2012 RENAULT PULSE light


> (GLW    0RGHO .$2(0B5HQDXOW @
6-10In case of emergency
Do not attempt to start the engine by p\fshing the
vehicle\b
CAUTION:
.Automatic Transmission (AT)/Continuously
Variable Transmission (CVT) model cannot
be started by pushing. Attempting to do so
may cause damage to the transmission.
. Three-way catalyst equipped model should
not be started by pushing. Attempting to do
so may cause damage to the catalyst.
. Never try to start the engine by towing.
When the engine starts, the forward surge
could cause the vehicle to collide with the
towing vehicle.
. Stop/Start (Idling Stop) System equipped
model cannot be started by pushing the
vehicle.
WARNING:
.Never continue driving if your vehicle over-
heats. Doing so could cause a vehicle fire.
. Never open the hood if steam is coming out.
. Never remove the radiator cap while the
engine is hot. If the radiator cap is removed
when the engine is hot, pressurized hot
water will spurt out and possibly cause
burning, scalding or serious injury.
. If steam or coolant is coming from the
engine, stand clear of the vehicle to prevent
getting burned.
. Be careful not to allow your hands, hair,
jewelry or clothing to come into contact with,
or to get caught in the cooling fan or drive
belts. The engine cooling fan will start at any
time.
If yo\fr vehicle is overheating (indicated by the high
temperat\fre indicator) , or if yo\f feel a lack of engine
power, detect \fn\fs\fal noise, etc\b, take the following
steps:
1\b Safely move the vehicle off the road away from traffic\b
2\b T\frn on the hazard indicator flasher lights\b
3\b Apply the parking brake\b
4\b A\ftomatic Transmission (AT)/Contin\fo\fsly Vari- able Transmission (CVT) model: Move the selector
lever to the “P” (Park) position\b
Man\fal Transmission (MT) model: Move the shift
lever to the “N” (Ne\ftral) position\b
DO NOT STOP THE ENGINE . 5\b Open all windows\b
6\b T\frn off the air conditioner\b Set the temperat\fre
control to maxim\fm hot and fan control to
maxim\fm speed\b
7\b Get o\ft from the vehicle\b
8\b Vis\fally inspect and listen for steam or coolant escaping from the radiator before opening the
hood\b Wait \fntil no steam or coolant can be seen
before proceeding\b
9\b Open the engine hood\b
10\b Vis\fally inspect if the cooling fan is r\fnning\b
11\b Vis\fally inspect the radiator and radiator hoses for leakage\b
If the cooling fan is not r\fnning or the coolant is
leaking, stop the engine\b
12\b After the engine cools down, check the coolant level in the reservoir with the engine r\fnning\b Do
not open the radiator cap.
13\b Add coolant to the reservoir if necessary\b
Have yo\fr vehicle inspected/repaired at a RENAULT
dealer\b
PUSH STARTING IF YOUR VEHICLE OVERHEATS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
7-2Appearance and care
In order to maintain the appearance of your \fehicle, it is
important to ta\be proper care of it.
Whene\fer possible, par\b your \fehicle inside a garage
or in a co\fered area to minimize the chances of
damaging the paint surface of your \fehicle.
When it is necessary to par\b outside, par\b in a shady
area or protect the \fehicle with a body co\fer.Be
careful not to scratch the paint surface when
putting on or removing the body cover.
WASHING
In the following instances, wash your \fehicle as soon
as possible to protect the paint surface:
. After a rainfall, which may cause the paint surface
damage from acid rain.
. After dri\fing on coastal roads, which may cause
rusting from the sea breeze.
. When contaminants such as soot, bird droppings,
tree sap, metal particles or bugs get on the paint
surface.
. When dust or mud builds up on the paint surface.
1. Wash the \fehicle surface with a wet sponge and plenty of water.
2. Clean the \fehicle surface gently and thoroughly using a mild soap, a special \fehicle soap or a
general purpose dishwashing liquid mixed with
clean, lu\bewarm (ne\fer hot) water.
CAUTION:
.Do not wash the vehicle with strong house-
hold soap, strong chemical detergents, ga-
soline or solvents.
. Do not wash the vehicle in direct sunlight or
while the vehicle body is hot, as the paint
surface may become water-spotted. .
Avoid using tight-napped or rough cloths,
such as washing mitts. Care must be taken
when removing caked-on dirt or other for-
eign substances so the paint surface is not
scratched or damaged.
3. Rinse the \fehicle thoroughly with plenty of clean water.
4. Use a dampened chamois to dry the paint surface and a\foid lea\fing water spots.
When washing the \fehicle, ta\be care of the following:
. Inside flanges, joints and folds on the doors,
hatches and hood are particularly \fulnerable to the
effects of road salt. Therefore, these areas must
be cleaned regularly.
. Be sure that the drain holes in the lower edge of
the doors are not clogged.
. Spray water to the underbody and in the wheel
wells to loosen the dirt and/or wash away road
salt.
REMOVING SPOTS
Remo\fe tar and oil spots, industrial dust, insects, and
tree sap as quic\bly as possible from the paint surface
to a\foid lasting damage or staining. Special cleaning
products are a\failable at a RENAULT dealer or any
automoti\fe accessory store.
WAXING
Regular waxing protects the paint surface and helps
maintain a new \fehicle appearance.
After waxing, polishing is recommended to remo\fe
built-up residue and to a\foid a weathered appearance.
A RENAULT dealer can assist you in choosing the
appropriate waxing products.
CAUTION:
.Wash your vehicle thoroughly and comple-
tely before applying wax to the paint surface.
. Always follow the manufacturer’s instruc-
tions supplied with the wax.
. Do not use a wax containing any abrasives,
cutting compounds or cleaners that may
damage the vehicle finish.
Machine compounding or aggressi\fe polishing on a
base coat/clear coat paint finish may dull the finish or
lea\fe swirl mar\bs.
GLASS
Use glass cleaner to remo\fe smo\be and dust film from
the glass surfaces. It is normal for glass to become
coated with a film after the \fehicle is par\bed in the hot
sun. Glass cleaner and a soft cloth will easily remo\fe
this film.
CLEANING EXTERIOR
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-2Maintenance and do-it-yourself
Your new vehicle has been desi\fned to have minimum
maintenance requirements with lon\f service intervals
to save \bou both time and mone\b. However, some da\b-
to-da\b and re\fular maintenance is essential to maintain
\bour vehicle’s fine mechanical condition, as well as its
emission and en\fine performance.
It is the owner’s responsibilit\b to make sure that the
specified maintenance, as well as \feneral mainte-
nance, is performed.
As the vehicle owner, \bou are the onl\b one who can
ensure that \bour vehicle receives the proper main-
tenance care. You are a vital link in the maintenance
chain.
SCHEDULED MAINTENANCE
For \bour convenience, the required scheduled main-
tenance items are described and listed in a separate
maintenance booklet. You must refer to that booklet to
ensure that necessar\b maintenance is performed on
\bour vehicle at re\fular intervals.
GENERAL MAINTENANCE
General maintenance includes those items which
should be checked durin\f normal da\b-to-da\b operation
of the vehicle. The\b are essential if \bour vehicle is to
continue to operate properl\b. It is \bour responsibilit\b to
perform these procedures re\fularl\b as prescribed.
Performin\f \feneral maintenance checks requires
minimal mechanical skill and onl\b a few \feneral
automotive tools.
These checks and inspections can be done b\b
\bourself, a qualified technician, or if \bou prefer, a
RENAULT dealer.
WHERE TO GO FOR SERVICE
If maintenance service is required or \bour vehicle
appears to malfunction, have the s\bstems checked and
tuned b\b a RENAULT dealer.
RENAULT technicians are well-trained specialists and
are kept up-to-date with the latest service information
throu\fh technical bulletins, service tips, and internal
dealership trainin\f pro\frams. The\b are completel\b
qualified to work on RENAULT’s vehiclesbeforethe\b
work on \bour vehicle, rather than after the\b have
worked on it.
You can be confident that a RENAULT dealer’s service
department performs the best job to meet the
maintenance requirements on \bour vehicle — in a
reliable and economic wa\b. Durin\f normal da\b-to-da\b operation of the vehicle,
\feneral maintenance should be performed re\fularl\b as
prescribed in this section. If \bou detect an\b unusual
sounds, vibrations or smells, be sure to check for the
cause or have a RENAULT dealer do it promptl\b. In
addition, \bou should notif\b a RENAULT dealer if \bou
think that repairs are required.
When performin\f an\b checks or maintenance work,
closel\b observe “Maintenance precautions” (P.8-4) .
EXPLANATION OF GENERAL MAINTE-
NANCE ITEMS
Additional information on the following items
with
“*”is found later in this section.
Outside vehicle
The maintenance items listed here should be per-
formed from time to time, unless otherwise specified.
Doors and engine hood:
Check that all doors and the en\fine hood operate
properl\b. Also make sure that all latches lock securel\b.
Lubricate hin\fes and latches if necessar\b. Make sure
that the secondar\b latch of the en\fine hood keeps the
hood from openin\f when the primar\b latch is released.
When drivin\f in areas usin\f road salt or other
corrosive materials, check lubrication frequentl\b.
Lights*:
Clean the headli\fhts on a re\fular basis. Make sure that
the headli\fhts, stop li\fhts, tail li\fhts, turn si\fnal li\fhts,
and other li\fhts are all operatin\f properl\b and installed
securel\b. Also check the aim of the headli\fhts.
MAINTENANCE REQUIREMENTS GENERAL MAINTENANCE
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Tires*:
Check the pressure with a gauge often and alwa\fs
prior to long distance trips. If necessar\f, ad\bust the
pressure in all tires, including the spare, to the
pressure specified. Check carefull\f for damage, cuts
or excessive wear.
Tire rotation*:
Tires should be rotated ever\f 10,000 km (6,000
miles) . However, the timing for tire rotation ma\f var\f
according to \four driving habits and the road surface
conditions.
Wheel alignment and balance (for Europe):
If the vehicle should pull to either side while driving on
a straight and level road, or if \fou detect uneven or
abnormal tire wear, there ma\f be a need for wheel
alignment.
If the steering wheel or seat vibrates at normal highwa\f
speeds, wheel balancing ma\f be needed.
Windshield:
Clean the windshield on a regular basis. Check the
windshield at least ever\f six months for cracks or other
damage. Have a damaged windshield repaired b\f a
qualified repair facilit\f.
Wiper blades*:
Check for cracks or wear if the\f do not wipe properl\f.
Inside vehicle
The maintenance items listed here should be checked
on a regular basis, such as when performing periodic
maintenance, cleaning the vehicle, etc.Accelerator pedal:
Check the pedal for smooth operation and make sure
that the pedal does not catch or require uneven effort.
Keep the floor mats awa\f from the pedal.
Brake pedal*:
Check the pedal for smooth operation and make sure
that it has the proper distance under it when
depressed full\f. Check the brake booster function.
Keep the floor mats awa\f from the pedal.
Parking brake*:
Check that the pedal/lever has the proper distance of
travel.
Seat belts:
Check that all parts of the seat belt s\fstem (for
example, buckles, anchors, ad\busters and retractors)
operate properl\f and smoothl\f, and that the\f are
installed securel\f. Check the belt webbing for cuts,
fra\fing, wear or damage.
Steering wheel:
Check for changes in the steering conditions, such as
excessive free pla\f, hard steering or strange noises.
Warning lights and chimes:
Make sure that all warning lights and chimes are
operating properl\f.
Windshield defogger:
Check that the air comes out of the defogger outlets
properl\f and in good quantit\f when operating the
heater or air conditioner.
Windshield wiper and washer*:
Check that the wipers and washer operate properl\f
and that the wipers do not streak.
Under hood and vehicle
The maintenance items listed here should be checked
periodicall\f (for example, each time \fou check the
engine oil or refuel) .
Battery*:
Check the fluid level in each cell. It should be between
the UPPER and LOWER levels. Vehicles operated in
high temperatures or under severe conditions require
frequent checks of the batter\f fluid level.
Brake and clutch fluid level*:
Make sure that the brake and clutch fluid level is
between the MAX and MIN lines on the reservoir.
Engine coolant level*:
Check the coolant level when the engine is cold.
Engine drive belts*:
Make sure the drive belts are not fra\fed, worn, cracked
or oil\f.
Engine oil level*:
Check the level on the dipstick after parking the vehicle
on a level surface and turning off the engine.
Fluid leaks:
Check under the vehicle for fuel, oil, water or other fluid
leaks after the vehicle has been parked for a while.
Water dripping from the air conditioner after use is
normal. If \fou should notice an\f leaks or if fuel fumes
are evident, check for the cause and have it corrected
immediatel\f.
Maintenance and do-it-yourself8-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SDI2578HR12DE engine modelJVM0001XHR15DE engine model1. Oil fille\f cap
2. Oil \b\fain plug
3. Oil filte\f
1. Pa\fk the vehicle on a level su\fface an\b apply the pa\fking b\fake.
2. Tu\fn the engine off.
3. D\fain the engine oil acco\f\bing to the p\fope\f p\foce\bu\fe. (See “Engine oil \feplacement
(HR12DDR, HR12DE an\b HR15DE engine mo\b-
els)” (P.8-11) .) 4. Loosen the oil filte\f with an oil filte\f w\fench.
Depen\bing on the engine mo\bel, a special cap
type w\fench may be \fequi\fe\b. See a RENAULT
\beale\f fo\f mo\fe info\fmation.
5. Remove the oil filte\f by tu\fning it by han\b.
6. Wipe the engine oil filte\f mounting su\fface with a clean cloth.
Be su\fe to \femove any ol\b gasket \femaining on the
mounting su\fface.
7. Apply the new engine oil to the gasket of the new oil filte\f.
8. Sc\few in the oil filte\f until a slight \fesistance is felt, an\b then tighten an a\b\bitional 2/3 of tu\fn to
secu\fe the oil filte\f.
Oil filter tightening torque:15 to 20 N·m (11 to 14 ft-lb)
9. Refill the engine oil. (See “Engine oil \feplacement (HR12DDR, HR12DE an\b HR15DE engine mo\b-
els)” (P.8-11) .)
10. Sta\ft the engine an\b check fo\f leakage a\foun\b the oil filte\f. Co\f\fect as \fequi\fe\b.
11. Tu\fn the engine off an\b wait seve\fal minutes.
12. Check the engine oil level acco\f\bing to the p\fope\f p\foce\bu\fe. (See “Checking engine oil level” (P.8-
10) .)
Maintenance and do-it-yourself8-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-14Maintenance and do-it-yourself
Engine oil and filter replacement \fK9K engine
model)
\bDI2472
1. Oil drain plug
2. Oil filter
1. Place a large drain pan under the drain plug.
2. Remove the drain plug with a wrench.
3. Remove the oil filler cap and completely drain the oil.
If the oil filter is to be changed, remove and
replace it at this time.
CAUTION:
Waste oil must be disposed of properly. Check
your local regulations.
4. Loosen the oil filter with an oil filter wrench.
5. Remove the oil filter by turning it by hand.
6. Wipe the entire oil filter mounting surface with aclean cloth.
Be sure to remove any old gasket remaining on the
mounting surface. 7. Apply new engine oil to the gasket on the new oil
filter.
8. \bcrew in the oil filter until a slight resistance is felt, and then tighten an additional 3/4 of a turn to
secure the filter.
Oil filter tightening torque:16 to 20 N·m (1.6 to 2.0 kg-m, 12 to 15 ft-lb)
9. Clean and reinstall the drain plug and new washer. \becurely tighten the drain plug with a wrench. Do
not use excessive force.
Drain plug tightening torque:16 to 24 N·m (1.6 to 2.4 kg-m, 12 to 18 ft-lb)
10. Refill the recommended engine oil and quantity. \f\bee “Recommended fuel/lubricants and capaci-
ties” \fP.9-2) .)
11. \becurely install the oil filler cap.
12. \btart the engine.
13. Check the drain plug and the oil filter for any sign of leakage.
14. Dispose of the used oil in the proper manner. Check your local regulations.
15. Check the engine oil level according to the proper procedure. \f\bee “Checking engine oil level” \fP.8-
10) .)
After operation
1. Install the engine undercover \fif removed) intoposition as the following steps.
a. Pull the center of each plastic clip out.
b. Hold the engine undercover into position.
c. Insert the clips through the undercover into thehole in the frame, then push the center of the
clips in to lock the clips in place. d. \bcrew in the bolts, then tighten them.
2. Lower the vehicle carefully to the ground.
PROTECT ENVIRONMENT
It is illegal to pollute drains, watercourses and soil. Use
authorized waste collection facilities, including civil
amenity sites and garages providing facilities for
disposal of used oil and used oil filters. If in doubt,
contact your local authority for advice on disposal.
The regulations concerning the pollution of the
environment will vary from country to country.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-18Maintenance and do-it-yourself
Self-adjusting brakes
\four vehi\ble is equipped with self-adjusting brakes.
The brakes are adjusted by the foot brake pedal
operation.
Brake pad wear indi\bator
The dis\b brake pads on your vehi\ble have audible wear
indi\bators. When a brake pad requires repla\bement, it
will make a high pit\bhed s\braping or s\bree\bhing sound
when the vehi\ble is in motion. The noise will be heard
whether or not the foot brake pedal is depressed. Have
the brakes \bhe\bked as soon as possible if the wear
indi\bator sound is heard.
Under some driving or \blimate \bonditions, o\b\basional
brake squeaks, squeals or other noises may be heard.
O\b\basional brake noise during light to moderate stops
is normal and does not affe\bt the fun\btion or
performan\be of the brake system.
The rear drum brakes do not have audible wear
indi\bators. Should you ever hear an unusually loud
noise from the rear drum brakes, have them \bhe\bked
as soon as possible by a RENAULT dealer.
Proper brake inspe\btion intervals should be followed.
For additional information, see a separate maintenan\be
booklet.
BRAKE BOOSTER
Che\bk the brake booster fun\btion as follows:
1. With the engine off, depress and release the footbrake pedal several times. When the foot brake
pedal movement (distan\be of travel) remains the
same from one pedal appli\bation to the next,
\bontinue on to the next step.
2. While depressing the foot brake pedal, start the engine. The pedal height should drop a little. 3. With the foot brake pedal depressed, stop the
engine. Keep the pedal depressed for about 30
se\bonds. The pedal height should not \bhange.
4. Run the engine for 1 minute without depressing the foot brake pedal, then turn it off. Depress the
foot brake pedal several times. The pedal travel
distan\be will de\brease gradually with ea\bh de-
pression as the va\buum is released from the
booster.
If the brakes do not operate properly, have the brakes
\bhe\bked by a RENAULT dealer.
WARNING:
. Use only new fluid from a sealed container.
Old, inferior, or contaminated fluid may
damage the brake system. The use of
improper fluids can damage the brake
system and affect the vehicle’ s stopping
ability.
. Clean the filler cap before removing.
. Brake fluid is poisonous and should be
stored carefully in marked containers out
of the reach of children.
CAUTION:
Do not spill the fluid on painted surfaces. This
will damage the paint. If fluid is spilled, wash it
off with plenty of water immediately.
SDI0890
Che\bk the fluid level in the reservoir. If the brake fluid is
below the MIN line, the brake warning light will
illuminate. Add brake fluid up to the MAX line. (See
“Re\bommended fuel/lubri\bants and \bapa\bities” (P.9-2)
for re\bommended types of brake fluid.)
If the brake fluid must be added frequently, the brake
BRAKE FLUID
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
PASSENGER COMPARTMENT
SDI2576
For all models
JVC\f\f23X
For Stop/Start (Idling Stop) System (if equipped)
CAUTION:
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If \bny electric\bl equipment does not oper\bte, check for
\bn open fuse.1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the he\bdlight switch is in the “OFF” position.
3. Remove the fuse box cover
*1with \b suit\bble
tool.
4. Loc\bte the fuse th\bt needs to be repl\bced.
5. Remove the fuse using the fuse puller
*2.
SDI1754
6. If the fuse is open*A, repl\bce it with \b new fuse*B.
If the new fuse \blso opens, \bfter inst\blling, h\bve the
electric\bl system checked, \bnd if necess\bry rep\bired,
by \b RENAULT de\bler.
Extended stor\bge fuse switch (if equipped)
SDI27\f5
If \bny electric\bl equipment does not oper\bte, remove
the extended stor\bge fuse switch \bnd check for \bn
open fuse.
Maintenance and do-it-yourself8-27
&RQGLWLRQ