2012 TOYOTA PRIUS V Owners Manual (in English)

Page 417 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 417
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
FUSEAmpereCircuit
14 STOP 10A Stop lights, high mounted stop-
light, brake system, driver support 
system, vehicle proxi

Page 418 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 418 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
FUSEAmpereCircuit
26 WIP 30A Windshield wipers
27 MET 7.5A Gauges and meters
28 IGN 10ABrake system, driver support sys-
tem, multiport fuel in

Page 419 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 419
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
■
After a fuse is replaced
● If the lights do not turn on even after the fuse has been replaced, a bulb
may need rep

Page 420 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 420 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.

Page 421 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 421
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
Light bulbs
You may replace the following bulbs by yourself. The difficulty level
of  replacement  varies  depending  on

Page 422 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 422 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
■Rear bulb locations
Rear turn signal light
Back-up light License plate lights

Page 423 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 423
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
4
Maintenance and care
Replacing light bulbs
■ Headlight low beams (halogen headlights)
For the right side only: Remove
the bolt and unclip t

Page 424 of 568

TOYOTA PRIUS V 2012  Owners Manual (in English) 424 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47784U)
Turn the bulb base counterclock-
wise.
Unplug the connector while
pressing the lock release.
When installing, reverse the steps listed.STEP 2