storing the driver’s seat position ...........(up to the end of the DU)
1.18
ENG_UD1745_1
Mémorisation du siège conducteur (X81 - Renault)
ENG_NU_932-3_X81ph3_Renault_1
sTOrInG THe drIVer’s sea T POsITIOn
It is possible to store a driving position
using the RENAULT Card.
A driving position includes the driver’s
seat position and door mirror settings.
When a driving position is stored, the
seat and door mirror settings linked to
the RENAULT Card used are automati-
cally recalled when the doors are un -
locked and opened using the RENAULT
Card.
The system operates:
– hands-free RENAULT card de -
tected or, depending on the vehicle,
RENAULT remote control in ‘acces-
sories’ position in the card reader;
– when the driver ’s door is opened,
with the ignition off, for about 40 min-
utes.
driver’s seat memory
procedure
With the ignition on, adjust the seat
using switches 1 and 3 (see informa -
tion on “Front seats with electric con -
trol” in Section 1).
Press button 2 until you hear a beep:
the driving position is stored.
Repeat this procedure for each of the
RENAULT Cards.
recalling a stored position
With the vehicle stationary, briefly
press button 2.
note: recall of the stored position is in-
terrupted if one of the seat adjustment
buttons is pressed during recall.
When driving, it is possible to adjust
the driving position, but it is not possible
to recall a driving position.
special case
s everal hands-free cards in the ve -
hicle.
In this case:
– there is no automatic recall;
– it is possible to recall the driving po-
sition by inserting the RENAULT
card in the card reader and pressing
button 2.
2
31
