bonnet.................................................................... (current page)
levels ..................................................................... (current page)
4.2
ENG_UD24344_2
Capot moteur (X81 - J81 - Renault)
ENG_NU_932-3_X81ph3_Renault_4
Jaune NoirNoir texte
To open the bonnet, pull handle 1.
Unlocking the bonnet catchTo unlock, lift catch 2.
Bonnet
Bonnet (1/2)
1
2
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
In the event of even a slight
impact involving the radia -
tor grille or bonnet, have
the bonnet lock checked by
an approved Dealer as soon as pos-
sible.
Do not press down on the
bonnet: there is a risk that
the bonnet will close inad -
vertently.
JauneNoirNoir texte
4.3
ENG_UD24344_2
Capot moteur (X81 - J81 - Renault)
ENG_NU_932-3_X81ph3_Renault_4
Closing the bonnet
Before closing the bonnet, check to
make sure that nothing has been left
in the engine compartment. To close
the bonnet again, hold the bonnet in
the middle and lower it to 30 cm above
the closed position, then release it. It
will latch automatically under its own
weight.
Bonnet (2/2)
Before opening the bonnet,
remember to return the
windscreen wiper stalk to
park position (refer to the in-
formation on the “Windscreen wash/
wipe” in Section 1).
Ensure that the bonnet is
properly locked.
Check that nothing is pre -
venting the catch from lock-
ing (gravel, cloth, etc.).
opening the bonnetLift the bonnet; you will need to guide it
as it is held by a strut.
After carrying out any work
in the engine compart -
ment, check that nothing
has been left behind (cloth,
tools, etc.).
These may damage the engine or
cause a fire.
