2012 TOYOTA PRIUS PLUS light

233
2-1. Driving procedures
2
When driving
PRIUS +_OM_OM47821E_(EE)
Turn signal lever
Turn signals can be operated when
The “POWER” switch is in ON mode.
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
The turn signal lever can be used to show the following intention of
the driver:
Right turn
Left turn
Lane change to the right
(push and hold the lever
partway)
The right hand signals will
flash until you release the
lever.
Lane change to the left
(push and hold the lever
partway)
The left hand signals will flash
until you release the lever.

239 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Instrument cluster light control
When the tail light is on, the brightness of the instrument cluster lights
can be adjusted. (For vehicles with the automatic light control sys-
tem, the lights can be adjusted when the tail light is on and the sur-
rounding area is dark.)
Ty p e A
The brightness will change by 4
steps each time the button is
pressed.
The reduced brightness can be
canceled by pressing and holding
the button. To turn on this func-
tion, press the button again.
Ty p e B

243 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Hybrid System Indicator
Hybrid System Indicator displays the hybrid system operating condi-
tion and provides Eco-friendly driving assistance in accordance with
the driving conditions and the acceleration.
Names and meaning of each icons
Eco Driving Indicator Light
Turns on when the vehicle is
driven in Eco-friendly.
Hybrid System Indicator
Refer to “Reading Hybrid System
Indicator” below.
EV indicator
The EV indicator comes on when
driving the vehicle using only the
electric motor (traction motor).
Reading Hybrid System Indicator
As shown below, the driving conditions of the vehicle can be con-
firmed by checking the status of the indicator.
Charge area
Eco area
Hybrid Eco area
Power area

244 2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)As shown below, the driving conditions of the vehicle can be con-
firmed by checking the status of the indicator.
*1: The images are examples only, and may vary slightly from actual condi-
tions.
*2: The displayed status is intended as a guide, and may differ from the
actual status.
*3: The gasoline engine will automatically stop and restart under various
conditions.
Hybrid System Indicator statusDisplay*1
Charge area:
Shows regenerative charging.
*2 (P. 39)
Eco area:
Shows that the vehicle is driven in Eco-friendly.
Hybrid Eco area:
Shows that gasoline engine power is not being
used very often.
*3
Power area:
Shows that the driving power is more than the
upper limit of Eco driving (during full power driv-
ing etc.).

245 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Changing Hybrid System Indicator settings
The items displayed on Hybrid System Indicator can be changed by
operating the “DISP” button. Stop the vehicle in a place in which the
operation can be safely carried out, apply the parking brake, and shift
the shift position to P.
After pressing the “DISP” button
to display the “SET” screen on
the trip information display, press
and hold the “DISP” button for 1
second or more.
The “SET” display and Hybrid
System Indicator will flash.
Press the “DISP” button while
the display is flashing to select
the items to be displayed.
The display items will flash.
Display all
Display Hybrid System Indica-
tor and EV indicator
Display Hybrid System Indica-
tor only
Display none
Display Eco Driving Indicator
Light only
STEP 1
STEP 2

246 2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)Press and hold the “DISP” button for 1 second or more to
complete the setup.
If setup is not completed by pressing and holding the “DISP” button
for 1 second or more, or if nothing is operated within approximately
10 seconds, the screen will return and the settings will be lost.
Eco Driving Indicator Light
Eco Driving Indicator Light will turn on when driving power is lower than the
upper limit of Eco driving. It will turn off when the acceleration exceeds the
Eco driving accelerator upper limit or when the vehicle is stopped.
Eco Driving Indicator Light will not operate in the following conditions:
The shift position is anything other than D.
The driving mode is set to power mode or EV drive mode. (P. 221, 226)
The vehicle speed is approximately 130 km/h (80 mph) or higher.
Eco Driving Indicator Light can be set to activated or deactivated.
(P. 245)
Remaining hybrid battery (traction battery) charge display
The charge amount of the hybrid battery (traction battery) is automatically
controlled by the hybrid system. For this reason, even if electricity is recov-
ered via the regenerative braking, or electricity is generated via the gasoline
engine, the displayed hybrid battery (traction battery) charge amount may
not reach the highest level (level 8). However, this does not indicate a mal-
function.
STEP 3

247 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even
when vehicle operation and driving conditions are the same.
Brightness of the instrument cluster light
If the headlight switch is turned to ON while the surrounding area is dark, the
instrument cluster lights will dim.
When disconnecting and reconnecting 12-volt battery terminals
The average fuel consumption and cruising range will be reset.
NOTICE
To prevent damage to the engine and its components
The engine may be overheating if the high coolant temperature warning light
comes on or flashes. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 528)
The trip information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

248
2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)
Indicators and warning lights
The indicator and warning lights on the instrument cluster inform the
driver of the status of the vehicle’s various systems.
Instrument cluster
Some indicators and the units used on the trip information display
etc. may differ depending on the target region.
Instrument panel