2012 Ram 5500 Chassis Cab radio

[x] Cancel search: radio

Page 226 of 508

Ram 5500 Chassis Cab 2012  Owners Manual MEDIA CENTER 130 (SALES CODE RES)
NOTE:The radio sales code is located on the lower right
side of the radio faceplate.
Operating Instructions — Radio Mode
NOTE:The ignition switch must be in the ON

Page 227 of 508

Ram 5500 Chassis Cab 2012  Owners Manual SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
to seek up and the left switch to seek down. The radio
will remain tuned

Page 229 of 508

Ram 5500 Chassis Cab 2012  Owners Manual SET 2 in both AM and FM. This allows a total of 12 AM
and 12 FM stations to be stored into pushbutton memory.
The stations stored in SET 2 memory can be selected by
pressing the pushbutton twice.
Ever

Page 230 of 508

Ram 5500 Chassis Cab 2012  Owners Manual If you insert a disc with the ignition ON and the radio
ON, the unit will switch from radio to CD mode and
begin to play when you insert the disc. The display will
show the track number, and index tim

Page 231 of 508

Ram 5500 Chassis Cab 2012  Owners Manual the current selection. Pressing and holding the SEEK
button will allow faster scrolling through the tracks in
CD and MP3 modes.
TIME Button
Press this button to change the display from a large CD
play

Page 232 of 508

Ram 5500 Chassis Cab 2012  Owners Manual Supported Medium Formats (File Systems)
The medium formats supported by the radio are ISO 9660
Level 1 and Level 2 and includes the Joliet extension.
When reading discs recorded using formats other th

Page 233 of 508

Ram 5500 Chassis Cab 2012  Owners Manual When using the MP3 encoder to compress audio data to
an MP3 file, the bit rate and sampling frequencies in the
following table are supported. In addition, variable bit
rates (VBR) are also supported.

Page 234 of 508

Ram 5500 Chassis Cab 2012  Owners Manual To increase the speed of disc loading, it is recommended
to use CD-R media and single-session discs. To create a
single-session disc, enable the “Disc at Once” option
before writing to the disc.
O