2012 TOYOTA VENZA Accessories, Audio & Navigation (in English)

8
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY
Touch .
Touch the desired category location. Touch the desired category icon
followed by the desired sub-category.
Use
or to scroll up or down.
Touch the desired point of interest.
step1step2
step3step4
step5Touch . See page 15 to select
desired Route Preference. Touch
to start route guidance.
step6
Press DEST on the faceplate followed
by
.

9
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY - VOICE RECOGNITIONPress
on the steering wheel. After
the beep say, “Destination.” After the beep say, “Point of Interest.”
After the beep say, “Near Here.” After the beep say, “Hotels.” See
page 22 for the list of recognized POI
categories in addition to those displayed
on the screen.
After the beep say the number that
corresponds to the desired destination. step1step2
step3step4
step5
After the beep say, “Enter” to confi rm
destination. Touch to start
route guidance. step6
Quick Tip - If you kno w your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.

10
SET HOME
Touch .
Make sure you are in the desired
Search Area. Touch
. Input the city name and touch
.
step2
step3
step5step6
Press SETUP on the faceplate followed
by
.step1
Touch . Touch . step4 Tip - For security reasons, use a point close to
your home instead of your actual home address.

11
SET HOME
Input the street name and touch .
Touch
followed by
to change the home
icon.
Touch the desired icon for your
home. Touch
at the
bottom right of the Edit Home
screen.
step8
step9
step11step12
Touch the desired city name. step7
Touch the desired street name. Input the house number and touch . step10
Quick Tip - Enter the street name without prefi xes
such as North or the letter N. The system will display
the base street name without prefi xes or suffi xes on
the next screen.

12
CONNECT A BLUETOOTH PHONE
Touch . Verify that
Bluetooth feature on the phone is ON
and is in discoverable mode. step2
step3
Press INFOPHONE on the faceplate followed
by
.
step1
Input the passkey listed on the screen
into the approved Bluetooth cell
phone. Please refer to the cell phone
manufacturer’s user guide for pairing
procedures. Upon connection, the system will
indicate that the pairing process was
successful.step4
Quick Tip - Up to 4 Bluetooth cell phones can be
paired. However, only one Bluetooth cell phone can
be used at a time.
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please refer to
the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you
can dial by name using voice recognition. Please say the name exactly as it is entered in your phone
when in the telephone screen.

13
CALLING BY VOICE RECOGNITION
After the beep say, “Dial by Number.”
Call is active when
is
indicated. To end call, press

on the screen or
on the steering
wheel.
step2
step3
step5
Press on the steering wheel. After
the beep say, “Phone.”step1
After the beep say the phone number
digits individually, without pausing (e.g.
“Three, one, zero, four…”).After the beep, say “Dial” or press
on the steering wheel. step4
Quick Tip - A noisy environment may prevent the
voice recognition system from understanding your
commands. It is recommended that you reduce
background noise (including passenger conversation
and wind noise) prior to using the Voice Recognition
system.
Quick Tip - If you kno w your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.
Some Bluetooth® equipped cell
phones may or may not show battery or signal strength
on the display.
DIAL BY NUMBER

14
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press
on the steering wheel. After
the beep say, “Phone.”step1
Quick Tip - If you kno w your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep. After the beep say, “Dial by Name.”
step2
step3
After the beep say the name from the
contact list. If there is more than one
phone number for the contact follow
the prompt.
After the beep, say “Dial” or press
on the steering wheel. step4
Call is active when is indicated.
To end call, press
on the screen
or
on the steering wheel.
step5
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please refer to
the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you
can dial by name using voice recognition. Please say the name exactly as it is entered in your phone
when in the telephone screen.

15
ADDITIONAL NAVIGATION FEATURES
Once the address has been inputted, select the desired
route preference(s) for the trip. When the yellow bar
appears, the preference has been selected. For example,
if Toll Roads is not selected, the system will route over
non-toll roads which may take longer to reach the
destination.ROUTE PREFERENCES
Touch
to select from seven different screen
viewing options. Four screen preferences are available
when the map is visible and three additional are available
during route guidance only.
3 ROUTES
SCREEN PREFERENCES One of three routes may be chosen for the trip.
Quick- offers the shortest route by time
Alt- is the second fastest route
Short- is the most direct based upon driven mileage
Single Map
SEARCH AREASinggle Map
* Selections available when
in guidance mode only.
Dual Map
Compass
Freeway
Information * Turn List
* Arrow
* Intersection
Guidance
Prior to inputting the desired address select the Search
Area by pressing . If the incorrect Search
Area is chosen, the system will either fi nd an address
that closely matches in that area or will indicate that the
address cannot be found. Select the desired Search Area and touch .