Black plate (224,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-40
Audio
First menu Second menu Third menu DetailsPage
SETUP SECURITY SET PINSetting a PIN code 5-46
PHBK LOCK* Locking the phonebook 5-46
PHBK UNLOCK* Unlocking the phonebook 5-46
GO BACK
PHONE SETUP PAIR PHONE Registering a new cell phone 5-38
SELECT PHONE Selecting a cell phone to be used 5-47
CHANGE NAME Changing the registered name of the cell phone 5-47
LIST PHONES Showing the list of the registered cell phones 5-47
SET PASSKEY Changing the pass key 5-48
DELETE Deleting the registered cell phone 5-48
GO BACK
SYSTEM SETUP GUIDANCE VOL Setting the volume of the voice guidance 5-48
INITIALIZE Initialization 5-48
SEL LANGUAGE Selecting the language (using the Hands-free system) 5-48
GO BACK
GO BACK —
*: If a PIN code is not registered, the menu described in the chart is not available.
Black plate (232,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-48
Audio
! Setting passkey
1. Select the “SET PASSKEY ”menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by performing
either of the following procedures. –Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the passkey.
3. Select the “CONFIRM”menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the “PHONE SETUP ”
mode.
! Deleting registered cell phone from
the list
1. Select the “DELETE”menu.
2. Select a cell phone to be deleted by
performing either of the following proce-
dures. –Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switchand say
the voice tag.
3. Select the “CONFIRM”menu.
–“ DELETED” is displayed, the data is
deleted and the mode changes to the
“PHONE SETUP ”mode. !
System setup
After selecting the “SYSTEM SETUP ”
menu, perform the following procedure.
Select the following menus by operating
the “TUNE/TRACK/CH ”dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select the “GUIDANCE VOL ”menu.
2. Set the guidance volume by operating
the “TUNE/TRACK/CH ”dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select the “INITIALIZE”menu.
2. Select the “CONFIRM”menu.
– First “PLEASE WAIT ”, then“INITI-
ALIZED ”is displayed. The registered
data is initialized and the mode
changes to the last mode.
! Selecting language
To select the language, perform the
following procedure.
1. Select the “SEL LANGUAGE ”menu.
2. Select the desired language by oper-
ating the “TUNE/TRACK/CH ”dial.
