2012 TOYOTA HILUX lock

523 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)Passenger’s side instrument panel
FuseAmpereCircuit
1MIR-HTR15 AOutside rear view mirror defoggers
24WD20 ARear differential lock system, ABS,
TRC and VSC
3S-HTR15 ASeat heaters
4DEF20 A
Rear window defogger and multi-
port fuel injection system/sequential
multiport fuel injection system
5DOOR25 APower door lock system and power
windows
6PWR30 APower windows
ITI43I094

529 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)Partly remove the fender liner
and turn the bulb base counter-
clockwise.
Unplug the connector while
pressing the lock release.
STEP2
Bumper
Fender
liner
ITO43P165
STEP3

531 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)Partly remove the fender liner
and turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP2
Bumper
Fender
liner
STEP3

533 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)Partly remove the fender liner
and turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP2
Bumper
Fender
liner
ITO43P144
STEP3

534 4-3. Do-it-yourself maintenance
HILUX_EE (OM0K132E)Side turn signal lights (fender-mounted type) (if equipped)
Remove the unit.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
Front
STEP2
STEP3

535 4-3. Do-it-yourself maintenance
4
Maintenance and care
HILUX_EE (OM0K132E)Stop/tail lights, rear turn signal lights, back-up lights and rear
fog light
Remove the securing bolts and
remove the unit.
Turn the bulb base counterclock-
wise.
Stop/tail light
Rear turn signal light
Back-up light or rear fog light
Remove the light bulb.
Stop/tail light
Rear turn signal light
Back-up light or rear fog light
STEP1
STEP2
STEP3

536 4-3. Do-it-yourself maintenance
HILUX_EE (OM0K132E)License plate lights
Remove the unit.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
STEP2
STEP3

538 4-3. Do-it-yourself maintenance
HILUX_EE (OM0K132E)
CAUTION
Replacing light bulbs
Turn off the lights. Do not attempt to replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
To prevent damage or fire
Make sure bulbs are fully seated and locked.
Check the wattage of the bulb before installing to prevent heat damage.