2012 SUZUKI GRAND VITARA Transmission

[x] Cancel search: Transmission

Page 246 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 6-9VEHICLE LOADING AND TOWING
79K21-03E
7) Release the parking brake.
Stop towing the vehicle every 300 km (200
miles). Start the engine. With the manual
transmission lever in 2nd gear (or the auto-
m

Page 247 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 6-10
VEHICLE LOADING AND TOWING
79K21-03E
4WD Vehicle Without a Transfer 
Switch
54G586
54G58564J234
You cannot tow your vehicle behind
another vehicle using recreational towing
methods.
2WD Vehicle1)

Page 249 of 337

SUZUKI GRAND VITARA 2012  Owners Manual INSPECTION AND MAINTENANCE
7
79K21-03E
60G410
INSPECTION AND MAINTENANCEMaintenance Schedule  ....................................................... 7-2
Periodic Maintenance Schedule  ...............

Page 250 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-1INSPECTION AND MAINTENANCE
79K21-03E
60A187S
WARNING
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be espe-
ci

Page 254 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-5INSPECTION AND MAINTENANCE
79K21-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by
odometer reading or months, whiche

Page 255 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-6
INSPECTION AND MAINTENANCE
79K21-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 256 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-7INSPECTION AND MAINTENANCE
79K21-03E
Maintenance Recommended under Severe Driving ConditionsIf the vehicle is usually used under the conditions corresponding to any severe condition code given belo

Page 257 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-8
INSPECTION AND MAINTENANCE
79K21-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect