49
49
3 PRESET 1-5Initiates a call to the registered phone number.
4 PRESET 6Mutes your voice and switches the phone function from this unit to your mobile phone.
5 TEXTIf you press TEX T when there is information that cannot finish being displayed, you can see information on continuation.
Making a Call
You can initiate a call from the
phonebook, by speed dialing,
entering the phone number or from
the call histories.
Using the PhonebookYou can make a call from the phonebook in this unit.
1 Press CALL, turn the
ROTARY ENCODER to select PHONEBOOK, and press the ROTARY ENCODER.
2 Turn the ROTARY ENCODER
to select the desired contact name (or phone number) from the phonebook, and press the ROTARY ENCODER.
If you turn the ROTARY
ENCODER to select A-Z SEARCH and press the ROTARY ENCODER, you can select the first letter of the contact name and narrow down the search. Select the first letter of the name from the alphabet (A to Z) or select OTHERS (numbers from 0 to 9 and symbols).
3 Check the phone number and
press CALL.
Using Speed DialingYou can make a call from the phone numbers registered to speed dialing.
1 Press CALL, turn the ROTARY
ENCODER to select SPEED DIALS, and press the ROTARY ENCODER.
2 Press the PRESET button to
which the phone number you want to call is registered.
3 Check the phone number and
press CALL.
Using the Call HistoriesYou can make a call by displaying the call histories (last call, outgo-ing calls, incoming calls, missed calls or all calls).
1 In the TEL menu, turn the
ROTARY ENCODER to select L AST NUMBER, INCOMIN CALL, OUTGOIN CALL, MISSED CALLS or ALL CALLS, and press the ROTARY ENCODER.
2 Turn the ROTARY ENCODER
to select the history you want to display, and press the ROTARY ENCODER (except last call).
3 Check the phone number and
press CALL.
63
63
When problems occur with the XM tuner, a message will appear on the display. Refer to the table below to iden-
tif y the problem, then take the suggested corrective action.
The XM Listener Care Center is also available on the phone, please call (800)-967-346 during the following hours:
Mon - Sat: 8 AM - 11 PM EST Sun: 8 PM - 8 PM EST
CK ANTENNA
The XM antenna is not connected.Check whether the XM antenna cable is attached securely.
A short-circuit occurring in the antenna or the surrounding antenna cable.Make sure that there is nothing unusual with the antenna or antenna cable.
NO SIGNALXM signal is too weak at the current location.Wait until your vehicle reaches a location with a stronger signal.
LOADINGUnit is acquiring audio or program information.Wait until the unit has received the information.
CH OFF AIRThe channel you selected is not broadcasting any programming.Select another channel.
CH UNAUTHThe unit is updating the encryption code.Wait until the update is finished.
CH UNAVAILThe unit is receiving a channel with no SID.
