Page 13 of 208
3
3
3
3
9
3
11
FAMILIARISATION
   
 
Interior  
 
  Lighting off. 
  Sidelamps. 
 
Dipped beam headlamps (green).  
Main beam headlamps (blue). 
 
2   fast.  
1   normal.  
I   intermittent.  
0   off.  
   È 
 single wipe. 
  AUTO, press the stalk down. 
  AUTO, automatic 
illumination of headlamps. 
  48    51    In cruise control mode, the vehicle speed 
must be higher than 25 mph (40 km/h) 
with at least 4th gear engaged. 
  53, 56  
  47  
 
 
SEEING CLEARLY   DRIVING SAFELY 
 
 
Motorway function: 
 press up or down 
once, without passing the point of 
resistance; the corresponding direction 
indicators will fl ash three times.     
Lighting stalk    
Wiper stalk    
Cruise control, Speed limiter 
   
Hill start assist 
   
Peugeot Connect Sound  
 
  52, 129  
 
     
Special position of the windscreen 
wipers 
  In the minute after switching off the 
ignition, any action on the wiper stalk 
positions the wipers vertically at the 
sides of the windscreen.  
     
        
        Page 50 of 208

48
   
 
Steering mounted controls  
 
 
 
 
 
DIRECTION INDICATORS 
 
 
"Motorway" function 
  Press the control up or down to fl ash 
the corresponding direction indicator 
three times.  
 
 
 
LIGHTING CONTROL 
 
 
Left 
: downwards passing the 
point of resistance. 
   
Right 
: upwards passing the 
point of resistance.     
Front and rear lighting 
  Selection is by turning ring  A 
.   Lighting off 
  Automatic illumination of 
headlamps 
  Sidelamps 
  Dipped beam (green) 
  Main beam (blue)  
   
Dipped beam/main beam change 
  Pull the stalk fully towards you.  
   
Lighting-on buzzer 
  On switching of the ignition, all of the 
lamps turn off, except dipped beam if 
automatic guide-me-home lighting has 
been activated. 
  To activate the lighting control, turn 
ring  A 
 to the lighting off position "0" 
then to the selection of your choice. 
  On opening the driver's door, there 
is an audible warning if you have left 
the lighting on.     
Checking by means of 
the indicator lamps on the 
instrument panel is described in 
the "Instruments and controls" 
section of chapter 2.     
Direction indicators  
     
        
        Page 61 of 208
   
 
Ventilation  
 
59
EASE OF USE and COMFOR
T
33
 VENTILATION 
 
the side vents and the central 
vents, 
   
Air flow 
 
the footwells, 
  the windscreen and the 
footwells, 
  the windscreen. 
  The air distribution can be 
modulated by placing the 
control in the intermediate 
positions, marked "●".  
 
 
Manual settings: 
   
Air distribution 
 
The air supply distribution is 
determined by the following symbols:    in the red zone, provides 
heating of the passenger 
compartment.     Control positioned: 
  in the blue zone, provides 
ambient air,   The speed of the blown air at 
the vents varies from 1 to the 
fastest 4. Position 0 switches 
it off.     
 
Heating control panel    
Air conditioning control panel  
 
  Adjust this control in order to attain the 
desired comfort level.  
 
Temperature  
     
        
        Page 143 of 208
9.3
   
The Peugeot Connect Navigation (RNEG) is protected in such a way that it will only operate in your vehicle.
Peugeot Connect Navigation(RNEG) 
 
 
For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary.
  When the en
gine is switched off and to prevent 
discharging of the battery, the Peugeot Connect 
Navigation (RNEG) switches off following the activation of the Energy Economy mode.
   
MULTIMEDIA AUDIO SYSTEM / BLUETOOTH ® 
 TELEPHONE 
 
SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD 
 
 
01  First steps       
CONTENTS  
   
02  Steering mounted controls   
   
03  General operation   
   
04  Navigation - Guidance   
   
05  Traffic information   
   
06 Radio   
   
07  Music media players   
   
08 Bluetooth 
® 
 telephone   
   
09 Configuration   
   
10  Trip computer   p.  
p.  
p.  
p.  
p.  
p.  
p.  
p.  
p.  
p.  
   
11  Screen menu map   p.   9.4
 9.5
 9.6
 9.9
 9.17
 9.19
 9.20
 9.23
 9.26
 9.27
 9.28
   
Frequently asked questions   p.   9.32 
     
        
        Page 158 of 208
05
2 1
3
2 1
9.18
   
 
 
 
 
 
PRINCIPAL TMC SYMBOLS 
 
 
With the current audio source displayed 
on the screen, press the dial.  
   
The shortcut menu 
for the source appears and gives access to:
   
Select Traffi c Announcements 
(TA)and press the dial to confi rm and go 
to the associated settings.  
 
TA
 
 
-   the station transmits TA messages. 
 
 
 
 
 
 
RECEIVING TA MESSAGES 
Red and yellow triangle: traffi c information, for example: Black and blue triangle: general in
formation, for example:
TRAFFIC INFORMATION
   
The TA (Traffi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a 
radio station transmitting this type of message. When a traffi c 
report is transmitted, the current audio source (Radio, CD, ...) is 
interrupted automatically to play the TA message. Normal playbackof the audio source resumes at the end of the transmission of themessage.   
-   the station does not transmit TA messa
ges.
   
-  
TA messages are not activated.  
  
     
        
        Page 163 of 208

08
1
2
3
4
9.23
BLUETOOTH®   TELEPHONE®
*    
The services available depend on the network, the SIM card and thecompatibility of the Bluetooth telephone used. Check the telephone 
manual and with your network provider for details of the servicesavailable to you.  
 
 
 
 
 
 
 
 
 
 
 
 
PAIRING A TELEPHONE /  
FIRST CONNECTION  
 
 
 
For reasons of safety and because they require prolonged attentionon the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the Peugeot ConnectNavigation must be carried out with the vehicle stationary.The ignition must be on.
   
Activate the telephone's Bluetooth 
function
and ensure that it is "visible to all" (refer to the
telephone instructions).  Enter the authentication code on the tele
phone. 
The code to be entered is displayed on the screen
of the system. 
Some telephones offer automatic reconnection o
f 
the telephone every time the ignition is switched on. 
  A messa
ge confi rms the pairing.  
   
To change the telephone connected, press the PHONE button, then select Phone Menu and press the dial toconfi rm.
Once the telephone has been connected, Peugeot Connect 
Navigation can synchronise the address book and the call list.
This synchronisation may take a few minutes * . Pairin
g can also be started from the telephone (refer to the
telephone instructions).
Visit www.peugeot.co.uk for more information (compatibility, more help, ...).  
Press the PHONE button.     
For a 
fi rst connection, select"Search phone" and press the dial to confi rm. Then select the name of thetelephone.
Search 
phone 
     
        
        Page 164 of 208

08
1
2
2
1
9.24
   * 
   
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services 
available to you.
  BLUETOOTH ®TELEPHONE ®
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CONNECTING A TELEPHONE  
 
For reasons of safety and because they require prolonged attention 
on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the Peugeot Connect 
Navigation must be carried out with the vehicle stationary.
The ignition must be on.  
   
Activate the tele
phone's Bluetooth function and ensure that it is "visible to all" (refer to the 
telephone instructions).
The last telephone connected is reconnected automatically.
  A messa
ge confi rms the connection.  When a telephone is alread
yconnected, to change it press the 
PHONE button, then select PhoneMenu and press the dial to confi rm.    
Once the telephone has been connected, Peugeot Connect Navigation can synchronise the address book and the call list.This synchronisation may take a few minutes * 
.  
   
The list o
f telephones connected previously (4 maximum) appearson the multifunction screen. Select the telephone required for a
new connection. Visit www.peu
geot.co.uk for more information (compatibility, more 
help, ...).
   
Pr
ess the PHONE button.Select "Connect 
phone". Select the 
telephone and press to confi rm.
Connect 
phone 
     
        
        Page 165 of 208

08
1
3 2
2 1
9.25
Select the "Yes" tab to accept or "No"
to refuse and confi rm by pressing 
the dial. 
   
RECEIVING A CALL    
MAKING A CALL 
 
 An incoming call is announced by a ring and a superimposed 
display on the multifunction screen.
Yes
To han
g up, press the PHONE button
or press the dial and select "End call"then confi rm by pressing the dial.
End callPress the PH
ONE button.  
  Select "Dial number"
, then dial the 
telephone number using the virtualkeypad.
Select the Phone Menu function and 
press the dial to confi rm.     
The list of the last 2
0 calls made and received in the vehicle 
appears under Phone Menu. You can select a number and press
the dial to make the call.  
No
 
 
It is also possible to select a number from the address book. You can select "Dial from address book". The Peugeot Connect
Navigation can record up to 1 000 entries (telephone numbers).
  Press the end o
f the steering mounted control for more than twoseconds to gain access to the address book. 
Phone Menu
Dial number
   
It is possible to make a call directl
y from the telephone; park the 
vehicle as a safety measure. 
BLUETOOTH ®   TELEPHONE ®
   
 
Press the end of the steering mounted control to 
accept the call or end the call in progress.To delete a number, press the PHONE button then press and hold 
on a call number to display a list of actions including:Delete entryDelete list