2012 TOYOTA LAND CRUISER mirror

29
L/C200_EE (OM60G38E)
D
: If equipped
Outside rear view mirror control switches P. 106
Headlight cleaner switch P. 232
Roll sensing of curtain shield
airbags off switch
P. 150
Odometer/trip meter display change button P. 204
Instrument cluster light control knob P. 206
Card holder P. 460
Toyota parking assist-sensor
switch
 P. 237
Center differential lock/unlock
switch
P. 259
VSC OFF switch P. 300
Heated steering wheel switch P. 474

1Before driving
37
L/C200_EE (OM60G38E)
1-1. Key information
Keys.................................... 38
1-2. Opening, closing and locking
the doors
Smart entry &
start system ...................... 40
Wireless remote control ...... 55
Side doors .......................... 60
Back door ........................... 63
1-3. Adjustable components
(seats, mirrors, steering
wheel)
Front seats.......................... 75
Rear seats .......................... 78
Driving position memory
system .............................. 86
Head restraints ................... 91
Seat belts............................ 95
Steering wheel .................. 101
Anti-glare inside
rear view mirror............... 104
Outside
rear view mirrors ............. 1061-4. Opening and closing
the windows and moon roof
Power windows ................. 109
Moon roof.......................... 113
1-5. Refueling
Opening
the fuel tank cap ............. 116
1-6. Theft deterrent system
Engine immobilizer
system ............................ 120
Double locking system ...... 125
Alarm ................................ 127
1-7. Safety information
Correct driving posture ..... 135
SRS airbags...................... 137
Child restraint systems ..... 151
Installing
child restraints ................ 160
Airbag manual
on-off system .................. 174

75
1
Before driving
L/C200_EE (OM60G38E)
1-3. Adjustable components (seats, mirrors, steering wheel)
Front seats
Manual seat
Seat position adjustment
lever
Seatback angle adjustment
lever
Vertical height adjustment
lever
*
Seat cushion (front) angle
adjustment knob
*
Lumbar support control
switch
*
*
: Driver’s side only2134
5
ITY13C003

76 1-3. Adjustable components (seats, mirrors, steering wheel)
L/C200_EE (OM60G38E)
Active head restraint
When the occupant’s lower back
presses against the seatback
during a rear-end collision, the
head restraint moves slightly for-
ward and upward to help reduce
the risk of whiplash on the seat
occupant.
Power seat
Seat position fore/aft control
switch
Seatback angle control
switch
Seat cushion (front) angle
control switch
Vertical height control
switch
Lumber support control
switch (driver’s side only)

77 1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
L/C200_EE (OM60G38E)
Active head restraint
Even small forces applied to the seatback may cause the head restraint to
move. Pushing up a locked head restraint forcibly may make the inner struc-
ture of the head restraint appear. This does not indicate a problem.
CAUTION
Seat adjustment
Be careful that the seat does not hit passengers or luggage.
Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, during an accident the lap belt may slide past the
hips and apply restraint forces directly to the abdomen or your neck may
contact the shoulder belt, increasing the risk of death or serious injury.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
After adjusting the seat, make sure that the seat is locked in position.
(manual seat only)
Inner structureDuring
rear-end
collision

78
1-3. Adjustable components (seats, mirrors, steering wheel)
L/C200_EE (OM60G38E)
Rear seats
Second seat
Seatback angle adjustment
lever
Seat position adjustment
lever
Third seat (if equipped)

79 1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
L/C200_EE (OM60G38E)
Tumbling the second seats and third seat entry
Vehicles with third seat: For easy access to the third seat, perform
in “Tumbling the second seats” (P. 8 0 ) .
Before tumbling the second seats
Stow the seat belt buckles and
lower the head restraints to the
lowest position.
Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.
This prevents the shoulder belt
from being damage.
Make sure that the seat belts are
removed from the hangers before
using them.
STEP1
STEP1
ITY13C013a
STEP2

80 1-3. Adjustable components (seats, mirrors, steering wheel)
L/C200_EE (OM60G38E)Tumbling the second seats
Fold down the seatback while
pulling the seatback angle
adjustment lever, and swing the
whole seat up and forward.
Hook the holding strap to the
assist grip and secure the seat
by pulling its free end.
When returning the second seat
to its original position, stow the
holding strap.
Remove the seat hook covers
from the back of the seat cush-
ion, and install them on the seat
hooks.
When returning the second seat
to its original position, remove the
seat hook covers from the floor
and install them in the back of the
seat cushion.
STEP1
STEP2
ITY13C025
STEP3