2012 SUBARU TRIBECA Navigation Manual

56
Route preferencesUse this function to specify preferred route search conditions. The system will start recalculating the route
according to your specified conditions.
1
Specify conditions by selecting keys. Each time you select a key, it will toggle between “usage” and “non-usage” of the
corresponding roads or ferries.
2
Select (calculate).
NOTE• The (calculate) key can be selected during route guidance.
• The route calculation will not always be able to follow the specified conditions.
Route Options
Press the button or select , then select (route options), and then select
(route preferences).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 56

57
Route Options
Destination and waypointsYou can change the destination or waypoints for the route calculation by using this function.
■Addition of waypoints Use the following procedure to add new waypoints to the current route for recalculation.1
Select (add).
2
Set a waypoint using any method available from the screen.
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 57

58
3
Specify the order in which all the set waypoints are to be visited.Choose the location of the waypoint to be added, and then select (add).
4
Select (calculate).
NOTE• When a new destination is set using (destination), it will replace the current destination and the route calculation will be carried
out again.
• Step 3 must be performed for the second and any subsequent waypoints.
• Repeat Steps 1 to 3 for each waypoint to be set.
Route Options
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 58

59
Route Options
■Modifying destination or waypoint positionsUse this procedure to modify the destination or waypoint positions. The screen will display the calculated route and
the positions of the destination or waypoints that you will be able to modify.1
Select (list).
2
Select (change location).
3
Select the key corresponding to the location that is to be modified.The map for the area around your current location will be displayed.
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 59

60
4
Scroll the map to bring the crosshair to the location and then select
.
5
Select (calculate).
Route Options
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 60

61
Route Options
■Modifying visiting orderYou can change the order for visiting your waypoints by using this procedure.1
Select (list).
2
Select the waypoint keys according to the order of your visit.If you wish to cancel the visiting order number indication, select (undo).
3
When you complete the sequencing, the visiting order will be updated
automatically.
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 61

62
4
Select .
5
Select (calculate).
Route Options
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 62

63
Route Options
■Deleting destination or waypointsUse this procedure when you wish to delete the previously set destination or waypoint.1
Select (delete).
2
Select the key corresponding to the destination or waypoint you wish
to delete.
3
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
4
Select (calculate).
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 63