2012 RENAULT PULSE buttons


> (GLW    0RGHO .$2(0B5HQDXOW @
Call lists:
A number from the dialled, received, or missed call lists
can also be used to ma\fe a call.
.Dialled calls
Use the dialled call mode to ma\fe a call \bhich is
based on the list of outgoing (dialled) calls.
. Received calls
Use the received call mode to ma\fe a call \bhich is
based on the list of received calls.
. Missed calls
Use the missed call mode to ma\fe a call \bhich is
based on the list of missed calls.
1. Push the
button, and select “Call Lists”.
2. Turn the TUNE/MENU/ENTER dial to scroll to an item, and push the TUNE/MENU/ENTER dial to
select it.
3. Scroll to the preferred phone number and then push the TUNE/MENU/ENTER dial, or push the
button to dial the number.
Receiving a call
When receiving an incoming call, the display \bill sho\b
the caller’s phone number (or a notification message
that the caller’s phone number cannot be sho\bn): .
Ans\ber the call by pushing the
button briefly,
or push the TUNE/MENU/ENTER dial.
. End the call, after the conversation, by:
— Pushing the
button briefly again.
— Pushing the TUNE/MENU/ENTER dial \bhen the “
” symbol is highlighted.
If “” is not highlighted, turn the TUNE/
MENU/ENTER dial to select “”, and push
the TUNE/MENU/ENTER dial.
. Reject the call by selecting the “
” symbol on
the screen using the TUNE/MENU/ENTER dial
and pushing the TUNE/MENU/ENTER dial to
select it.
During a call:
During a call, by scrolling and pushing the TUNE/
MENU/ENTER dial, you can select the follo\bing
options:
. “
” — Use this item to enter numbers during a
call. For example, if directed by an automated
phone system to dial an extension number the
system \bill send the tone associated \bith the
selected number.
. “
” — Use this item (the transfer handset
command) to transfer the call from the audio
system to your cellular phone.
To transfer the call bac\f to hands-free via the
audio system, select “
”.
Steering \bheel s\bitch for hands-free phone
(if equipped)
JVH0929X
1. Volume control buttons
2. Phone end
button
3. Phone send
button
The hands-free mode can be operated using the
controls on the steering \bheel.
Volume control buttons:
The volume control buttons allo\b you to adjust the
volume of the spea\fers by pushing the + or - button.
Phone send/end button:
The
andbuttons can be used as follo\bs.
. Push the
button to accept an incoming call.
. Push the
button to reject an incoming call.
. Push the
button to end an active call.
Heater and air conditioner, and audio system4-65
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
JVM0105X
To replace the battery\f
1. Remo\be the screw
*A.
2. Insert a small screwdri\ber into the slit of the corner
*Band twist it to separate the upper part from
the lower part. Use a cloth to protect the casing.
3. Replace the battery with a new one.
Recommended battery\f CR1620 or equi\balent
.Do not touch the internal circuit and electricterminals as doing so could cause a malfunc-
tion.
.Make sure that the + side faces the bottom ofthe case*C.
4. Close the lid and install the screw securely.
5. Operate the buttons to check its operation.
See a RENAULT dealer if you need assistance for
replacement.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
INTELLIGENT KEY BATTERY
Battery replacement
CAUTION:
. Be careful not to allow children to swallow
the battery and removed parts.
. An improperly disposed battery can harm
the environment. Always confirm local reg-
ulations for battery disposal.
. When changing batteries, do not let dust or
oil get on the components.
. There is danger of explosion if lithium
battery is incorrectly replaced. Replace only
with the same or equivalent type.
SDI2451
To replace the battery\f
1. Release the lock knob at the back of the Intelligent
Key and remo\be the mechanical key.
2. Insert a small screwdri\ber into the slit of the corner and twist it to separate the upper part from the
lower part. Use a cloth to protect the casing.
3. Replace the battery with a new one.
.Recommended battery\f CR2025 or equi\balent.Do not touch the internal circuit and electric terminals as doing so could cause a malfunc-
tion.
Maintenance and do-it-yourself8-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-26Maintenance and do-it-yourself
.Make sure that the+side faces the botto\f of
the case.
SD\b2452
4. Align the tips of the upper and lower parts*1,
and then push the\f together until it is securely
closed
*2.
5. Operate the buttons to check its operation.
See a RENAULT dealer if you need assistance for
replace\fent.
CAUTION:
. Do not ground accessories directly to the
battery terminal. Doing so will bypass the
variable voltage control system and the
vehicle battery may not charge completely.
. Use electrical accessories with the engine
running to avoid discharging the vehicle
battery.
Your vehicle is equipped with a variable voltage control
syste\f. This syste\f \feasures the a\fount of electrical
discharge fro\f the battery and controls voltage
generated by the alternator.
ENG\bNE COMPARTMENT
SD\b2575
For checking and/or replacing, see a RENAULT dealer.
Fusible links
\bf any electrical equip\fent does not operate and the
fuses are in good condition, check the fusible links. \bf
any of these fusible links are \felted, replace only with
genuine RENAULT parts.
VARIABLE VOLTAGE CONTROL
SYSTEM (if equipped) FUSES
&RQGLWLRQ