometer or an ho

Page 75 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-6
8
4*WheelsCheck runout and for damage, and replace if nec-
essary.√ √√√
5*TiresCheck tread depth and for damage, and replace if 
necessary.
Check air pressure and balance, and correct i

Page 76 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-7
8
14*Steering systemCheck operation and repair or replace if damaged.
Check toe-in and adjust if necessary.√√√√√
15 Engine oilChange.
Check ATV for oil leakage, and correct if neces-

Page 77 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-8
8
EBU23061TIPSome maintenance items need more frequent service if you are riding in unusually wet, dusty, sandy or
muddy areas, or at full-throttle.U1PY60E0.book  Page 8  Friday, March 11, 2011  9

Page 78 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-9
8
EBU23213Checking the spark plug The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the spark
plug should

Page 80 of 132

YAMAHA GRIZZLY 125 2012  Owners Manual 8-11
8
TIPIf a torque wrench is not available when installing
the spark plug, a good estimate of the correct
torque is 1/4–1/2 turn past finger tight. However,
the spark plug should be tightened to
Page:   < prev 1-8 9-16 17-24 25-32 next >