2012 Peugeot M59 driver seat adjustment

5 FAMILIARISATION
-
INSTRUMENTS AND CONTROLS


11 .
Driver’s airbag.
Horn.

12.
Wiper/screenwash controls.

13.
Audio system steering mounted
controls.

14.
Steering lock and ignition.

15.
Fusebox.

16.
Passenger’s airbag deactivation
switch.

17.
Alarm.

18.
Steering wheel adjustment
control.

19.
Passenger’s electric mirror
control.

20.
Headlamp height adjustment.

21.
Heated seats control.
22.
Parking brake.

23.
Cigarette lighter.

24.
Portable ashtray.

25.
Gear lever.

26.
Storage compartment.

27.
Heating/air conditioning controls.

28.
Audio system.

29.
Lower glove box.

30.
Upper glove box or passenger’s
airbag.

31.
Bonnet release lever.

32.
Side adjustable heating/
ventilation vents.

33.
Door window demisting vents.

1.
Speaker (tweeter).

2.
Windscreen demisting vents.

3.
Controls:


- Electric windows.

- Rear door windows demisting.

- Air conditioning.

4.
Central locking button.

5.
Multifunction screen or clock.

6.
Hazard warning lamps switch.

7.
Central adjustable heating/
ventilation vents.

8.
Lighting and direction indicator
control stalk.

9.
Speed limiter/cruise control
switches.

10.
Instrument panel.

FAMILIARISATION10 -
STEERING WHEEL HEIGHT ADJUSTMENT


)
When stationary, push the control
A
forwards to release the steering
wheel adjustment mechanism.

)
Adjust the height of the steering
wheel.

)
Lock the steering wheel adjust-
ment it by pulling control A
to-
wards you fully.


1.
Driver’s electric window.


2.
Passenger’s electric window.




DOOR MIRRORS



)
Move the manual control 3
in all
four directions to adjust.


Electric control for the
passenger’s side mirror


)
From the driver’s seat, adjust in
all four directions by operating
the control 4
.
Manual mode:


)
Press the switch. The window
stops as soon as the switch is re-
leased.


Automatic mode (driver):


)
Press and hold the switch. One
touch completely opens or closes
the window.



56




57



60

35SEATS-
FRONT SEATS




The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.


To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
4. Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
1. Head restraint height
adjustment
To raise or lower the restraint, slide it.

2. Armrests
These can be folded back.
3. Seat back angle adjustment

6. Access to rear seats
(version with one
sliding side door only)

5. Heated seats switch
Press the switch. The temperature is
controlled automatically.

Pressing the switch again stops operation.

Note:
the command for activation
of heating of the seat(s) remains
memorised for two minutes after the
ignition has been switched off. No person or object must pre-
vent the seat from returning to
its initial position; return to this
position is necessary for the
seat to lock in place.


A.
Turn the knob.

B.
Pull the lever (version
with one sliding side
door only).

Never drive with the head re-
straints removed; they must
be in place and correctly ad-
justed.
Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver's side).

45SEATS-





The driver must ensure that
the passengers use the seat
belts correctly and that they
are all properly restrained
before setting off.
Wherever you are seated in the ve-
hicle, always fasten your seat belt,
even for short journeys.
Do not invert the seat belt buckles as
they will not fulfi l their role fully.
If the seats have armrests * , the lap
part of the seat belt must always
pass under the armrest.
The seat belts are fi tted with an inertia
reel permitting automatic adjustment
of the length of the strap to your size.
The seat belt is stored automatically
when not in use.
Before and after use, ensure that the
seat belt is reeled in correctly.
The lower part of the strap must be
positioned as low as possible on the
pelvis.
The upper part must be positioned in
the hollow of the shoulder.
The inertia reels are fi tted with an auto-
matic locking device which comes into
operation in the event of a collision, on
emergency braking or if the vehicle
rolls over. You can release the device
by pulling rapidly on the strap and re-
leasing it.
In order to be effective, a seat belt:


- must be tightened as close to the
body as possible,

- must restrain one adult only,

- must not bear any trace of cuts or
fraying,

- must be pulled in front of you with
a smooth movement, checking
that it does not twist,

- must not be transformed or modifi ed
to avoid altering its performance.
In accordance with current safety
regulations, all repairs and checks
must be carried out by a PEUGEOT
dealer who guarantees that the work
is carried out correctly.
Have your seat belts checked regu-
larly by a PEUGEOT dealer and par-
ticularly if the straps show signs of
damage.
Clean the seat belt straps with soapy
water or a textile cleaning product,
sold by PEUGEOT dealers.

*
According to model.
Recommendations for children:


- use a suitable child seat if the pas-
senger is less than 12 years old or
shorter than one metre fi fty,

- do not use the strap-guide * when
a child seat is installed,

- never use the same seat belt to
secure more than one person,

- never allow a child to travel on
your lap.

Depending on the nature and se-
riousness of the impacts
, the pre-
tensioning device may be triggered
before and independently of the
airbags. Triggering of the pre-tensioners
is accompanied by a slight emission of
harmless smoke and a noise, due to
the activation of the pyrotechnic car-
tridge incorporated in the system.
In all cases, the airbag warning lamp
comes on.
Following an impact, have the seat
belts system checked, and if neces-
sary replaced, by a PEUGEOT dealer.


After folding or moving a
seat or rear bench seat,
ensure that the seat belt
is positioned and rolled up
correctly.

COMFORT AND SAFETY
60 -
STEERING WHEEL
ADJUSTMENT HEADLAMPADUSTMENT HORN
HAZARD WARNING LIGHT
S
Press the button, the direction indicators
fl ash.

They can operate with the ignition off. Press one of the spokes or
the centre of the steering
wheel.


0 -
With no load.

1 -
With partial load.

2 -
With average load.

3 -
With maximum authorised load.


0
- 1 or 2 people in the front seats.

-
- 3 people.

1
- 4 or 5 people.

2 -
4 or 5 people + maximum author-
ised load.

3 -
Driver + maximum authorised load.

Initial setting is position 0.

Depending on the load in your vehi-
cle, it is recommended that the head-
lamp beam is adjusted. When stationary, lower the handle
to release the steering wheel adjust-
ment mechanism.
Adjust it to the desired height, then lift
the handle to lock the steering wheel
adjustment mechanism.