2012 RENAULT PULSE ECU


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-18Pre-driving checks and adjustments
WARNING:
.The hood must be closed and latched
securely before driving. Failure to do so
could cause the hood to fly open and result
in an accident.
. Never open the hood if steam or smoke is
coming from the engine compartment to
avoid injury.
OPENING HOOD
JVP0090X
1. Pu\f\f the h\b\bd \f\bck re\fease hand\fe*1\f\bcated
be\f\bw the instrument pane\f unti\f the h\b\bd springs
up.
2. L\bcate the \fever
*2in between the h\b\bd and
gri\f\fe and push the \fever sideways with y\bur
fingertips.
3. Raise the h\b\bd
*3.
4. Rem\bve the supp\brt r\bd
*4and insert it int\b the
s\f\bt*5.
Hold the coated parts
*Awhen removing or
resetting the support rod. Avoid direct contact
with the metal parts, as they may be hot
immediately after the engine has been stopped.
CLOSING HOOD
1. Whi\fe supp\brting the h\b\bd, return the supp\brt r\bd t\b its \brigina\f p\bsiti\bn.
2. S\f\bw\fy \f\bwer the h\b\bd t\b ab\but 20 t\b 30 cm (8 t\b 12 in) ab\bve the h\b\bd \f\bck, then \fet it dr\bp.
3. Make sure it is secure\fy \fatched.
CAUTION:
Before closing the hood, be sure to release the
support rod and store it in position. Otherwise,
the support rod will be damaged.
HOOD
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
Make sure the back door has been closed
securely to prevent it from opening while driving.
Do not drive with the back door open. This could
allow dangerous exhaust gases to be drawn into
the vehicle.
OPENING BACK DOOR
JVP0091X
F\fr m\fd\bl with th\b d\f\fr k\by cylind\br
Th\b back d\f\fr can b\b \fp\bn\bd by pulling th\b \fp\bn\br
handl\b and pulling up th\b back d\f\fr.
T\f cl\fs\b th\b back d\f\fr, pull d\fwn until it s\bcur\bly
l\fcks.
F\fr m\fd\bl with\fut th\b d\f\fr k\by cylind\br
T\f \fp\bn th\b back d\f\fr, unl\fck it with \fn\b \ff th\b
f\fll\fwing \fp\brati\fns, th\bn pull th\b handl\b.
.Push th\b back d\f\fr r\bqu\bst switch (if \bquipp\bd) .
(S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-9) .)
. Push th\b “UNLOCK” butt\fn \fn th\b Int\bllig\bnt K\by
(if \bquipp\bd) . (S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-
9) .) .
Push th\b “UNLOCK” butt\fn \fn th\b r\bm\ft\b
c\fntr\fll\br (if \bquipp\bd) . (S\b\b “R\bm\ft\b k\byl\bss
\bntry syst\bm” (P.3-7) .)
. Push th\b p\fw\br d\f\fr l\fck switch t\f th\b “UN-
LOCK” p\fsiti\fn.
L\fcking with k\by (f\fr m\fd\bl with th\b d\f\fr k\by
cylind\br)
JVP0096X
T\f l\fck th\b back d\f\fr, push it d\fwn firmly, ins\brt th\b
k\by t\f th\b d\f\fr k\by cylind\br and turn th\b k\by cl\fckwis\b
*1. T\f unl\fck th\b back d\f\fr, turn th\b k\by c\funt\br-
cl\fckwis\b*2.
WARNING:
. Fuel is extremely flammable and highly
explosive under certain conditions. You
could be burned or seriously injured if it is
misused or mishandled. Always stop the
engine and do not smoke or allow open
flames or sparks near the vehicle when
refueling.
. Fuel may be under pressure. Turn the cap a
half of a turn, and wait for any “hissing”
sound to stop to prevent fuel from spraying
out and possibly causing personal injury.
Then remove the cap.
. Use only an original equipment type fuel
filler cap as a replacement. It has a built-in
safety valve needed for proper operation of
the fuel system and emission control sys-
tem. An incorrect cap can result in a serious
malfunction and possible injury.
OPENING FUEL FILLER LID
SPA2336
T\f \fp\bn th\b fu\bl fill\br lid, pull th\b fu\bl fill\br lid r\bl\bas\b
handl\b.
Pre-driving checks and adjustments3-19
BACK DOOR
FUEL FILLER LID
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Normal operation ..................\c..................\c..........................\c.............. 5-38
Vehicle \fecurity ..................\c..................\c..........................\c..................\c..... 5-38
Col\b weather \briving ..................\c..................\c..................\c..................... 5-38 Battery ..................\c..................\c..................\c..................\c..................\c..... 5-39
Engine coolant ..................\c..................\c.....................\c..................\c..... 5-39 Tire equipment ..................\c..................\c...............................\c.......... 5-39
Special winter equipment ..................\c..................\c..................\c.... 5-39
Parking brake ..................\c..................\c.....................\c..................\c..... 5-39
Corro\fion protection ..................\c..................\c.....................\c.......... 5-39
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
During the first 1,600 km (1,000 miles\f , follow these
recommen\bations to obtain maximum engine perfor-
mance an\b ensure the future reliability an\b economy of
your new vehicle. Failure to follow these recommen\ba-
tions may result in shortene\b engine life an\b re\buce\b
engine performance.
.Do not \brive at a constant spee\b, either fast or
slow, for long perio\bs of time.
. Do not run the engine over 4,000 rpm (HR12 or
HR15 engine\f or 2,500 rpm (K9K engine\f .
. Do not accelerate at full throttle in any gear.
. Do not start quickly.
. Do not brake har\b as much as possible.WARNING:
The driving characteristics of your vehicle will
change remarkably by any additional load and
its distribution, as well as by adding optional
equipment (trailer coupling, roof racks, etc.) .
Your driving style and speed must be adjusted
according to the circumstances. Especially when
carrying heavy loads, your speed must be
reduced adequately.
.Make sure the area aroun\b the vehicle is clear.
. Visually inspect tires for their appearance an\b
con\bition. Measure an\b check the tire pressure for
proper inflation.
. Check that all win\bows an\b lights are clean.
. A\bjust the seat an\b hea\b restraint positions.
. A\bjust the insi\be an\b outsi\be rearview mirror
positions.
. Fasten your seat belt an\b ask all passengers to \bo
the same.
. Check that all \boors are close\b.
. Check the operation of the warning lights when
the ignition switch is turne\b to the “ON” position.
. Maintenance items in the “8. Maintenance an\b \bo-
it-yourself” section shoul\b be checke\b perio\bi-
cally.
WARNING:
.Never leave children or adults who would
normally require the support of others alone
in your vehicle. Pets should not be left alone
either. They could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal illness to people or
animals.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks. In a sudden
stop or collision, unsecured luggage could
cause personal injury.
EXHAUST GAS (carbon monoxi\be\f
WARNING:
.Do not breathe exhaust gas; it contains
colorless and odorless carbon monoxide.
Carbon monoxide is dangerous. It can cause
unconsciousness or death.
. If you suspect that exhaust fumes are
entering the vehicle, drive with all windows
fully open, and have the vehicle inspected
immediately.
. Do not run the engine in closed spaces such
as a garage.
. Do not park the vehicle with the engine
running for an extended period of time.
Starting and driving5-3
BREAK-IN SCHEDULE
BEFORE STARTING ENGINE PRECAUTIONS WHEN STARTING
AND DRIVING
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
5-6Starting and driving
SSD0503Type BThe ignition switch incl\fdes a device that hel\bs
\brevent accidental removal of the key while driving.
The key can only be removed when the ignition switch
is in the “LOCK” \bosition.
Ty\be B: To t\frn the ignition switch to the “LOCK”
\bosition from the “ACC” or “ON” \bosition, t\frn the key
to the “OFF” \bosition, \b\fsh the key in, then t\frn the key
to the “LOCK” \bosition.
The “OFF” \bosition
*1is between the “LOCK” and
“ACC” \bositions, altho\fgh it is not labeled on the
ignition switch.
STEERING LOCK
To lock steering wheel
1. T\frn the ignition switch to the “LOCK” \bosition.
2. Remove the key.
3. T\frn the steering wheel 1/6 of a t\frn clockwise from the straight \f\b \bosition.
To \fnlock steering wheel
1. Insert the key into the ignition switch.
2. Gently t\frn the ignition switch while rotating thesteering wheel slightly right and left.
KEY POSITIONS
LOCK (0)
The ignition key can only be removed at this \bosition.
The steering lock can only be locked at this \bosition.
OFF (1)
The engine is t\frned off with the steering wheel
\fnlocked.
ACC (2)
The electrical accessory \bower activates witho\ft the
engine t\frned on.
ON (3)
The ignition system and the electrical accessory \bower
activate witho\ft the engine t\frned on.
START (4)
The engine starter activates and the engine will start.
The ignition switch, when released, will a\ftomatically
t\frn to the “ON” \bosition.
CAUTION:
As soon as the engine has started, release the
ignition switch immediately.
PRECAUTIONS ON PUSH-BUTTON IGNI-
TION SWITCH OPERATION
WARNING:
Do not operate the push-button ignition switch
while driving the vehicle except in an emergency.
(The engine will stop when the ignition switch is
pushed 3 consecutive times or the ignition
switch is pushed and held for more than 2
seconds.) The steering wheel will lock and could
cause the driver to lose control of the vehicle.
This could result in serious vehicle damage or
personal injury.
Before o\berating the \b\fsh-b\ftton ignition switch, be
s\fre to move the selector lever to the “P” (Park)
\bosition (for A\ftomatic Transmission/Contin\f\lo\fsly
Variable Transmission model) or the shift lever to the
“N” (Ne\ftral) \bosition (for Man\fal Transmission model) .
INTELLIGENT KEY SYSTEM
The Intelligent Key system can o\berate the ignition
switch witho\ft taking the key o\ft from yo\fr \bocket or
bag. The o\berating environment and/or conditions may
affect the Intelligent Key system o\beration. Some
indicators and warnings for o\beration are dis\blayed
on the vehicle information dis\blay (if eq\fi\b\bed) and/or
in the meter. (See “Vehicle information dis\blay” (P.2-
20) and "Warning/indicator lights and a\fdible remin-
ders".)
CAUTION:
.Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key inside the
vehicle when you leave the vehicle.
PUSH-BUTTON IGNITION SWITCH
(model with Intelligent Key system)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SSD0891
1. RES/+ switch
2. SET/íswitch
\f. CANCE\b switch
4. Cruise control MAIN switch (For details, see “Cruise control” (P.5-28) .)
5. Speed limiter MAIN switch (When this switch is pushed, the speed limiter
enters the standby mode. If the cruise control
system is on, the system will turn off and the
speed limiter enters the standby mode.)
Speed limiter display and indicators (Type B
model)
JVS0019X
The speed limiter operating condition is shown on the
vehicle information display and instrument panel.
Vehicle information display:1. \bIMIT indicator
2. Set speed indicator
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
Instrument panel: \f. Speed limiter indicator light
4. SET indicator light
The speed limiter will not automatically brake
the vehicle to the set speed limit.
Speed limiter display and indicators (Type C
model)
JVS0025X
The speed limiter operating condition is shown on the
vehicle information display and instrument panel. Vehicle information display:
1. \bIMIT indicator
2. SET indicator light
\f. Set speed indicator
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
Instrument panel: 4. Speed limiter indicator light
The speed limiter will not automatically brake
the vehicle to the set speed limit.
Turning on speed limiter
Push the speed limiter MAIN switch. The speed limiter
indicator (light) and the \bIMIT indicators illuminate. The
set speed indicator shows “- - -”.
Setting speed limit
1. Push the SET/í switch..When the vehicle is stopped, the speed will be
set at \f0 km/h or 20 MPH.
.While driving, the speed limit will be set at thecurrent speed.
2. When the speed limit is set, the SET (indicator light) and the set speed indicators illuminate on
the vehicle information display and instrument
panel (for Type B model) .
Changing set speed limit:
Use either of the following operations to change the
speed limit.
. Push and hold the RES/+ or SET/í switch. The
set speed will increase or decrease by approxi-
mately 10 km/h or 10 MPH.
Starting and driving5-27
&RQGLWLRQ