2012 TOYOTA IQ isofix

141 1-7. Safety information
1
Before driving
iQ_WE_74014E
Child restraint system suitability for various seating positions
(with ISOFIX rigid anchor) (vehicles with rear seats)
Provided information in the table shows your child restraint system
suitability for various seating positions.
Left-hand drive vehicles
Mass groups Size class FixtureVehicle ISOFIX
positions
Rear outside
LH RH
CarrycotF
ISO/L1XX
G
ISO/L2XX
(1) X X
Group 0
Up to 10 kg
(22 lb.)E
ISO/R1XIL*1
(1) X X
Group 0
+
Up to 13 kg
(28 lb.)E
ISO/R1XIL*1
DISO/R2XX
C
ISO/R3XX
(1) X X
Group I
9 to 18 kg
(20 to 39 lb.)D
ISO/R2XX
C
ISO/R3XX
B
ISO/F2IUF*2IUF*2, IL*1
B1ISO/F2XIUF*2IUF*2, IL*1
AISO/F3IUF*2IUF*2, IL*1
(1) X X
Group II
15 to 25 kg
(34 to 55 lb.)(1) X X
Group III
22 to 36 kg
(49 to 79 lb.)(1) X X

142 1-7. Safety information
iQ_WE_74014ERight-hand drive vehicles
Mass groups Size class FixtureVehicle ISOFIX
positions
Rear outside
LH RH
CarrycotF
ISO/L1XX
G
ISO/L2XX
(1) X X
Group 0
Up to 10 kg
(22 lb.)E
ISO/R1IL*1X
(1) X X
Group 0
+
Up to 13 kg
(28 lb.)E
ISO/R1IL*1X
D
ISO/R2XX
C
ISO/R3XX
(1) X X
Group I
9 to 18 kg
(20 to 39 lb.)D
ISO/R2XX
C
ISO/R3XX
B
ISO/F2IUF*2, IL*1IUF*2
B1ISO/F2XIUF*2, IL*1IUF*2
AISO/F3IUF*2, IL*1IUF*2
(1) X X
Group II
15 to 25 kg
(34 to 55 lb.)(1) X X
Group III
22 to 36 kg
(49 to 79 lb.)(1) X X

143 1-7. Safety information
1
Before driving
iQ_WE_74014E(1) For the child restraint system (CRS) which do not carry the ISO/
XX size class identification (A to G), for the applicable mass
group, the car manufacturer shall indicate the vehicle specific
ISOFIX child restraint system(s) recommended for each position
Key of letters inserted in the above table:
IUF: Suitable for ISOFIX forward-facing child restraint systems of uni-
versal category approved for use in this mass group
IL: It is suitable for child restraint system shown in the ISOFIX child
restraint system list.
X: ISOFIX position not suitable for ISOFIX child restraint systems
in this mass group and/or this size class.
*1: When installing the ISOFIX child restraint system, set the front
seat at front-most and upright position.
*2: When installing the ISOFIX child restraint system on the rear
seat, adjust the front seat position so that the seat rails are com-
pletely covered by the covers bearing a triangle mark.
Cover
Triangle mark
Seat rail
Slide the front seat forward until
the seat rail is no longer visible,
when the cover triangle section
is viewed from above.

144 1-7. Safety information
iQ_WE_74014EWhen installing the child restraint system, also refer to the child
restraint system instruction manual.
Other child restraint systems different from the systems mentioned in
the table can be used, but the suitability of the systems must be care-
fully checked with the child restraint system manufacturer and
retailer.
ISOFIX child restraint system list
Mass groups Size classFixtureName Category
0
Up to 10 kg
(22 lb.)
(0 - 9 months)E
ISO/R1TOYOTA MINIsemi-
universal
E
ISO/R1TOYOTA MIDIsemi-
universal
0
+
Up to 13 kg
(28 lb.)
(0 - 2 years)EISO/R1TOYOTA MINIsemi-
universal
E
ISO/R1TOYOTA MIDIsemi-
universal
I
9 to 18 kg
(20 to 39 lb.)
(9 months -
4 years)B
ISO/F2TOYOTA MIDIsemi-
universal
B1
ISO/F2XTOYOTA MIDIsemi-
universal
A
ISO/F3TOYOTA MIDIsemi-
universal

148
1-7. Safety information
iQ_WE_74014E
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure child restraints to the seats using a seat belt or ISOFIX rigid
anchors. Attach the top strap when installing a child restraint.
An ELR belt requires a locking
clip to install a child restraint
system.
Vehicles with rear seat: ISOFIX
rigid anchors (ISOFIX child
restraint system)
These exclusive fixing bars are
provided for the rear seats.
(Tags displaying the location of
the ISOFIX rigid anchors are
attached to the seats.)

154 1-7. Safety information
iQ_WE_74014E
Removing a child restraint installed with a seat belt
Press the release button and
fully retract the seat belt.
Installation with ISOFIX rigid anchor (ISOFIX child restraint
system) (vehicles with rear seat)
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the seat.
The bars are installed in the
clearance between the seat cush-
ion and seatback.
If the child restraint has a top
strap, the top strap should be
latched onto the anchor bracket.

155 1-7. Safety information
1
Before driving
iQ_WE_74014E
Child restraint systems with a top strap (vehicles with rear seat)
Secure the child restraint using a seat belt or ISOFIX rigid
anchors.
Remove the anchor bracket
cover.
Store the removed cover in a safe
place.
Latch the hook onto the anchor bracket and tighten the top
strap.
Make sure the top strap is securely latched. Make sure head
restraint is mounted.
Type A
Type B

158 1-7. Safety information
iQ_WE_74014E
CAUTION
When installing a child restraint system
When a junior seat is installed, always ensure that the shoulder belt is
positioned across the center of the child’s shoulder. The belt should be
kept away from the child’s neck, but not so that it could fall off the child’s
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
Ensure that the belt and tab are securely locked and the seat belt is not
twisted.
Push and pull the child seat in different directions to be sure it is secure.
Follow all installation instructions provided by the child restraint system
manufacturer.
Always remove the locking clip when the child restraint system is not
installed.
To correctly attach a child restraint system to the ISOFIX rigid anchors
When using the ISOFIX rigid anchors, be sure that there are no foreign
objects around the ISOFIX rigid anchors and that the seat belt is not caught
behind the child restraint. Make sure the child restraint system is securely
attached, or it may cause death or serious injury to the child or other passen-
gers in the event of a sudden stop, sudden swerve or an accident.