2012 TOYOTA PRIUS PLUS display

255 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Touch tracer display
When the audio control switches,
climate control switches, “DISP”
button or “TRIP” button of the
steering wheel are touched, the
touch tracer display will appear
in front of the display, with the
touched button highlighted to
allow the driver to identify the
button that is being operated.
The button can then be operated
by further presses.
If an audio/navigation system is
used that is not compatible with
the steering switches in this vehi-
cle, the audio switch display may
not operate correctly.

256 2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)
Turn-by-turn navigation display (if equipped)
When approaching an intersec-
tion while the navigation system
is giving route guidance, an
arrow will automatically be dis-
played on the head-up display to
indicate the direction of travel.
At one of the following distances
from the intersection, the guid-
ance display will be shown and
the distance to the intersection
will be shown in units of 50 m
(164 ft.).

257 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Setting up the display
Setting the brightness
The brightness of the display is automatically adjusted in accor-
dance with the brightness of the surrounding environment. How-
ever, the brightness can also be manually adjusted in 5 stages.
Brighter
Darker
The brightness can be manually
adjusted in 5 stages.
Adjusting the display position
Higher
Lower

258 2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)
Customizing the display
The following display can be shown or hidden.
Turn-by-turn navigation display (if equipped)
Touch tracer display
Temperature display which is set by the steering switches.
Press and hold the “SET” switch.
Customization can be performed
when the head-up display is on
and the vehicle is traveling at less
than 8 km/h (5 mph).
Press the “SET” switch and
select the item.
Turn-by-turn navigation dis-
play (if equipped)
Touch tracer display
Temperature display which is
set by the steering switches.
STEP 1
STEP 2

259 2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)Press the display position adjust-
ment switch to select ON or OFF.
Press and hold the “SET” switch.
STEP 3
System check display
After switching the “POWER” switch to ON mode, “welcome to PRIUS +” is
displayed while system operation is checked. When the system check is
complete, the normal screen will return.
When driving on snowy roads or in other bright environments
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding “” on the brightness control
button.
Pressing “” on the brightness control button or turning the “POWER” switch
off will cause the brightness level to revert to the original level.
Head-up display
The head-up display may seem dark and hard to see when viewed
through sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the head-up display is turned off, it will remain off even if the power
switch is turned to ON mode after the power switch has been turned off.
When the 12-volt battery is disconnected
The head-up display settings will be reset.
STEP 4

260 2-2. Instrument cluster
PRIUS +_OM_OM47821E_(EE)
CAUTION
Before using the head-up display
Check that the position and brightness of the head-up display image does
not interfere with safe driving. Incorrect adjustment of the image’s position or
brightness may obstruct the driver’s view and lead to an accident, resulting
in death or serious injury.
NOTICE
To prevent damage to the components
If an object falls into the opening of the
head-up display, remove it immediately.
Also, avoid spilling water or other liquids
near the head-up display opening as this
may cause mechanical damage.

280
2-4. Using other driving systems
PRIUS +_OM_OM47821E_(EE)
Dynamic radar cruise control
: If equipped
Dynamic radar cruise control supplements conventional cruise con-
trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle
distance control mode, the vehicle automatically accelerates or
decelerates in order to maintain a set following distance from vehi-
cles ahead.
Vehicle-to-vehicle distance
button
Indicators
Set speed
Display
Cruise control switch

282 2-4. Using other driving systems
PRIUS +_OM_OM47821E_(EE)
Adjusting the set speed
To change the set speed, operate the lever until the desired set
speed is displayed.
Increases the speed
Decreases the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the
lever in the desired direction.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
• When the set speed is shown in “km/h”
Fine adjustment: By approximately 5 km/h (3.1 mph) each time the
lever is operated
Large adjustment: By approximately 5 km/h (3.1 mph) for each
0.75 seconds the lever is held
• When the set speed is shown in “MPH”
Fine adjustment: By approximately 5 mph (8 km/h) each time the
lever is operated
Large adjustment: By approximately 5 mph (8 km/h) for each 0.75
seconds the lever is held
In the constant speed control mode (P. 287), the set speed will be
increased or decreased as follows:
Fine adjustment: By approximately 1.6 km/h (1 mph) each time the
lever is operated
Large adjustment: The set speed can be increased or decreased con-
tinually until the lever is released.